Update to unmodified libssh2 1.8.2

CMakeLists.txt

@@ -0,0 +1,109 @@
+# Copyright (c) 2014, 2015  Alexander Lamaison <alexander.lamaison@gmail.com>
+#
+# Redistribution and use in source and binary forms,
+# with or without modification, are permitted provided
+# that the following conditions are met:
+#
+#   Redistributions of source code must retain the above
+#   copyright notice, this list of conditions and the
+#   following disclaimer.
+#
+#   Redistributions in binary form must reproduce the above
+#   copyright notice, this list of conditions and the following
+#   disclaimer in the documentation and/or other materials
+#   provided with the distribution.
+#
+#   Neither the name of the copyright holder nor the names
+#   of any other contributors may be used to endorse or
+#   promote products derived from this software without
+#   specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+# CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+# INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+# OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+# CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+# SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+# NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
+# USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
+# OF SUCH DAMAGE.
+
+cmake_minimum_required(VERSION 2.8.11)
+
+set(CMAKE_MODULE_PATH ${CMAKE_CURRENT_SOURCE_DIR}/cmake)
+
+project(libssh2 C)
+set(PROJECT_URL "https://www.libssh2.org/")
+set(PROJECT_DESCRIPTION "The SSH library")
+
+if (CMAKE_VERSION VERSION_LESS "3.1")
+  if (CMAKE_C_COMPILER_ID STREQUAL "GNU")
+    set (CMAKE_C_FLAGS "--std=gnu90 ${CMAKE_C_FLAGS}")
+  endif()
+else()
+  set (CMAKE_C_STANDARD 90)
+endif()
+
+option(BUILD_SHARED_LIBS "Build Shared Libraries" OFF)
+
+# Parse version
+
+file(READ ${CMAKE_CURRENT_SOURCE_DIR}/include/libssh2.h _HEADER_CONTENTS)
+string(
+  REGEX REPLACE ".*#define LIBSSH2_VERSION[ \t]+\"([^\"]+)\".*" "\\1"
+  LIBSSH2_VERSION "${_HEADER_CONTENTS}")
+string(
+  REGEX REPLACE ".*#define LIBSSH2_VERSION_MAJOR[ \t]+([0-9]+).*" "\\1"
+  LIBSSH2_VERSION_MAJOR "${_HEADER_CONTENTS}")
+string(
+  REGEX REPLACE ".*#define LIBSSH2_VERSION_MINOR[ \t]+([0-9]+).*" "\\1"
+  LIBSSH2_VERSION_MINOR "${_HEADER_CONTENTS}")
+string(
+  REGEX REPLACE ".*#define LIBSSH2_VERSION_PATCH[ \t]+([0-9]+).*" "\\1"
+  LIBSSH2_VERSION_PATCH "${_HEADER_CONTENTS}")
+
+if(NOT LIBSSH2_VERSION OR
+   NOT LIBSSH2_VERSION_MAJOR MATCHES "^[0-9]+$" OR
+   NOT LIBSSH2_VERSION_MINOR MATCHES "^[0-9]+$" OR
+   NOT LIBSSH2_VERSION_PATCH MATCHES "^[0-9]+$")
+  message(
+    FATAL_ERROR
+    "Unable to parse version from"
+    "${CMAKE_CURRENT_SOURCE_DIR}/include/libssh2.h")
+endif()
+
+include(GNUInstallDirs)
+install(
+  FILES docs/AUTHORS COPYING docs/HACKING README RELEASE-NOTES NEWS
+  DESTINATION ${CMAKE_INSTALL_DOCDIR})
+
+include(max_warnings)
+include(FeatureSummary)
+
+add_subdirectory(src)
+
+option(BUILD_EXAMPLES "Build libssh2 examples" ON)
+if(BUILD_EXAMPLES)
+  add_subdirectory(example)
+endif()
+
+option(BUILD_TESTING "Build libssh2 test suite" ON)
+if(BUILD_TESTING)
+  enable_testing()
+  add_subdirectory(tests)
+endif()
+
+add_subdirectory(docs)
+
+feature_summary(WHAT ALL)
+
+set(CPACK_PACKAGE_VERSION_MAJOR ${LIBSSH2_VERSION_MAJOR})
+set(CPACK_PACKAGE_VERSION_MINOR ${LIBSSH2_VERSION_MINOR})
+set(CPACK_PACKAGE_VERSION_PATCH ${LIBSSH2_VERSION_PATCH})
+set(CPACK_PACKAGE_VERSION ${LIBSSH2_VERSION})
+include(CPack)

COPYING

@@ -2,7 +2,7 @@
  * Copyright (c) 2005,2006 Mikhail Gusarov <dottedmag@dottedmag.net>
  * Copyright (c) 2006-2007 The Written Word, Inc.
  * Copyright (c) 2007 Eli Fant <elifantu@mail.ru>
- * Copyright (c) 2009 Daniel Stenberg
+ * Copyright (c) 2009-2014 Daniel Stenberg
  * Copyright (C) 2008, 2009 Simon Josefsson
  * All rights reserved.
  *

Makefile.OpenSSL.inc

@@ -0,0 +1,2 @@
+CRYPTO_CSOURCES = openssl.c
+CRYPTO_HHEADERS = openssl.h

Makefile.WinCNG.inc

@@ -0,0 +1,2 @@
+CRYPTO_CSOURCES = wincng.c
+CRYPTO_HHEADERS = wincng.h

Makefile.am

@@ -14,10 +14,9 @@ include_HEADERS =			\
 	include/libssh2_sftp.h
 
 NETWAREFILES =  nw/keepscreen.c \
- nw/Makefile \
- nw/Makefile.netware \
- nw/nwlib.c \
- nw/test/Makefile.netware
+	nw/nwlib.c \
+	nw/GNUmakefile \
+	nw/test/GNUmakefile
 
 DSP = win32/libssh2.dsp
 VCPROJ = win32/libssh2.vcproj
@@ -33,8 +32,20 @@ win32/libssh2_config.h win32/config.mk win32/rules.mk		\
 win32/Makefile.Watcom win32/libssh2.dsw win32/tests.dsp $(DSP)	\
 win32/msvcproj.head win32/msvcproj.foot win32/libssh2.rc
 
-EXTRA_DIST = $(WIN32FILES) buildconf $(NETWAREFILES) get_ver.awk HACKING \
- maketgz NMakefile TODO RELEASE-NOTES libssh2.pc.in $(VMSFILES)
+OS400FILES = os400/README400 os400/initscript.sh os400/make.sh		\
+os400/make-src.sh os400/make-rpg.sh os400/make-include.sh		\
+os400/os400sys.c os400/ccsid.c						\
+os400/libssh2_config.h os400/macros.h os400/libssh2_ccsid.h		\
+os400/include/alloca.h os400/include/sys/socket.h os400/include/stdio.h	\
+os400/libssh2rpg/libssh2.rpgle.in					\
+os400/libssh2rpg/libssh2_ccsid.rpgle.in					\
+os400/libssh2rpg/libssh2_publickey.rpgle				\
+os400/libssh2rpg/libssh2_sftp.rpgle					\
+Makefile.os400qc3.inc
+
+EXTRA_DIST = $(WIN32FILES) buildconf $(NETWAREFILES) get_ver.awk \
+ maketgz NMakefile RELEASE-NOTES libssh2.pc.in $(VMSFILES) config.rpath \
+ CMakeLists.txt cmake $(OS400FILES)
 
 ACLOCAL_AMFLAGS = -I m4
 
@@ -76,6 +87,9 @@ gen-coverage:
 coverage: init-coverage build-coverage gen-coverage
 
 # DSP/VCPROJ generation adapted from libcurl
+# only OpenSSL and WinCNG are supported with this build system
+CRYPTO_CSOURCES = openssl.c wincng.c mbedtls.c
+CRYPTO_HHEADERS = openssl.h wincng.h mbedtls.h
 # Makefile.inc provides the CSOURCES and HHEADERS defines
 include Makefile.inc
 

Makefile.inc

@@ -1,7 +1,6 @@
 CSOURCES = channel.c comp.c crypt.c hostkey.c kex.c mac.c misc.c \
  packet.c publickey.c scp.c session.c sftp.c userauth.c transport.c \
- version.c knownhost.c agent.c openssl.c libgcrypt.c pem.c keepalive.c \
- global.c
+ version.c knownhost.c agent.c $(CRYPTO_CSOURCES) pem.c keepalive.c global.c
 
-HHEADERS = libssh2_priv.h openssl.h libgcrypt.h transport.h channel.h \
- comp.h mac.h misc.h packet.h userauth.h session.h sftp.h crypto.h
+HHEADERS = libssh2_priv.h $(CRYPTO_HHEADERS) transport.h channel.h comp.h \
+ mac.h misc.h packet.h userauth.h session.h sftp.h crypto.h

Makefile.libgcrypt.inc

@@ -0,0 +1,2 @@
+CRYPTO_CSOURCES = libgcrypt.c
+CRYPTO_HHEADERS = libgcrypt.h

Makefile.mbedTLS.inc

@@ -0,0 +1,2 @@
+CRYPTO_CSOURCES = mbedtls.c
+CRYPTO_HHEADERS = mbedtls.h

Makefile.os400qc3.inc

@@ -0,0 +1,2 @@
+CRYPTO_CSOURCES = os400qc3.c
+CRYPTO_HHEADERS = os400qc3.h

NMakefile

@@ -1,19 +1,33 @@
 !include "win32/config.mk"
 
+!if "$(WITH_WINCNG)" == "1"
+!include "Makefile.WinCNG.inc"
+!else
+!include "Makefile.OpenSSL.inc"
+!endif
+!include "Makefile.inc"
+
+OBJECTS=$(CSOURCES:.c=.obj)
+
 # SUBDIRS=src example
 SUBDIRS=src
 
-all-sub:
+all-sub: win32\objects.mk
 	-for %D in ($(SUBDIRS)) do $(MAKE) /nologo /f %D/NMakefile BUILD=$(BUILD) SUBDIR=%D all-sub
 
 clean: 
-	-rmdir /s/q $(TARGET)
+	-rmdir 2>NUL /s/q $(TARGET)
+	-del 2>NUL win32\objects.mk
 
-real-clean: clean
-	-del libssh2.dll
-	-del libssh2.exp
-	-del libssh2.ilk
-	-del libssh2.lib
-	-del *.pdb
+real-clean vclean: clean
+	-del 2>NUL libssh2.dll
+	-del 2>NUL libssh2.exp
+	-del 2>NUL libssh2.ilk
+	-del 2>NUL libssh2.lib
+	-del 2>NUL *.pdb
 
+win32\objects.mk: Makefile.inc
+	@echo OBJECTS = \>$@
+	@for %O in ($(OBJECTS)) do @echo $$(INTDIR)\%O \>>$@
+	@echo $$(EOL)>>$@
 

README

@@ -4,94 +4,16 @@ libssh2 - SSH2 library
 libssh2 is a library implementing the SSH2 protocol, available under
 the revised BSD license.
 
-Web site: http://www.libssh2.org/
+Web site: https://www.libssh2.org/
 
-Mailing list: http://cool.haxx.se/mailman/listinfo/libssh2-devel
+Mailing list: https://cool.haxx.se/mailman/listinfo/libssh2-devel
 
-Generic installation instructions are in INSTALL.  Some ./configure
-options deserve additional comments:
+License: see COPYING
 
-	* --enable-crypt-none
+Source code: https://github.com/libssh2/libssh2
 
-		The SSH2 Transport allows for unencrypted data
-		transmission using the "none" cipher.  Because this is
-		such a huge security hole, it is typically disabled on
-		SSH2 implementations and is disabled in libssh2 by
-		default as well.
+Web site source code: https://github.com/libssh2/www
 
-		Enabling this option will allow for "none" as a
-		negotiable method, however it still requires that the
-		method be advertized by the remote end and that no
-		more-preferable methods are available.
-
-	* --enable-mac-none
-
-		The SSH2 Transport also allows implementations to
-		forego a message authentication code.  While this is
-		less of a security risk than using a "none" cipher, it
-		is still not recommended as disabling MAC hashes
-		removes a layer of security.
-
-		Enabling this option will allow for "none" as a
-		negotiable method, however it still requires that the
-		method be advertized by the remote end and that no
-		more-preferable methods are available.
-
-	* --disable-gex-new
-
-		The diffie-hellman-group-exchange-sha1 (dh-gex) key
-		exchange method originally defined an exchange
-		negotiation using packet type 30 to request a
-		generation pair based on a single target value.  Later
-		refinement of dh-gex provided for range and target
-		values.  By default libssh2 will use the newer range
-		method.
-
-		If you experience trouble connecting to an old SSH
-		server using dh-gex, try this option to fallback on
-		the older more reliable method.
-
-  	* --with-libgcrypt
-  	* --without-libgcrypt
-	* --with-libgcrypt-prefix=DIR
-
-		libssh2 can use the Libgcrypt library
-		(http://www.gnupg.org/) for cryptographic operations.
-		Either Libgcrypt or OpenSSL is required.
-
-		Configure will attempt to locate Libgcrypt
-		automatically.
-
- 		If your installation of Libgcrypt is in another
-		location, specify it using --with-libgcrypt-prefix.
-
-	* --with-openssl
-	* --without-openssl
-	* --with-libssl-prefix=[DIR]
-
-		libssh2 can use the OpenSSL library
-		(http://www.openssl.org) for cryptographic operations.
-		Either Libgcrypt or OpenSSL is required.
-
-		Configure will attempt to locate OpenSSL in the
-		default location.
-
-		If your installation of OpenSSL is in another
-		location, specify it using --with-libssl-prefix.
-
-	* --with-libz
-	* --without-libz
-	* --with-libz-prefix=[DIR]
-
-		If present, libssh2 will attempt to use the zlib
-		(http://www.zlib.org) for payload compression, however
-		zlib is not required.
-
-		If your installation of Libz is in another location,
-		specify it using --with-libz-prefix.
-
-	* --enable-debug
-
-		Will make the build use more pedantic and strict compiler
-		options as well as enable the libssh2_trace() function (for
-		showing debug traces).
+Installation instructions are in:
+ - docs/INSTALL_CMAKE for CMake
+ - docs/INSTALL_AUTOTOOLS for Autotools

README.md

@@ -1,10 +1,14 @@
-# libssh2
-
-libssh2 is a client-side C library implementing the SSH2 protocol.
-
-# Building for PHP
-
-libssh2 depends on openssl and zlib. To build follow these steps:
-
-* create a directory named "deps" inside the root of libssh2 source tree and put the dependencies there
-* use win32/libssh2.vcproj to build the libssh2 with VS2008
+# libssh2
+
+libssh2 is a client-side C library implementing the SSH2 protocol.
+
+# Building for PHP
+
+libssh2 depends on openssl and zlib. To build follow these steps:
+
+* create a directory named "deps" at the level of the libssh2 source dir and put the dependencies there
+* build libssh2
+ * use win32/libssh2.vcproj to build with VS2008
+ * use win32/libssh2.vc11.sln to build with VS2012
+ * use win32/libssh2.vc14.sln to build with VS2015
+ * use win32/libssh2.vc15.sln to build with VS2017

RELEASE-NOTES

@@ -1,21 +1,12 @@
-libssh2 1.4.2
+libssh2 1.8.2
 
 This release includes the following bugfixes:
 
- o Return LIBSSH2_ERROR_SOCKET_DISCONNECT on EOF when reading banner
- o userauth.c: fread() from public key file to correctly detect any errors
- o configure.ac: Add option to disable build of the example applications
- o Added 'Requires.private:' line to libssh2.pc
- o SFTP: filter off incoming "zombie" responses
- o gettimeofday: no need for a replacement under cygwin
- o SSH_MSG_CHANNEL_REQUEST: default to want_reply
- o win32/libssh2_config.h: Remove hardcoded #define LIBSSH2_HAVE_ZLIB
+ o Fixed the misapplied userauth patch that broke 1.8.1
+ o moved the MAX size declarations from the public header
 
 This release would not have looked like this without help, code, reports and
 advice from friends like these:
 
- Alexander Lamaison, Rafael Kitover, Guenter Knauf, Peter Stuge,
- Oleksiy Zagorskyi
- 
-        Thanks! (and sorry if I forgot to mention someone)
-
+  Will Cosgrove
+  (1 contributors)

acinclude.m4

@@ -382,3 +382,86 @@ AC_DEFUN([CURL_CONFIGURE_REENTRANT], [
   #
 ])
 
+AC_DEFUN([LIBSSH2_CHECKFOR_MBEDTLS], [
+
+  old_LDFLAGS=$LDFLAGS
+  old_CFLAGS=$CFLAGS
+  if test -n "$use_mbedtls" && test "$use_mbedtls" != "no"; then
+    LDFLAGS="$LDFLAGS -L$use_mbedtls/lib"
+    CFLAGS="$CFLAGS -I$use_mbedtls/include"
+  fi
+
+  AC_LIB_HAVE_LINKFLAGS([mbedtls], [], [
+    #include <mbedtls/version.h>
+  ])
+
+  if test "$ac_cv_libmbedtls" = "yes"; then
+    AC_DEFINE(LIBSSH2_MBEDTLS, 1, [Use mbedtls])
+    LIBSREQUIRED= # mbedtls doesn't provide a .pc file
+    LIBS="$LIBS -lmbedtls -lmbedcrypto"
+    found_crypto=libmbedtls
+    support_clear_memory=yes
+  else
+    # restore
+    LDFLAGS=$old_LDFLAGS
+    CFLAGS=$old_CFLAGS
+  fi
+])
+
+AC_DEFUN([LIBSSH2_CHECKFOR_GCRYPT], [
+
+  old_LDFLAGS=$LDFLAGS
+  old_CFLAGS=$CFLAGS
+  if test -n "$use_libgcrypt" && test "$use_libgcrypt" != "no"; then
+    LDFLAGS="$LDFLAGS -L$use_libgcrypt/lib"
+    CFLAGS="$CFLAGS -I$use_libgcrypt/include"
+  fi
+  AC_LIB_HAVE_LINKFLAGS([gcrypt], [], [
+    #include <gcrypt.h>
+  ])
+
+  if test "$ac_cv_libgcrypt" = "yes"; then
+    AC_DEFINE(LIBSSH2_LIBGCRYPT, 1, [Use libgcrypt])
+    LIBSREQUIRED= # libgcrypt doesn't provide a .pc file. sad face.
+    LIBS="$LIBS -lgcrypt"
+    found_crypto=libgcrypt
+  else
+    # restore
+    LDFLAGS=$old_LDFLAGS
+    CFLAGS=$old_CFLAGS
+  fi
+])
+
+
+AC_DEFUN([LIBSSH2_CHECKFOR_WINCNG], [
+
+  # Look for Windows Cryptography API: Next Generation
+
+  AC_LIB_HAVE_LINKFLAGS([bcrypt], [], [
+    #include <windows.h>
+    #include <bcrypt.h>
+  ])
+  AC_LIB_HAVE_LINKFLAGS([crypt32], [], [
+    #include <windows.h>
+    #include <wincrypt.h>
+  ])
+  AC_CHECK_HEADERS([ntdef.h ntstatus.h], [], [], [
+    #include <windows.h>
+  ])
+  AC_CHECK_DECLS([SecureZeroMemory], [], [], [
+    #include <windows.h>
+  ])
+
+  if test "$ac_cv_libbcrypt" = "yes"; then
+    AC_DEFINE(LIBSSH2_WINCNG, 1, [Use Windows CNG])
+    LIBSREQUIRED= # wincng doesn't provide a .pc file. sad face.
+    LIBS="$LIBS -lbcrypt"
+    if test "$ac_cv_libcrypt32" = "yes"; then
+      LIBS="$LIBS -lcrypt32"
+    fi
+    found_crypto="Windows Cryptography API: Next Generation"
+    if test "$ac_cv_have_decl_SecureZeroMemory" = "yes"; then
+      support_clear_memory=yes
+    fi
+  fi
+])

cmake/CheckFunctionExistsMayNeedLibrary.cmake

@@ -0,0 +1,81 @@
+# Copyright (c) 2014 Alexander Lamaison <alexander.lamaison@gmail.com>
+#
+# Redistribution and use in source and binary forms,
+# with or without modification, are permitted provided
+# that the following conditions are met:
+#
+#   Redistributions of source code must retain the above
+#   copyright notice, this list of conditions and the
+#   following disclaimer.
+#
+#   Redistributions in binary form must reproduce the above
+#   copyright notice, this list of conditions and the following
+#   disclaimer in the documentation and/or other materials
+#   provided with the distribution.
+#
+#   Neither the name of the copyright holder nor the names
+#   of any other contributors may be used to endorse or
+#   promote products derived from this software without
+#   specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+# CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+# INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+# OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+# CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+# SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+# NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
+# USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
+# OF SUCH DAMAGE.
+
+
+# - check_function_exists_maybe_need_library(<function> <var> [lib1 ... libn])
+#
+# Check if function is available for linking, first without extra libraries, and
+# then, if not found that way, linking in each optional library as well.  This
+# function is similar to autotools AC_SEARCH_LIBS.
+#
+# If the function if found, this will define <var>.
+#
+# If the function was only found by linking in an additional library, this
+# will define NEED_LIB_LIBX, where LIBX is the one of lib1 to libn that
+# makes the function available, in uppercase.
+#
+# The following variables may be set before calling this macro to
+# modify the way the check is run:
+#
+#  CMAKE_REQUIRED_FLAGS = string of compile command line flags
+#  CMAKE_REQUIRED_DEFINITIONS = list of macros to define (-DFOO=bar)
+#  CMAKE_REQUIRED_INCLUDES = list of include directories
+#  CMAKE_REQUIRED_LIBRARIES = list of libraries to link
+#
+
+include(CheckFunctionExists)
+include(CheckLibraryExists)
+
+function(check_function_exists_may_need_library function variable)
+
+  check_function_exists(${function} ${variable})
+
+  if(NOT ${variable})
+    foreach(lib ${ARGN})
+      string(TOUPPER ${lib} UP_LIB)
+      # Use new variable to prevent cache from previous step shortcircuiting
+      # new test
+      check_library_exists(${lib} ${function} "" HAVE_${function}_IN_${lib})
+      if(HAVE_${function}_IN_${lib})
+	set(${variable} 1 CACHE INTERNAL
+	  "Function ${function} found in library ${lib}")
+	set(NEED_LIB_${UP_LIB} 1 CACHE INTERNAL
+	  "Need to link ${lib}")
+	break()
+      endif()
+    endforeach()
+  endif()
+
+endfunction()

cmake/CheckNonblockingSocketSupport.cmake

@@ -0,0 +1,119 @@
+include(CheckCSourceCompiles)
+
+# - check_nonblocking_socket_support()
+#
+# Check for how to set a socket to non-blocking state. There seems to exist
+# four known different ways, with the one used almost everywhere being POSIX
+# and XPG3, while the other different ways for different systems (old BSD,
+# Windows and Amiga).
+#
+# One of the following variables will be set indicating the supported
+# method (if any):
+#   HAVE_O_NONBLOCK
+#   HAVE_FIONBIO
+#   HAVE_IOCTLSOCKET
+#   HAVE_IOCTLSOCKET_CASE
+#   HAVE_SO_NONBLOCK
+#   HAVE_DISABLED_NONBLOCKING
+#
+# The following variables may be set before calling this macro to
+# modify the way the check is run:
+#
+#  CMAKE_REQUIRED_FLAGS = string of compile command line flags
+#  CMAKE_REQUIRED_DEFINITIONS = list of macros to define (-DFOO=bar)
+#  CMAKE_REQUIRED_INCLUDES = list of include directories
+#  CMAKE_REQUIRED_LIBRARIES = list of libraries to link
+#
+macro(check_nonblocking_socket_support)
+  # There are two known platforms (AIX 3.x and SunOS 4.1.x) where the
+  # O_NONBLOCK define is found but does not work.
+  check_c_source_compiles("
+#include <sys/types.h>
+#include <unistd.h>
+#include <fcntl.h>
+
+#if defined(sun) || defined(__sun__) || defined(__SUNPRO_C) || defined(__SUNPRO_CC)
+# if defined(__SVR4) || defined(__srv4__)
+#  define PLATFORM_SOLARIS
+# else
+#  define PLATFORM_SUNOS4
+# endif
+#endif
+#if (defined(_AIX) || defined(__xlC__)) && !defined(_AIX41)
+# define PLATFORM_AIX_V3
+#endif
+
+#if defined(PLATFORM_SUNOS4) || defined(PLATFORM_AIX_V3) || defined(__BEOS__)
+#error \"O_NONBLOCK does not work on this platform\"
+#endif
+
+int main()
+{
+    int socket;
+    int flags = fcntl(socket, F_SETFL, flags | O_NONBLOCK);
+}"
+  HAVE_O_NONBLOCK)
+
+  if(NOT HAVE_O_NONBLOCK)
+    check_c_source_compiles("/* FIONBIO test (old-style unix) */
+#include <unistd.h>
+#include <stropts.h>
+
+int main()
+{
+    int socket;
+    int flags = ioctl(socket, FIONBIO, &flags);
+}"
+    HAVE_FIONBIO)
+
+    if(NOT HAVE_FIONBIO)
+      check_c_source_compiles("/* ioctlsocket test (Windows) */
+#undef inline
+#ifndef WIN32_LEAN_AND_MEAN
+#define WIN32_LEAN_AND_MEAN
+#endif
+
+#include <windows.h>
+#include <winsock2.h>
+
+int main()
+{
+    SOCKET sd;
+    unsigned long flags = 0;
+    sd = socket(0, 0, 0);
+    ioctlsocket(sd, FIONBIO, &flags);
+}"
+      HAVE_IOCTLSOCKET)
+
+      if(NOT HAVE_IOCTLSOCKET)
+	check_c_source_compiles("/* IoctlSocket test (Amiga?) */
+#include <sys/ioctl.h>
+
+int main()
+{
+    int socket;
+    int flags = IoctlSocket(socket, FIONBIO, (long)1);
+}"
+        HAVE_IOCTLSOCKET_CASE)
+
+        if(NOT HAVE_IOCTLSOCKET_CASE)
+	  check_c_source_compiles("/* SO_NONBLOCK test (BeOS) */
+#include <socket.h>
+
+int main()
+{
+    long b = 1;
+    int socket;
+    int flags = setsockopt(socket, SOL_SOCKET, SO_NONBLOCK, &b, sizeof(b));
+}"
+          HAVE_SO_NONBLOCK)
+
+	  if(NOT HAVE_SO_NONBLOCK)
+	    # No non-blocking socket method found
+	    set(HAVE_DISABLED_NONBLOCKING 1)
+	  endif()
+	endif()
+      endif()
+    endif()
+  endif()
+endmacro()

cmake/CopyRuntimeDependencies.cmake

@@ -0,0 +1,72 @@
+# Copyright (c) 2014 Alexander Lamaison <alexander.lamaison@gmail.com>
+#
+# Redistribution and use in source and binary forms,
+# with or without modification, are permitted provided
+# that the following conditions are met:
+#
+#   Redistributions of source code must retain the above
+#   copyright notice, this list of conditions and the
+#   following disclaimer.
+#
+#   Redistributions in binary form must reproduce the above
+#   copyright notice, this list of conditions and the following
+#   disclaimer in the documentation and/or other materials
+#   provided with the distribution.
+#
+#   Neither the name of the copyright holder nor the names
+#   of any other contributors may be used to endorse or
+#   promote products derived from this software without
+#   specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+# CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+# INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+# OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+# CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+# SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+# NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
+# USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
+# OF SUCH DAMAGE.
+
+include(CMakeParseArguments)
+
+function(ADD_TARGET_TO_COPY_DEPENDENCIES)
+  set(options)
+  set(oneValueArgs TARGET)
+  set(multiValueArgs DEPENDENCIES BEFORE_TARGETS)
+  cmake_parse_arguments(COPY
+    "${options}" "${oneValueArgs}" "${multiValueArgs}" ${ARGN})
+
+  if(NOT COPY_DEPENDENCIES)
+    return()
+  endif()
+
+  # Using a custom target to drive custom commands stops multiple
+  # parallel builds trying to kick off the commands at the same time
+  add_custom_target(${COPY_TARGET})
+
+  foreach(target ${COPY_BEFORE_TARGETS})
+    add_dependencies(${target} ${COPY_TARGET})
+  endforeach()
+
+  foreach(dependency ${COPY_DEPENDENCIES})
+
+    add_custom_command(
+      TARGET ${COPY_TARGET}
+      DEPENDS ${dependency}
+      # Make directory first otherwise file is copied in place of
+      # directory instead of into it
+      COMMAND ${CMAKE_COMMAND}
+      ARGS -E make_directory ${CMAKE_CURRENT_BINARY_DIR}/${CMAKE_CFG_INTDIR}
+      COMMAND ${CMAKE_COMMAND}
+      ARGS -E copy ${dependency} ${CMAKE_CURRENT_BINARY_DIR}/${CMAKE_CFG_INTDIR}
+      VERBATIM)
+
+  endforeach()
+
+endfunction()

cmake/FindLibgcrypt.cmake

@@ -0,0 +1,53 @@
+# Copyright (c) 2014 Alexander Lamaison <alexander.lamaison@gmail.com>
+#
+# Redistribution and use in source and binary forms,
+# with or without modification, are permitted provided
+# that the following conditions are met:
+#
+#   Redistributions of source code must retain the above
+#   copyright notice, this list of conditions and the
+#   following disclaimer.
+#
+#   Redistributions in binary form must reproduce the above
+#   copyright notice, this list of conditions and the following
+#   disclaimer in the documentation and/or other materials
+#   provided with the distribution.
+#
+#   Neither the name of the copyright holder nor the names
+#   of any other contributors may be used to endorse or
+#   promote products derived from this software without
+#   specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+# CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+# INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+# OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+# CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+# SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+# NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
+# USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
+# OF SUCH DAMAGE.
+
+# - Try to find Libgcrypt
+# This will define all or none of:
+#  LIBGCRYPT_FOUND - if Libgcrypt headers and library was found
+#  LIBGCRYPT_INCLUDE_DIRS - The Libgcrypt include directories
+#  LIBGCRYPT_LIBRARIES - The libraries needed to use Libgcrypt
+
+find_path(LIBGCRYPT_INCLUDE_DIR gcrypt.h)
+
+find_library(LIBGCRYPT_LIBRARY NAMES gcrypt libgcrypt)
+
+set(LIBGCRYPT_LIBRARIES ${LIBGCRYPT_LIBRARY})
+set(LIBGCRYPT_INCLUDE_DIRS ${LIBGCRYPT_INCLUDE_DIR})
+
+include(FindPackageHandleStandardArgs)
+find_package_handle_standard_args(Libgcrypt DEFAULT_MSG
+                                  LIBGCRYPT_LIBRARY LIBGCRYPT_INCLUDE_DIR)
+
+mark_as_advanced(LIBGCRYPT_INCLUDE_DIR LIBGCRYPT_LIBRARY)

cmake/FindmbedTLS.cmake

@@ -0,0 +1,64 @@
+# - Try to find mbedTLS
+# Once done this will define
+#
+# Read-Only variables
+#  MBEDTLS_FOUND - system has mbedTLS
+#  MBEDTLS_INCLUDE_DIR - the mbedTLS include directory
+#  MBEDTLS_LIBRARY_DIR - the mbedTLS library directory
+#  MBEDTLS_LIBRARIES - Link these to use mbedTLS
+#  MBEDTLS_LIBRARY - path to mbedTLS library
+#  MBEDX509_LIBRARY - path to mbedTLS X.509 library
+#  MBEDCRYPTO_LIBRARY - path to mbedTLS Crypto library
+
+FIND_PATH(MBEDTLS_INCLUDE_DIR mbedtls/version.h)
+
+IF(MBEDTLS_INCLUDE_DIR AND MBEDTLS_LIBRARIES)
+    # Already in cache, be silent
+    SET(MBEDTLS_FIND_QUIETLY TRUE)
+ENDIF()
+
+FIND_LIBRARY(MBEDTLS_LIBRARY NAMES mbedtls libmbedtls libmbedx509)
+FIND_LIBRARY(MBEDX509_LIBRARY NAMES mbedx509 libmbedx509)
+FIND_LIBRARY(MBEDCRYPTO_LIBRARY NAMES mbedcrypto libmbedcrypto)
+
+IF(MBEDTLS_INCLUDE_DIR AND MBEDTLS_LIBRARY AND MBEDX509_LIBRARY AND MBEDCRYPTO_LIBRARY)
+     SET(MBEDTLS_FOUND TRUE)
+ENDIF()
+
+IF(MBEDTLS_FOUND)
+    # split mbedTLS into -L and -l linker options, so we can set them for pkg-config
+    GET_FILENAME_COMPONENT(MBEDTLS_LIBRARY_DIR ${MBEDTLS_LIBRARY} PATH)
+    GET_FILENAME_COMPONENT(MBEDTLS_LIBRARY_FILE ${MBEDTLS_LIBRARY} NAME_WE)
+    GET_FILENAME_COMPONENT(MBEDX509_LIBRARY_FILE ${MBEDX509_LIBRARY} NAME_WE)
+    GET_FILENAME_COMPONENT(MBEDCRYPTO_LIBRARY_FILE ${MBEDCRYPTO_LIBRARY} NAME_WE)
+    STRING(REGEX REPLACE "^lib" "" MBEDTLS_LIBRARY_FILE ${MBEDTLS_LIBRARY_FILE})
+    STRING(REGEX REPLACE "^lib" "" MBEDX509_LIBRARY_FILE ${MBEDX509_LIBRARY_FILE})
+    STRING(REGEX REPLACE "^lib" "" MBEDCRYPTO_LIBRARY_FILE ${MBEDCRYPTO_LIBRARY_FILE})
+    SET(MBEDTLS_LIBRARIES "-L${MBEDTLS_LIBRARY_DIR} -l${MBEDTLS_LIBRARY_FILE} -l${MBEDX509_LIBRARY_FILE} -l${MBEDCRYPTO_LIBRARY_FILE}")
+
+    IF(NOT MBEDTLS_FIND_QUIETLY)
+        MESSAGE(STATUS "Found mbedTLS:")
+        FILE(READ ${MBEDTLS_INCLUDE_DIR}/mbedtls/version.h MBEDTLSCONTENT)
+        STRING(REGEX MATCH "MBEDTLS_VERSION_STRING +\"[0-9|.]+\"" MBEDTLSMATCH ${MBEDTLSCONTENT})
+        IF (MBEDTLSMATCH)
+            STRING(REGEX REPLACE "MBEDTLS_VERSION_STRING +\"([0-9|.]+)\"" "\\1" MBEDTLS_VERSION ${MBEDTLSMATCH})
+            MESSAGE(STATUS "  version ${MBEDTLS_VERSION}")
+        ENDIF(MBEDTLSMATCH)
+        MESSAGE(STATUS "  TLS: ${MBEDTLS_LIBRARY}")
+        MESSAGE(STATUS "  X509: ${MBEDX509_LIBRARY}")
+        MESSAGE(STATUS "  Crypto: ${MBEDCRYPTO_LIBRARY}")
+    ENDIF(NOT MBEDTLS_FIND_QUIETLY)
+ELSE(MBEDTLS_FOUND)
+    IF(MBEDTLS_FIND_REQUIRED)
+        MESSAGE(FATAL_ERROR "Could not find mbedTLS")
+    ENDIF(MBEDTLS_FIND_REQUIRED)
+ENDIF(MBEDTLS_FOUND)
+
+MARK_AS_ADVANCED(
+    MBEDTLS_INCLUDE_DIR
+    MBEDTLS_LIBRARY_DIR
+    MBEDTLS_LIBRARIES
+    MBEDTLS_LIBRARY
+    MBEDX509_LIBRARY
+    MBEDCRYPTO_LIBRARY
+)

cmake/SocketLibraries.cmake

@@ -0,0 +1,64 @@
+# Copyright (c) 2014 Alexander Lamaison <alexander.lamaison@gmail.com>
+#
+# Redistribution and use in source and binary forms,
+# with or without modification, are permitted provided
+# that the following conditions are met:
+#
+#   Redistributions of source code must retain the above
+#   copyright notice, this list of conditions and the
+#   following disclaimer.
+#
+#   Redistributions in binary form must reproduce the above
+#   copyright notice, this list of conditions and the following
+#   disclaimer in the documentation and/or other materials
+#   provided with the distribution.
+#
+#   Neither the name of the copyright holder nor the names
+#   of any other contributors may be used to endorse or
+#   promote products derived from this software without
+#   specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+# CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+# INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+# OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+# CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+# SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+# NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
+# USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
+# OF SUCH DAMAGE.
+
+# Some systems have their socket functions in a library.
+# (Solaris -lsocket/-lnsl, Windows -lws2_32).  This macro appends those
+# libraries to the given list
+macro(append_needed_socket_libraries LIBRARIES_LIST)
+  if(CMAKE_SYSTEM_NAME STREQUAL "Windows" AND CMAKE_SIZEOF_VOID_P EQUAL 4)
+    # x86 Windows uses STDCALL for these functions, so their names are mangled,
+    # meaning the platform checks don't work. Hardcoding these until we get
+    # a better solution.
+    set(HAVE_SOCKET 1)
+    set(HAVE_SELECT 1)
+    set(HAVE_INET_ADDR 1)
+    set(NEED_LIB_WS2_32 1)
+  else()
+    check_function_exists_may_need_library(socket HAVE_SOCKET socket ws2_32)
+    check_function_exists_may_need_library(select HAVE_SELECT ws2_32)
+    check_function_exists_may_need_library(inet_addr HAVE_INET_ADDR nsl ws2_32)
+  endif()
+
+  if(NEED_LIB_SOCKET)
+    list(APPEND ${LIBRARIES_LIST} socket)
+  endif()
+  if(NEED_LIB_NSL)
+    list(APPEND ${LIBRARIES_LIST} nsl)
+  endif()
+  if(NEED_LIB_WS2_32)
+    list(APPEND ${LIBRARIES_LIST} ws2_32)
+  endif()
+
+endmacro()

cmake/Toolchain-Linux-32.cmake

@@ -0,0 +1,42 @@
+# Copyright (c) 2014 Alexander Lamaison <alexander.lamaison@gmail.com>
+#
+# Redistribution and use in source and binary forms,
+# with or without modification, are permitted provided
+# that the following conditions are met:
+#
+#   Redistributions of source code must retain the above
+#   copyright notice, this list of conditions and the
+#   following disclaimer.
+#
+#   Redistributions in binary form must reproduce the above
+#   copyright notice, this list of conditions and the following
+#   disclaimer in the documentation and/or other materials
+#   provided with the distribution.
+#
+#   Neither the name of the copyright holder nor the names
+#   of any other contributors may be used to endorse or
+#   promote products derived from this software without
+#   specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+# CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+# INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+# OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+# CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+# SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+# NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
+# USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
+# OF SUCH DAMAGE.
+
+# Cross-compile 32-bit binary on 64-bit linux host
+set(CMAKE_SYSTEM_NAME Linux)
+set(CMAKE_SYSTEM_VERSION 1)
+set(CMAKE_SYSTEM_PROCESSOR "i386")
+
+set(CMAKE_CXX_COMPILER_ARG1 "-m32")
+set(CMAKE_C_COMPILER_ARG1 "-m32")

cmake/max_warnings.cmake

@@ -0,0 +1,23 @@
+if(MSVC)
+  # Use the highest warning level for visual studio.
+  if(CMAKE_CXX_FLAGS MATCHES "/W[0-4]")
+    string(REGEX REPLACE "/W[0-4]" "/W4" CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS}")
+  else()
+    set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} /W4")
+  endif()
+  if(CMAKE_C_FLAGS MATCHES "/W[0-4]")
+    string(REGEX REPLACE "/W[0-4]" "/W4" CMAKE_C_FLAGS "${CMAKE_C_FLAGS}")
+  else()
+    set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} /W4")
+  endif()
+
+  # Disable broken warnings
+  add_definitions(-D_CRT_SECURE_NO_WARNINGS -D_CRT_NONSTDC_NO_DEPRECATE)
+elseif(CMAKE_COMPILER_IS_GNUCC OR CMAKE_COMPILER_IS_GNUCXX)
+  if(NOT CMAKE_CXX_FLAGS MATCHES "-Wall")
+    set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -Wall")
+  endif()
+  if(NOT CMAKE_C_FLAGS MATCHES "-Wall")
+    set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -Wall")
+  endif()
+endif()

compile

@@ -0,0 +1,348 @@
+#! /bin/sh
+# Wrapper for compilers which do not understand '-c -o'.
+
+scriptversion=2018-03-07.03; # UTC
+
+# Copyright (C) 1999-2018 Free Software Foundation, Inc.
+# Written by Tom Tromey <tromey@cygnus.com>.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <https://www.gnu.org/licenses/>.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# This file is maintained in Automake, please report
+# bugs to <bug-automake@gnu.org> or send patches to
+# <automake-patches@gnu.org>.
+
+nl='
+'
+
+# We need space, tab and new line, in precisely that order.  Quoting is
+# there to prevent tools from complaining about whitespace usage.
+IFS=" ""	$nl"
+
+file_conv=
+
+# func_file_conv build_file lazy
+# Convert a $build file to $host form and store it in $file
+# Currently only supports Windows hosts. If the determined conversion
+# type is listed in (the comma separated) LAZY, no conversion will
+# take place.
+func_file_conv ()
+{
+  file=$1
+  case $file in
+    / | /[!/]*) # absolute file, and not a UNC file
+      if test -z "$file_conv"; then
+	# lazily determine how to convert abs files
+	case `uname -s` in
+	  MINGW*)
+	    file_conv=mingw
+	    ;;
+	  CYGWIN*)
+	    file_conv=cygwin
+	    ;;
+	  *)
+	    file_conv=wine
+	    ;;
+	esac
+      fi
+      case $file_conv/,$2, in
+	*,$file_conv,*)
+	  ;;
+	mingw/*)
+	  file=`cmd //C echo "$file " | sed -e 's/"\(.*\) " *$/\1/'`
+	  ;;
+	cygwin/*)
+	  file=`cygpath -m "$file" || echo "$file"`
+	  ;;
+	wine/*)
+	  file=`winepath -w "$file" || echo "$file"`
+	  ;;
+      esac
+      ;;
+  esac
+}
+
+# func_cl_dashL linkdir
+# Make cl look for libraries in LINKDIR
+func_cl_dashL ()
+{
+  func_file_conv "$1"
+  if test -z "$lib_path"; then
+    lib_path=$file
+  else
+    lib_path="$lib_path;$file"
+  fi
+  linker_opts="$linker_opts -LIBPATH:$file"
+}
+
+# func_cl_dashl library
+# Do a library search-path lookup for cl
+func_cl_dashl ()
+{
+  lib=$1
+  found=no
+  save_IFS=$IFS
+  IFS=';'
+  for dir in $lib_path $LIB
+  do
+    IFS=$save_IFS
+    if $shared && test -f "$dir/$lib.dll.lib"; then
+      found=yes
+      lib=$dir/$lib.dll.lib
+      break
+    fi
+    if test -f "$dir/$lib.lib"; then
+      found=yes
+      lib=$dir/$lib.lib
+      break
+    fi
+    if test -f "$dir/lib$lib.a"; then
+      found=yes
+      lib=$dir/lib$lib.a
+      break
+    fi
+  done
+  IFS=$save_IFS
+
+  if test "$found" != yes; then
+    lib=$lib.lib
+  fi
+}
+
+# func_cl_wrapper cl arg...
+# Adjust compile command to suit cl
+func_cl_wrapper ()
+{
+  # Assume a capable shell
+  lib_path=
+  shared=:
+  linker_opts=
+  for arg
+  do
+    if test -n "$eat"; then
+      eat=
+    else
+      case $1 in
+	-o)
+	  # configure might choose to run compile as 'compile cc -o foo foo.c'.
+	  eat=1
+	  case $2 in
+	    *.o | *.[oO][bB][jJ])
+	      func_file_conv "$2"
+	      set x "$@" -Fo"$file"
+	      shift
+	      ;;
+	    *)
+	      func_file_conv "$2"
+	      set x "$@" -Fe"$file"
+	      shift
+	      ;;
+	  esac
+	  ;;
+	-I)
+	  eat=1
+	  func_file_conv "$2" mingw
+	  set x "$@" -I"$file"
+	  shift
+	  ;;
+	-I*)
+	  func_file_conv "${1#-I}" mingw
+	  set x "$@" -I"$file"
+	  shift
+	  ;;
+	-l)
+	  eat=1
+	  func_cl_dashl "$2"
+	  set x "$@" "$lib"
+	  shift
+	  ;;
+	-l*)
+	  func_cl_dashl "${1#-l}"
+	  set x "$@" "$lib"
+	  shift
+	  ;;
+	-L)
+	  eat=1
+	  func_cl_dashL "$2"
+	  ;;
+	-L*)
+	  func_cl_dashL "${1#-L}"
+	  ;;
+	-static)
+	  shared=false
+	  ;;
+	-Wl,*)
+	  arg=${1#-Wl,}
+	  save_ifs="$IFS"; IFS=','
+	  for flag in $arg; do
+	    IFS="$save_ifs"
+	    linker_opts="$linker_opts $flag"
+	  done
+	  IFS="$save_ifs"
+	  ;;
+	-Xlinker)
+	  eat=1
+	  linker_opts="$linker_opts $2"
+	  ;;
+	-*)
+	  set x "$@" "$1"
+	  shift
+	  ;;
+	*.cc | *.CC | *.cxx | *.CXX | *.[cC]++)
+	  func_file_conv "$1"
+	  set x "$@" -Tp"$file"
+	  shift
+	  ;;
+	*.c | *.cpp | *.CPP | *.lib | *.LIB | *.Lib | *.OBJ | *.obj | *.[oO])
+	  func_file_conv "$1" mingw
+	  set x "$@" "$file"
+	  shift
+	  ;;
+	*)
+	  set x "$@" "$1"
+	  shift
+	  ;;
+      esac
+    fi
+    shift
+  done
+  if test -n "$linker_opts"; then
+    linker_opts="-link$linker_opts"
+  fi
+  exec "$@" $linker_opts
+  exit 1
+}
+
+eat=
+
+case $1 in
+  '')
+     echo "$0: No command.  Try '$0 --help' for more information." 1>&2
+     exit 1;
+     ;;
+  -h | --h*)
+    cat <<\EOF
+Usage: compile [--help] [--version] PROGRAM [ARGS]
+
+Wrapper for compilers which do not understand '-c -o'.
+Remove '-o dest.o' from ARGS, run PROGRAM with the remaining
+arguments, and rename the output as expected.
+
+If you are trying to build a whole package this is not the
+right script to run: please start by reading the file 'INSTALL'.
+
+Report bugs to <bug-automake@gnu.org>.
+EOF
+    exit $?
+    ;;
+  -v | --v*)
+    echo "compile $scriptversion"
+    exit $?
+    ;;
+  cl | *[/\\]cl | cl.exe | *[/\\]cl.exe | \
+  icl | *[/\\]icl | icl.exe | *[/\\]icl.exe )
+    func_cl_wrapper "$@"      # Doesn't return...
+    ;;
+esac
+
+ofile=
+cfile=
+
+for arg
+do
+  if test -n "$eat"; then
+    eat=
+  else
+    case $1 in
+      -o)
+	# configure might choose to run compile as 'compile cc -o foo foo.c'.
+	# So we strip '-o arg' only if arg is an object.
+	eat=1
+	case $2 in
+	  *.o | *.obj)
+	    ofile=$2
+	    ;;
+	  *)
+	    set x "$@" -o "$2"
+	    shift
+	    ;;
+	esac
+	;;
+      *.c)
+	cfile=$1
+	set x "$@" "$1"
+	shift
+	;;
+      *)
+	set x "$@" "$1"
+	shift
+	;;
+    esac
+  fi
+  shift
+done
+
+if test -z "$ofile" || test -z "$cfile"; then
+  # If no '-o' option was seen then we might have been invoked from a
+  # pattern rule where we don't need one.  That is ok -- this is a
+  # normal compilation that the losing compiler can handle.  If no
+  # '.c' file was seen then we are probably linking.  That is also
+  # ok.
+  exec "$@"
+fi
+
+# Name of file we expect compiler to create.
+cofile=`echo "$cfile" | sed 's|^.*[\\/]||; s|^[a-zA-Z]:||; s/\.c$/.o/'`
+
+# Create the lock directory.
+# Note: use '[/\\:.-]' here to ensure that we don't use the same name
+# that we are using for the .o file.  Also, base the name on the expected
+# object file name, since that is what matters with a parallel build.
+lockdir=`echo "$cofile" | sed -e 's|[/\\:.-]|_|g'`.d
+while true; do
+  if mkdir "$lockdir" >/dev/null 2>&1; then
+    break
+  fi
+  sleep 1
+done
+# FIXME: race condition here if user kills between mkdir and trap.
+trap "rmdir '$lockdir'; exit 1" 1 2 15
+
+# Run the compile.
+"$@"
+ret=$?
+
+if test -f "$cofile"; then
+  test "$cofile" = "$ofile" || mv "$cofile" "$ofile"
+elif test -f "${cofile}bj"; then
+  test "${cofile}bj" = "$ofile" || mv "${cofile}bj" "$ofile"
+fi
+
+rmdir "$lockdir"
+exit $ret
+
+# Local Variables:
+# mode: shell-script
+# sh-indentation: 2
+# eval: (add-hook 'before-save-hook 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-time-zone: "UTC0"
+# time-stamp-end: "; # UTC"
+# End:

configure.ac

@@ -2,8 +2,9 @@
 AC_INIT(libssh2, [-], libssh2-devel@cool.haxx.se)
 AC_CONFIG_MACRO_DIR([m4])
 AC_CONFIG_SRCDIR([src])
-AM_CONFIG_HEADER([src/libssh2_config.h example/libssh2_config.h])
+AC_CONFIG_HEADERS([src/libssh2_config.h example/libssh2_config.h])
 AM_MAINTAINER_MODE
+m4_ifdef([AM_SILENT_RULES], [AM_SILENT_RULES([yes])])
 
 dnl SED is needed by some of the tools
 AC_PATH_PROG( SED, sed, sed-was-not-found-by-configure,
@@ -82,60 +83,84 @@ AC_C_BIGENDIAN
 dnl check for how to do large files
 AC_SYS_LARGEFILE
 
+found_crypto=none
+
 # Configure parameters
-AC_ARG_WITH(libgcrypt,
-  AC_HELP_STRING([--with-libgcrypt],[Use Libgcrypt for crypto]),
-  use_libgcrypt=$withval,use_libgcrypt=auto)
 AC_ARG_WITH(openssl,
   AC_HELP_STRING([--with-openssl],[Use OpenSSL for crypto]),
   use_openssl=$withval,use_openssl=auto)
+AC_ARG_WITH(libgcrypt,
+  AC_HELP_STRING([--with-libgcrypt],[Use libgcrypt for crypto]),
+  [ use_libgcrypt=$withval
+    LIBSSH2_CHECKFOR_GCRYPT
+  ], use_libgcrypt=auto)
+AC_ARG_WITH(wincng,
+  AC_HELP_STRING([--with-wincng],[Use Windows CNG for crypto]),
+  [ use_wincng=$withval
+    LIBSSH2_CHECKFOR_WINCNG
+  ] ,use_wincng=auto)
+AC_ARG_WITH([mbedtls],
+  AC_HELP_STRING([--with-mbedtls],[Use mbedTLS for crypto]),
+  [ use_mbedtls=$withval
+    LIBSSH2_CHECKFOR_MBEDTLS
+  ], use_mbedtls=auto
+)
 AC_ARG_WITH(libz,
-  AC_HELP_STRING([--with-libz],[Use Libz for compression]),
+  AC_HELP_STRING([--with-libz],[Use zlib for compression]),
   use_libz=$withval,use_libz=auto)
 
-# Look for OpenSSL (default)
-if test "$use_openssl" != "no" && test "$use_libgcrypt" != "yes"; then
+support_clear_memory=no
+
+# Look for OpenSSL
+if test "$found_crypto" = "none" && test "$use_openssl" != "no"; then
   AC_LIB_HAVE_LINKFLAGS([ssl], [crypto], [#include <openssl/ssl.h>])
-  LIBSREQUIRED=libssl,libcrypto
 fi
-
-# Look for libgcrypt
-if test "$ac_cv_libssl" != "yes" && test "$use_libgcrypt" != "no"; then
-  AC_LIB_HAVE_LINKFLAGS([gcrypt], [], [#include <gcrypt.h>])
-  LIBSREQUIRED=libgcrypt
-fi
-
-AC_SUBST(LIBSREQUIRED)
-
-if test "$ac_cv_libssl" != "yes" && test "$ac_cv_libgcrypt" != "yes"; then
-  AC_MSG_ERROR([cannot find OpenSSL or Libgcrypt,
-try --with-libssl-prefix=PATH or --with-libgcrypt-prefix=PATH])
-fi
-
-if test "$ac_cv_libgcrypt" = "yes"; then
-  AC_DEFINE(LIBSSH2_LIBGCRYPT, 1, [Use libgcrypt])
-fi
-AM_CONDITIONAL(LIBGCRYPT, test "$ac_cv_libgcrypt" = "yes")
-
-# Not all OpenSSL have AES-CTR functions.
 if test "$ac_cv_libssl" = "yes"; then
-  save_LDFLAGS="$LDFLAGS"
-  LDFLAGS="$LDFLAGS $LIBSSL"
+  AC_DEFINE(LIBSSH2_OPENSSL, 1, [Use OpenSSL])
+  LIBSREQUIRED=libssl,libcrypto
+
+  # Not all OpenSSL have AES-CTR functions.
+  save_LIBS="$LIBS"
+  LIBS="$LIBS $LIBSSL"
   AC_CHECK_FUNCS(EVP_aes_128_ctr)
-  LDFLAGS="$save_LDFLAGS"
+  LIBS="$save_LIBS"
+
+  found_crypto="OpenSSL (AES-CTR: ${ac_cv_func_EVP_aes_128_ctr:-N/A})"
+fi
+
+AM_CONDITIONAL(OPENSSL, test "$ac_cv_libssl" = "yes")
+AM_CONDITIONAL(WINCNG, test "$ac_cv_libbcrypt" = "yes")
+AM_CONDITIONAL(LIBGCRYPT, test "$ac_cv_libgcrypt" = "yes")
+AM_CONDITIONAL(MBEDTLS, test "$ac_cv_libmbedtls" = "yes")
+AM_CONDITIONAL(OS400QC3, false)
+
+# Check if crypto library was found
+if test "$found_crypto" = "none"; then
+  AC_MSG_ERROR([No crypto library found!
+Try --with-libssl-prefix=PATH
+ or --with-libgcrypt-prefix=PATH
+ or --with-libmbedtls-prefix=PATH
+ or --with-wincng on Windows\
+])
 fi
 
 # Look for Libz
 if test "$use_libz" != "no"; then
   AC_LIB_HAVE_LINKFLAGS([z], [], [#include <zlib.h>])
   if test "$ac_cv_libz" != yes; then
-    AC_MSG_NOTICE([Cannot find libz, disabling compression])
+    AC_MSG_NOTICE([Cannot find zlib, disabling compression])
     AC_MSG_NOTICE([Try --with-libz-prefix=PATH if you know you have it])
   else
     AC_DEFINE(LIBSSH2_HAVE_ZLIB, 1, [Compile in zlib support])
+    if test "${LIBSREQUIRED}" != ""; then
+      LIBSREQUIRED="${LIBSREQUIRED},"
+    fi
+    LIBSREQUIRED="${LIBSREQUIRED}zlib"
   fi
 fi
 
+AC_SUBST(LIBSREQUIRED)
+
 #
 # Optional Settings
 #
@@ -154,6 +179,30 @@ if test "$GEX_NEW" != "no"; then
   AC_DEFINE(LIBSSH2_DH_GEX_NEW, 1, [Enable newer diffie-hellman-group-exchange-sha1 syntax])
 fi
 
+AC_ARG_ENABLE(clear-memory,
+  AC_HELP_STRING([--disable-clear-memory],[Disable clearing of memory before being freed]),
+  [CLEAR_MEMORY=$enableval])
+if test "$CLEAR_MEMORY" != "no"; then
+  if test "$support_clear_memory" = "yes"; then
+    AC_DEFINE(LIBSSH2_CLEAR_MEMORY, 1, [Enable clearing of memory before being freed])
+    enable_clear_memory=yes
+  else
+    if test "$CLEAR_MEMORY" = "yes"; then
+      AC_MSG_ERROR([secure clearing/zeroing of memory is not supported by the selected crypto backend])
+    else
+      AC_MSG_WARN([secure clearing/zeroing of memory is not supported by the selected crypto backend])
+    fi
+    enable_clear_memory=unsupported
+  fi
+else
+  if test "$support_clear_memory" = "yes"; then
+    enable_clear_memory=no
+  else
+    AC_MSG_WARN([secure clearing/zeroing of memory is not supported by the selected crypto backend])
+    enable_clear_memory=unsupported
+  fi
+fi
+
 dnl ************************************************************
 dnl option to switch on compiler debug options
 dnl
@@ -318,9 +367,10 @@ AC_MSG_NOTICE([summary of build options:
   Compiler:         ${CC}
   Compiler flags:   ${CFLAGS}
   Library types:    Shared=${enable_shared}, Static=${enable_static}
-  Crypto library:   openssl: ${ac_cv_libssl:-no} (AES-CTR: ${ac_cv_func_EVP_aes_128_ctr:-N/A}) libgcrypt: ${ac_cv_libgcrypt:-no}
+  Crypto library:   ${found_crypto}
+  Clear memory:     $enable_clear_memory
   Debug build:      $enable_debug
   Build examples:   $build_examples
   Path to sshd:     $ac_cv_path_SSHD (only for self-tests)
-  libz compression: $ac_cv_libz
+  zlib compression: $ac_cv_libz
 ])

depcomp

@@ -1,9 +1,9 @@
 #! /bin/sh
 # depcomp - compile a program generating dependencies as side-effects
 
-scriptversion=2005-07-09.11
+scriptversion=2018-03-07.03; # UTC
 
-# Copyright (C) 1999, 2000, 2003, 2004, 2005 Free Software Foundation, Inc.
+# Copyright (C) 1999-2018 Free Software Foundation, Inc.
 
 # This program is free software; you can redistribute it and/or modify
 # it under the terms of the GNU General Public License as published by
@@ -16,9 +16,7 @@ scriptversion=2005-07-09.11
 # GNU General Public License for more details.
 
 # You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
-# 02110-1301, USA.
+# along with this program.  If not, see <https://www.gnu.org/licenses/>.
 
 # As a special exception to the GNU General Public License, if you
 # distribute this file as part of a program that contains a
@@ -29,9 +27,9 @@ scriptversion=2005-07-09.11
 
 case $1 in
   '')
-     echo "$0: No command.  Try \`$0 --help' for more information." 1>&2
-     exit 1;
-     ;;
+    echo "$0: No command.  Try '$0 --help' for more information." 1>&2
+    exit 1;
+    ;;
   -h | --h*)
     cat <<\EOF
 Usage: depcomp [--help] [--version] PROGRAM [ARGS]
@@ -41,11 +39,11 @@ as side-effects.
 
 Environment variables:
   depmode     Dependency tracking mode.
-  source      Source file read by `PROGRAMS ARGS'.
-  object      Object file output by `PROGRAMS ARGS'.
+  source      Source file read by 'PROGRAMS ARGS'.
+  object      Object file output by 'PROGRAMS ARGS'.
   DEPDIR      directory where to store dependencies.
   depfile     Dependency file to output.
-  tmpdepfile  Temporary file to use when outputing dependencies.
+  tmpdepfile  Temporary file to use when outputting dependencies.
   libtool     Whether libtool is used (yes/no).
 
 Report bugs to <bug-automake@gnu.org>.
@@ -58,6 +56,66 @@ EOF
     ;;
 esac
 
+# Get the directory component of the given path, and save it in the
+# global variables '$dir'.  Note that this directory component will
+# be either empty or ending with a '/' character.  This is deliberate.
+set_dir_from ()
+{
+  case $1 in
+    */*) dir=`echo "$1" | sed -e 's|/[^/]*$|/|'`;;
+      *) dir=;;
+  esac
+}
+
+# Get the suffix-stripped basename of the given path, and save it the
+# global variable '$base'.
+set_base_from ()
+{
+  base=`echo "$1" | sed -e 's|^.*/||' -e 's/\.[^.]*$//'`
+}
+
+# If no dependency file was actually created by the compiler invocation,
+# we still have to create a dummy depfile, to avoid errors with the
+# Makefile "include basename.Plo" scheme.
+make_dummy_depfile ()
+{
+  echo "#dummy" > "$depfile"
+}
+
+# Factor out some common post-processing of the generated depfile.
+# Requires the auxiliary global variable '$tmpdepfile' to be set.
+aix_post_process_depfile ()
+{
+  # If the compiler actually managed to produce a dependency file,
+  # post-process it.
+  if test -f "$tmpdepfile"; then
+    # Each line is of the form 'foo.o: dependency.h'.
+    # Do two passes, one to just change these to
+    #   $object: dependency.h
+    # and one to simply output
+    #   dependency.h:
+    # which is needed to avoid the deleted-header problem.
+    { sed -e "s,^.*\.[$lower]*:,$object:," < "$tmpdepfile"
+      sed -e "s,^.*\.[$lower]*:[$tab ]*,," -e 's,$,:,' < "$tmpdepfile"
+    } > "$depfile"
+    rm -f "$tmpdepfile"
+  else
+    make_dummy_depfile
+  fi
+}
+
+# A tabulation character.
+tab='	'
+# A newline character.
+nl='
+'
+# Character ranges might be problematic outside the C locale.
+# These definitions help.
+upper=ABCDEFGHIJKLMNOPQRSTUVWXYZ
+lower=abcdefghijklmnopqrstuvwxyz
+digits=0123456789
+alpha=${upper}${lower}
+
 if test -z "$depmode" || test -z "$source" || test -z "$object"; then
   echo "depcomp: Variables source, object and depmode must be set" 1>&2
   exit 1
@@ -70,6 +128,9 @@ tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`}
 
 rm -f "$tmpdepfile"
 
+# Avoid interferences from the environment.
+gccflag= dashmflag=
+
 # Some modes work just like other modes, but use different flags.  We
 # parameterize here, but still list the modes in the big case below,
 # to make depend.m4 easier to write.  Note that we *cannot* use a case
@@ -81,9 +142,32 @@ if test "$depmode" = hp; then
 fi
 
 if test "$depmode" = dashXmstdout; then
-   # This is just like dashmstdout with a different argument.
-   dashmflag=-xM
-   depmode=dashmstdout
+  # This is just like dashmstdout with a different argument.
+  dashmflag=-xM
+  depmode=dashmstdout
+fi
+
+cygpath_u="cygpath -u -f -"
+if test "$depmode" = msvcmsys; then
+  # This is just like msvisualcpp but w/o cygpath translation.
+  # Just convert the backslash-escaped backslashes to single forward
+  # slashes to satisfy depend.m4
+  cygpath_u='sed s,\\\\,/,g'
+  depmode=msvisualcpp
+fi
+
+if test "$depmode" = msvc7msys; then
+  # This is just like msvc7 but w/o cygpath translation.
+  # Just convert the backslash-escaped backslashes to single forward
+  # slashes to satisfy depend.m4
+  cygpath_u='sed s,\\\\,/,g'
+  depmode=msvc7
+fi
+
+if test "$depmode" = xlc; then
+  # IBM C/C++ Compilers xlc/xlC can output gcc-like dependency information.
+  gccflag=-qmakedep=gcc,-MF
+  depmode=gcc
 fi
 
 case "$depmode" in
@@ -91,10 +175,22 @@ gcc3)
 ## gcc 3 implements dependency tracking that does exactly what
 ## we want.  Yay!  Note: for some reason libtool 1.4 doesn't like
 ## it if -MD -MP comes after the -MF stuff.  Hmm.
-  "$@" -MT "$object" -MD -MP -MF "$tmpdepfile"
+## Unfortunately, FreeBSD c89 acceptance of flags depends upon
+## the command line argument order; so add the flags where they
+## appear in depend2.am.  Note that the slowdown incurred here
+## affects only configure: in makefiles, %FASTDEP% shortcuts this.
+  for arg
+  do
+    case $arg in
+    -c) set fnord "$@" -MT "$object" -MD -MP -MF "$tmpdepfile" "$arg" ;;
+    *)  set fnord "$@" "$arg" ;;
+    esac
+    shift # fnord
+    shift # $arg
+  done
+  "$@"
   stat=$?
-  if test $stat -eq 0; then :
-  else
+  if test $stat -ne 0; then
     rm -f "$tmpdepfile"
     exit $stat
   fi
@@ -102,13 +198,17 @@ gcc3)
   ;;
 
 gcc)
+## Note that this doesn't just cater to obsosete pre-3.x GCC compilers.
+## but also to in-use compilers like IMB xlc/xlC and the HP C compiler.
+## (see the conditional assignment to $gccflag above).
 ## There are various ways to get dependency output from gcc.  Here's
 ## why we pick this rather obscure method:
 ## - Don't want to use -MD because we'd like the dependencies to end
 ##   up in a subdir.  Having to rename by hand is ugly.
 ##   (We might end up doing this anyway to support other compilers.)
 ## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like
-##   -MM, not -M (despite what the docs say).
+##   -MM, not -M (despite what the docs say).  Also, it might not be
+##   supported by the other compilers which use the 'gcc' depmode.
 ## - Using -M directly means running the compiler twice (even worse
 ##   than renaming).
   if test -z "$gccflag"; then
@@ -116,31 +216,31 @@ gcc)
   fi
   "$@" -Wp,"$gccflag$tmpdepfile"
   stat=$?
-  if test $stat -eq 0; then :
-  else
+  if test $stat -ne 0; then
     rm -f "$tmpdepfile"
     exit $stat
   fi
   rm -f "$depfile"
   echo "$object : \\" > "$depfile"
-  alpha=ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz
-## The second -e expression handles DOS-style file names with drive letters.
+  # The second -e expression handles DOS-style file names with drive
+  # letters.
   sed -e 's/^[^:]*: / /' \
       -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile"
-## This next piece of magic avoids the `deleted header file' problem.
+## This next piece of magic avoids the "deleted header file" problem.
 ## The problem is that when a header file which appears in a .P file
 ## is deleted, the dependency causes make to die (because there is
 ## typically no way to rebuild the header).  We avoid this by adding
 ## dummy dependencies for each header file.  Too bad gcc doesn't do
 ## this for us directly.
-  tr ' ' '
-' < "$tmpdepfile" |
-## Some versions of gcc put a space before the `:'.  On the theory
+## Some versions of gcc put a space before the ':'.  On the theory
 ## that the space means something, we add a space to the output as
-## well.
+## well.  hp depmode also adds that space, but also prefixes the VPATH
+## to the object.  Take care to not repeat it in the output.
 ## Some versions of the HPUX 10.20 sed can't process this invocation
 ## correctly.  Breaking it into two sed invocations is a workaround.
-    sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
+  tr ' ' "$nl" < "$tmpdepfile" \
+    | sed -e 's/^\\$//' -e '/^$/d' -e "s|.*$object$||" -e '/:$/d' \
+    | sed -e 's/$/ :/' >> "$depfile"
   rm -f "$tmpdepfile"
   ;;
 
@@ -158,8 +258,7 @@ sgi)
     "$@" -MDupdate "$tmpdepfile"
   fi
   stat=$?
-  if test $stat -eq 0; then :
-  else
+  if test $stat -ne 0; then
     rm -f "$tmpdepfile"
     exit $stat
   fi
@@ -167,99 +266,156 @@ sgi)
 
   if test -f "$tmpdepfile"; then  # yes, the sourcefile depend on other files
     echo "$object : \\" > "$depfile"
-
     # Clip off the initial element (the dependent).  Don't try to be
     # clever and replace this with sed code, as IRIX sed won't handle
     # lines with more than a fixed number of characters (4096 in
     # IRIX 6.2 sed, 8192 in IRIX 6.5).  We also remove comment lines;
-    # the IRIX cc adds comments like `#:fec' to the end of the
+    # the IRIX cc adds comments like '#:fec' to the end of the
     # dependency line.
-    tr ' ' '
-' < "$tmpdepfile" \
-    | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \
-    tr '
-' ' ' >> $depfile
-    echo >> $depfile
-
+    tr ' ' "$nl" < "$tmpdepfile" \
+      | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' \
+      | tr "$nl" ' ' >> "$depfile"
+    echo >> "$depfile"
     # The second pass generates a dummy entry for each header file.
-    tr ' ' '
-' < "$tmpdepfile" \
-   | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \
-   >> $depfile
+    tr ' ' "$nl" < "$tmpdepfile" \
+      | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \
+      >> "$depfile"
   else
-    # The sourcefile does not contain any dependencies, so just
-    # store a dummy comment line, to avoid errors with the Makefile
-    # "include basename.Plo" scheme.
-    echo "#dummy" > "$depfile"
+    make_dummy_depfile
   fi
   rm -f "$tmpdepfile"
   ;;
 
+xlc)
+  # This case exists only to let depend.m4 do its work.  It works by
+  # looking at the text of this script.  This case will never be run,
+  # since it is checked for above.
+  exit 1
+  ;;
+
 aix)
   # The C for AIX Compiler uses -M and outputs the dependencies
   # in a .u file.  In older versions, this file always lives in the
-  # current directory.  Also, the AIX compiler puts `$object:' at the
+  # current directory.  Also, the AIX compiler puts '$object:' at the
   # start of each line; $object doesn't have directory information.
   # Version 6 uses the directory in both cases.
-  stripped=`echo "$object" | sed 's/\(.*\)\..*$/\1/'`
-  tmpdepfile="$stripped.u"
+  set_dir_from "$object"
+  set_base_from "$object"
   if test "$libtool" = yes; then
+    tmpdepfile1=$dir$base.u
+    tmpdepfile2=$base.u
+    tmpdepfile3=$dir.libs/$base.u
     "$@" -Wc,-M
   else
+    tmpdepfile1=$dir$base.u
+    tmpdepfile2=$dir$base.u
+    tmpdepfile3=$dir$base.u
     "$@" -M
   fi
   stat=$?
-
-  if test -f "$tmpdepfile"; then :
-  else
-    stripped=`echo "$stripped" | sed 's,^.*/,,'`
-    tmpdepfile="$stripped.u"
-  fi
-
-  if test $stat -eq 0; then :
-  else
-    rm -f "$tmpdepfile"
+  if test $stat -ne 0; then
+    rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
     exit $stat
   fi
 
-  if test -f "$tmpdepfile"; then
-    outname="$stripped.o"
-    # Each line is of the form `foo.o: dependent.h'.
-    # Do two passes, one to just change these to
-    # `$object: dependent.h' and one to simply `dependent.h:'.
-    sed -e "s,^$outname:,$object :," < "$tmpdepfile" > "$depfile"
-    sed -e "s,^$outname: \(.*\)$,\1:," < "$tmpdepfile" >> "$depfile"
-  else
-    # The sourcefile does not contain any dependencies, so just
-    # store a dummy comment line, to avoid errors with the Makefile
-    # "include basename.Plo" scheme.
-    echo "#dummy" > "$depfile"
+  for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
+  do
+    test -f "$tmpdepfile" && break
+  done
+  aix_post_process_depfile
+  ;;
+
+tcc)
+  # tcc (Tiny C Compiler) understand '-MD -MF file' since version 0.9.26
+  # FIXME: That version still under development at the moment of writing.
+  #        Make that this statement remains true also for stable, released
+  #        versions.
+  # It will wrap lines (doesn't matter whether long or short) with a
+  # trailing '\', as in:
+  #
+  #   foo.o : \
+  #    foo.c \
+  #    foo.h \
+  #
+  # It will put a trailing '\' even on the last line, and will use leading
+  # spaces rather than leading tabs (at least since its commit 0394caf7
+  # "Emit spaces for -MD").
+  "$@" -MD -MF "$tmpdepfile"
+  stat=$?
+  if test $stat -ne 0; then
+    rm -f "$tmpdepfile"
+    exit $stat
   fi
+  rm -f "$depfile"
+  # Each non-empty line is of the form 'foo.o : \' or ' dep.h \'.
+  # We have to change lines of the first kind to '$object: \'.
+  sed -e "s|.*:|$object :|" < "$tmpdepfile" > "$depfile"
+  # And for each line of the second kind, we have to emit a 'dep.h:'
+  # dummy dependency, to avoid the deleted-header problem.
+  sed -n -e 's|^  *\(.*\) *\\$|\1:|p' < "$tmpdepfile" >> "$depfile"
   rm -f "$tmpdepfile"
   ;;
 
-icc)
-  # Intel's C compiler understands `-MD -MF file'.  However on
-  #    icc -MD -MF foo.d -c -o sub/foo.o sub/foo.c
-  # ICC 7.0 will fill foo.d with something like
-  #    foo.o: sub/foo.c
-  #    foo.o: sub/foo.h
-  # which is wrong.  We want:
-  #    sub/foo.o: sub/foo.c
-  #    sub/foo.o: sub/foo.h
-  #    sub/foo.c:
-  #    sub/foo.h:
-  # ICC 7.1 will output
+## The order of this option in the case statement is important, since the
+## shell code in configure will try each of these formats in the order
+## listed in this file.  A plain '-MD' option would be understood by many
+## compilers, so we must ensure this comes after the gcc and icc options.
+pgcc)
+  # Portland's C compiler understands '-MD'.
+  # Will always output deps to 'file.d' where file is the root name of the
+  # source file under compilation, even if file resides in a subdirectory.
+  # The object file name does not affect the name of the '.d' file.
+  # pgcc 10.2 will output
   #    foo.o: sub/foo.c sub/foo.h
-  # and will wrap long lines using \ :
+  # and will wrap long lines using '\' :
   #    foo.o: sub/foo.c ... \
   #     sub/foo.h ... \
   #     ...
+  set_dir_from "$object"
+  # Use the source, not the object, to determine the base name, since
+  # that's sadly what pgcc will do too.
+  set_base_from "$source"
+  tmpdepfile=$base.d
 
-  "$@" -MD -MF "$tmpdepfile"
-  stat=$?
-  if test $stat -eq 0; then :
-  else
+  # For projects that build the same source file twice into different object
+  # files, the pgcc approach of using the *source* file root name can cause
+  # problems in parallel builds.  Use a locking strategy to avoid stomping on
+  # the same $tmpdepfile.
+  lockdir=$base.d-lock
+  trap "
+    echo '$0: caught signal, cleaning up...' >&2
+    rmdir '$lockdir'
+    exit 1
+  " 1 2 13 15
+  numtries=100
+  i=$numtries
+  while test $i -gt 0; do
+    # mkdir is a portable test-and-set.
+    if mkdir "$lockdir" 2>/dev/null; then
+      # This process acquired the lock.
+      "$@" -MD
+      stat=$?
+      # Release the lock.
+      rmdir "$lockdir"
+      break
+    else
+      # If the lock is being held by a different process, wait
+      # until the winning process is done or we timeout.
+      while test -d "$lockdir" && test $i -gt 0; do
+        sleep 1
+        i=`expr $i - 1`
+      done
+    fi
+    i=`expr $i - 1`
+  done
+  trap - 1 2 13 15
+  if test $i -le 0; then
+    echo "$0: failed to acquire lock after $numtries attempts" >&2
+    echo "$0: check lockdir '$lockdir'" >&2
+    exit 1
+  fi
+
+  if test $stat -ne 0; then
     rm -f "$tmpdepfile"
     exit $stat
   fi
@@ -271,68 +427,141 @@ icc)
   sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile"
   # Some versions of the HPUX 10.20 sed can't process this invocation
   # correctly.  Breaking it into two sed invocations is a workaround.
-  sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" |
-    sed -e 's/$/ :/' >> "$depfile"
+  sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" \
+    | sed -e 's/$/ :/' >> "$depfile"
   rm -f "$tmpdepfile"
   ;;
 
+hp2)
+  # The "hp" stanza above does not work with aCC (C++) and HP's ia64
+  # compilers, which have integrated preprocessors.  The correct option
+  # to use with these is +Maked; it writes dependencies to a file named
+  # 'foo.d', which lands next to the object file, wherever that
+  # happens to be.
+  # Much of this is similar to the tru64 case; see comments there.
+  set_dir_from  "$object"
+  set_base_from "$object"
+  if test "$libtool" = yes; then
+    tmpdepfile1=$dir$base.d
+    tmpdepfile2=$dir.libs/$base.d
+    "$@" -Wc,+Maked
+  else
+    tmpdepfile1=$dir$base.d
+    tmpdepfile2=$dir$base.d
+    "$@" +Maked
+  fi
+  stat=$?
+  if test $stat -ne 0; then
+     rm -f "$tmpdepfile1" "$tmpdepfile2"
+     exit $stat
+  fi
+
+  for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2"
+  do
+    test -f "$tmpdepfile" && break
+  done
+  if test -f "$tmpdepfile"; then
+    sed -e "s,^.*\.[$lower]*:,$object:," "$tmpdepfile" > "$depfile"
+    # Add 'dependent.h:' lines.
+    sed -ne '2,${
+               s/^ *//
+               s/ \\*$//
+               s/$/:/
+               p
+             }' "$tmpdepfile" >> "$depfile"
+  else
+    make_dummy_depfile
+  fi
+  rm -f "$tmpdepfile" "$tmpdepfile2"
+  ;;
+
 tru64)
-   # The Tru64 compiler uses -MD to generate dependencies as a side
-   # effect.  `cc -MD -o foo.o ...' puts the dependencies into `foo.o.d'.
-   # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put
-   # dependencies in `foo.d' instead, so we check for that too.
-   # Subdirectories are respected.
-   dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
-   test "x$dir" = "x$object" && dir=
-   base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
+  # The Tru64 compiler uses -MD to generate dependencies as a side
+  # effect.  'cc -MD -o foo.o ...' puts the dependencies into 'foo.o.d'.
+  # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put
+  # dependencies in 'foo.d' instead, so we check for that too.
+  # Subdirectories are respected.
+  set_dir_from  "$object"
+  set_base_from "$object"
 
-   if test "$libtool" = yes; then
-      # With Tru64 cc, shared objects can also be used to make a
-      # static library.  This mecanism is used in libtool 1.4 series to
-      # handle both shared and static libraries in a single compilation.
-      # With libtool 1.4, dependencies were output in $dir.libs/$base.lo.d.
-      #
-      # With libtool 1.5 this exception was removed, and libtool now
-      # generates 2 separate objects for the 2 libraries.  These two
-      # compilations output dependencies in in $dir.libs/$base.o.d and
-      # in $dir$base.o.d.  We have to check for both files, because
-      # one of the two compilations can be disabled.  We should prefer
-      # $dir$base.o.d over $dir.libs/$base.o.d because the latter is
-      # automatically cleaned when .libs/ is deleted, while ignoring
-      # the former would cause a distcleancheck panic.
-      tmpdepfile1=$dir.libs/$base.lo.d   # libtool 1.4
-      tmpdepfile2=$dir$base.o.d          # libtool 1.5
-      tmpdepfile3=$dir.libs/$base.o.d    # libtool 1.5
-      tmpdepfile4=$dir.libs/$base.d      # Compaq CCC V6.2-504
-      "$@" -Wc,-MD
-   else
-      tmpdepfile1=$dir$base.o.d
-      tmpdepfile2=$dir$base.d
-      tmpdepfile3=$dir$base.d
-      tmpdepfile4=$dir$base.d
-      "$@" -MD
-   fi
+  if test "$libtool" = yes; then
+    # Libtool generates 2 separate objects for the 2 libraries.  These
+    # two compilations output dependencies in $dir.libs/$base.o.d and
+    # in $dir$base.o.d.  We have to check for both files, because
+    # one of the two compilations can be disabled.  We should prefer
+    # $dir$base.o.d over $dir.libs/$base.o.d because the latter is
+    # automatically cleaned when .libs/ is deleted, while ignoring
+    # the former would cause a distcleancheck panic.
+    tmpdepfile1=$dir$base.o.d          # libtool 1.5
+    tmpdepfile2=$dir.libs/$base.o.d    # Likewise.
+    tmpdepfile3=$dir.libs/$base.d      # Compaq CCC V6.2-504
+    "$@" -Wc,-MD
+  else
+    tmpdepfile1=$dir$base.d
+    tmpdepfile2=$dir$base.d
+    tmpdepfile3=$dir$base.d
+    "$@" -MD
+  fi
 
-   stat=$?
-   if test $stat -eq 0; then :
-   else
-      rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4"
-      exit $stat
-   fi
+  stat=$?
+  if test $stat -ne 0; then
+    rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
+    exit $stat
+  fi
 
-   for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4"
-   do
-     test -f "$tmpdepfile" && break
-   done
-   if test -f "$tmpdepfile"; then
-      sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
-      # That's a tab and a space in the [].
-      sed -e 's,^.*\.[a-z]*:[	 ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
-   else
-      echo "#dummy" > "$depfile"
-   fi
-   rm -f "$tmpdepfile"
-   ;;
+  for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
+  do
+    test -f "$tmpdepfile" && break
+  done
+  # Same post-processing that is required for AIX mode.
+  aix_post_process_depfile
+  ;;
+
+msvc7)
+  if test "$libtool" = yes; then
+    showIncludes=-Wc,-showIncludes
+  else
+    showIncludes=-showIncludes
+  fi
+  "$@" $showIncludes > "$tmpdepfile"
+  stat=$?
+  grep -v '^Note: including file: ' "$tmpdepfile"
+  if test $stat -ne 0; then
+    rm -f "$tmpdepfile"
+    exit $stat
+  fi
+  rm -f "$depfile"
+  echo "$object : \\" > "$depfile"
+  # The first sed program below extracts the file names and escapes
+  # backslashes for cygpath.  The second sed program outputs the file
+  # name when reading, but also accumulates all include files in the
+  # hold buffer in order to output them again at the end.  This only
+  # works with sed implementations that can handle large buffers.
+  sed < "$tmpdepfile" -n '
+/^Note: including file:  *\(.*\)/ {
+  s//\1/
+  s/\\/\\\\/g
+  p
+}' | $cygpath_u | sort -u | sed -n '
+s/ /\\ /g
+s/\(.*\)/'"$tab"'\1 \\/p
+s/.\(.*\) \\/\1:/
+H
+$ {
+  s/.*/'"$tab"'/
+  G
+  p
+}' >> "$depfile"
+  echo >> "$depfile" # make sure the fragment doesn't end with a backslash
+  rm -f "$tmpdepfile"
+  ;;
+
+msvc7msys)
+  # This case exists only to let depend.m4 do its work.  It works by
+  # looking at the text of this script.  This case will never be run,
+  # since it is checked for above.
+  exit 1
+  ;;
 
 #nosideeffect)
   # This comment above is used by automake to tell side-effect
@@ -345,13 +574,13 @@ dashmstdout)
 
   # Remove the call to Libtool.
   if test "$libtool" = yes; then
-    while test $1 != '--mode=compile'; do
+    while test "X$1" != 'X--mode=compile'; do
       shift
     done
     shift
   fi
 
-  # Remove `-o $object'.
+  # Remove '-o $object'.
   IFS=" "
   for arg
   do
@@ -371,18 +600,18 @@ dashmstdout)
   done
 
   test -z "$dashmflag" && dashmflag=-M
-  # Require at least two characters before searching for `:'
+  # Require at least two characters before searching for ':'
   # in the target name.  This is to cope with DOS-style filenames:
-  # a dependency such as `c:/foo/bar' could be seen as target `c' otherwise.
+  # a dependency such as 'c:/foo/bar' could be seen as target 'c' otherwise.
   "$@" $dashmflag |
-    sed 's:^[  ]*[^: ][^:][^:]*\:[    ]*:'"$object"'\: :' > "$tmpdepfile"
+    sed "s|^[$tab ]*[^:$tab ][^:][^:]*:[$tab ]*|$object: |" > "$tmpdepfile"
   rm -f "$depfile"
   cat < "$tmpdepfile" > "$depfile"
-  tr ' ' '
-' < "$tmpdepfile" | \
-## Some versions of the HPUX 10.20 sed can't process this invocation
-## correctly.  Breaking it into two sed invocations is a workaround.
-    sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
+  # Some versions of the HPUX 10.20 sed can't process this sed invocation
+  # correctly.  Breaking it into two sed invocations is a workaround.
+  tr ' ' "$nl" < "$tmpdepfile" \
+    | sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' \
+    | sed -e 's/$/ :/' >> "$depfile"
   rm -f "$tmpdepfile"
   ;;
 
@@ -396,41 +625,51 @@ makedepend)
   "$@" || exit $?
   # Remove any Libtool call
   if test "$libtool" = yes; then
-    while test $1 != '--mode=compile'; do
+    while test "X$1" != 'X--mode=compile'; do
       shift
     done
     shift
   fi
   # X makedepend
   shift
-  cleared=no
-  for arg in "$@"; do
+  cleared=no eat=no
+  for arg
+  do
     case $cleared in
     no)
       set ""; shift
       cleared=yes ;;
     esac
+    if test $eat = yes; then
+      eat=no
+      continue
+    fi
     case "$arg" in
     -D*|-I*)
       set fnord "$@" "$arg"; shift ;;
     # Strip any option that makedepend may not understand.  Remove
     # the object too, otherwise makedepend will parse it as a source file.
+    -arch)
+      eat=yes ;;
     -*|$object)
       ;;
     *)
       set fnord "$@" "$arg"; shift ;;
     esac
   done
-  obj_suffix="`echo $object | sed 's/^.*\././'`"
+  obj_suffix=`echo "$object" | sed 's/^.*\././'`
   touch "$tmpdepfile"
   ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@"
   rm -f "$depfile"
-  cat < "$tmpdepfile" > "$depfile"
-  sed '1,2d' "$tmpdepfile" | tr ' ' '
-' | \
-## Some versions of the HPUX 10.20 sed can't process this invocation
-## correctly.  Breaking it into two sed invocations is a workaround.
-    sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
+  # makedepend may prepend the VPATH from the source file name to the object.
+  # No need to regex-escape $object, excess matching of '.' is harmless.
+  sed "s|^.*\($object *:\)|\1|" "$tmpdepfile" > "$depfile"
+  # Some versions of the HPUX 10.20 sed can't process the last invocation
+  # correctly.  Breaking it into two sed invocations is a workaround.
+  sed '1,2d' "$tmpdepfile" \
+    | tr ' ' "$nl" \
+    | sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' \
+    | sed -e 's/$/ :/' >> "$depfile"
   rm -f "$tmpdepfile" "$tmpdepfile".bak
   ;;
 
@@ -441,13 +680,13 @@ cpp)
 
   # Remove the call to Libtool.
   if test "$libtool" = yes; then
-    while test $1 != '--mode=compile'; do
+    while test "X$1" != 'X--mode=compile'; do
       shift
     done
     shift
   fi
 
-  # Remove `-o $object'.
+  # Remove '-o $object'.
   IFS=" "
   for arg
   do
@@ -466,10 +705,10 @@ cpp)
     esac
   done
 
-  "$@" -E |
-    sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \
-       -e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' |
-    sed '$ s: \\$::' > "$tmpdepfile"
+  "$@" -E \
+    | sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \
+             -e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \
+    | sed '$ s: \\$::' > "$tmpdepfile"
   rm -f "$depfile"
   echo "$object : \\" > "$depfile"
   cat < "$tmpdepfile" >> "$depfile"
@@ -479,35 +718,56 @@ cpp)
 
 msvisualcpp)
   # Important note: in order to support this mode, a compiler *must*
-  # always write the preprocessed file to stdout, regardless of -o,
-  # because we must use -o when running libtool.
+  # always write the preprocessed file to stdout.
   "$@" || exit $?
+
+  # Remove the call to Libtool.
+  if test "$libtool" = yes; then
+    while test "X$1" != 'X--mode=compile'; do
+      shift
+    done
+    shift
+  fi
+
   IFS=" "
   for arg
   do
     case "$arg" in
+    -o)
+      shift
+      ;;
+    $object)
+      shift
+      ;;
     "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI")
-	set fnord "$@"
-	shift
-	shift
-	;;
+        set fnord "$@"
+        shift
+        shift
+        ;;
     *)
-	set fnord "$@" "$arg"
-	shift
-	shift
-	;;
+        set fnord "$@" "$arg"
+        shift
+        shift
+        ;;
     esac
   done
-  "$@" -E |
-  sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::echo "`cygpath -u \\"\1\\"`":p' | sort | uniq > "$tmpdepfile"
+  "$@" -E 2>/dev/null |
+  sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::\1:p' | $cygpath_u | sort -u > "$tmpdepfile"
   rm -f "$depfile"
   echo "$object : \\" > "$depfile"
-  . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s::	\1 \\:p' >> "$depfile"
-  echo "	" >> "$depfile"
-  . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s::\1\::p' >> "$depfile"
+  sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::'"$tab"'\1 \\:p' >> "$depfile"
+  echo "$tab" >> "$depfile"
+  sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::\1\::p' >> "$depfile"
   rm -f "$tmpdepfile"
   ;;
 
+msvcmsys)
+  # This case exists only to let depend.m4 do its work.  It works by
+  # looking at the text of this script.  This case will never be run,
+  # since it is checked for above.
+  exit 1
+  ;;
+
 none)
   exec "$@"
   ;;
@@ -523,8 +783,9 @@ exit 0
 # Local Variables:
 # mode: shell-script
 # sh-indentation: 2
-# eval: (add-hook 'write-file-hooks 'time-stamp)
+# eval: (add-hook 'before-save-hook 'time-stamp)
 # time-stamp-start: "scriptversion="
 # time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-end: "$"
+# time-stamp-time-zone: "UTC0"
+# time-stamp-end: "; # UTC"
 # End:

docs/AUTHORS

@@ -6,32 +6,57 @@
 Adam Gobiowski
 Alexander Holyapin
 Alexander Lamaison
+Alfred Gebert
 Ben Kibbey
 Bjorn Stenborg
 Carlo Bramini
+Cristian Rodríguez
+Daiki Ueno
 Dan Casey
 Dan Fandrich
 Daniel Stenberg
+Dave Hayden
+Dave McCaldon
 David J Sullivan
 David Robins
+Dmitry Smirnov
+Douglas Masterson
 Edink Kadribasic
 Erik Brossler
 Francois Dupoux
+Gellule Xg
+Grubsky Grigory
 Guenter Knauf
 Heiner Steven
+Henrik Nordstrom
 James Housleys
+Jasmeet Bagga
 Jean-Louis Charton
+Jernej Kovacic
+Joey Degges
+John Little
+Jose Baars
 Jussi Mononen
+Kamil Dudka
+Lars Nordin
 Mark McPherson
+Mark Smith
 Markus Moeller
+Matt Lilley
+Matthew Booth
+Maxime Larocque
 Mike Protts
 Mikhail Gusarov
 Neil Gierman
 Olivier Hervieu
+Paul Howarth
+Paul Querna
 Paul Veldkamp
 Peter Krempa
 Peter O'Gorman
 Peter Stuge
+Pierre Joye
+Rafael Kitover
 Romain Bondue
 Sara Golemon
 Satish Mittal
@@ -39,10 +64,16 @@ Sean Peterson
 Selcuk Gueney
 Simon Hart
 Simon Josefsson
+Sofian Brabez
 Steven Ayre
+Steven Dake
 Steven Van Ingelgem
+TJ Saunders
+Tommy Lindgren
 Tor Arntsen
 Vincent Jaulin
+Vincent Torri
 Vlad Grachov
 Wez Furlong
 Yang Tse
+Zl Liu

docs/BINDINGS

@@ -0,0 +1,29 @@
+
+Creative people have written bindings or interfaces for various environments
+and programming languages. Using one of these bindings allows you to take
+advantage of libssh2 directly from within your favourite language.
+
+The bindings listed below are not part of the libssh2 distribution archives,
+but must be downloaded and installed separately.
+
+Cocoa/Objective-C
+  https://github.com/karelia/libssh2_sftp-Cocoa-wrapper
+
+Haskell
+  FFI bindings - https://hackage.haskell.org/package/libssh2
+
+Perl
+  Net::SSH2 - https://metacpan.org/pod/Net::SSH2
+
+PHP
+  ssh2 - https://pecl.php.net/package/ssh2
+
+Python
+  pylibssh2 - https://pypi.python.org/pypi/pylibssh2
+
+Python-ctypes
+
+  PySsh2 - https://github.com/gellule/PySsh2
+
+Ruby
+  libssh2-ruby - https://github.com/mitchellh/libssh2-ruby

docs/CMakeLists.txt

@@ -0,0 +1,206 @@
+# Copyright (c) 2014 Alexander Lamaison <alexander.lamaison@gmail.com>
+#
+# Redistribution and use in source and binary forms,
+# with or without modification, are permitted provided
+# that the following conditions are met:
+#
+#   Redistributions of source code must retain the above
+#   copyright notice, this list of conditions and the
+#   following disclaimer.
+#
+#   Redistributions in binary form must reproduce the above
+#   copyright notice, this list of conditions and the following
+#   disclaimer in the documentation and/or other materials
+#   provided with the distribution.
+#
+#   Neither the name of the copyright holder nor the names
+#   of any other contributors may be used to endorse or
+#   promote products derived from this software without
+#   specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+# CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+# INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+# OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+# CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+# SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+# NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
+# USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
+# OF SUCH DAMAGE.
+
+set(MAN_PAGES
+  libssh2_agent_connect.3
+  libssh2_agent_disconnect.3
+  libssh2_agent_free.3
+  libssh2_agent_get_identity.3
+  libssh2_agent_init.3
+  libssh2_agent_list_identities.3
+  libssh2_agent_userauth.3
+  libssh2_banner_set.3
+  libssh2_base64_decode.3
+  libssh2_channel_close.3
+  libssh2_channel_direct_tcpip.3
+  libssh2_channel_direct_tcpip_ex.3
+  libssh2_channel_eof.3
+  libssh2_channel_exec.3
+  libssh2_channel_flush.3
+  libssh2_channel_flush_ex.3
+  libssh2_channel_flush_stderr.3
+  libssh2_channel_forward_accept.3
+  libssh2_channel_forward_cancel.3
+  libssh2_channel_forward_listen.3
+  libssh2_channel_forward_listen_ex.3
+  libssh2_channel_free.3
+  libssh2_channel_get_exit_signal.3
+  libssh2_channel_get_exit_status.3
+  libssh2_channel_handle_extended_data.3
+  libssh2_channel_handle_extended_data2.3
+  libssh2_channel_ignore_extended_data.3
+  libssh2_channel_open_ex.3
+  libssh2_channel_open_session.3
+  libssh2_channel_process_startup.3
+  libssh2_channel_read.3
+  libssh2_channel_read_ex.3
+  libssh2_channel_read_stderr.3
+  libssh2_channel_receive_window_adjust.3
+  libssh2_channel_receive_window_adjust2.3
+  libssh2_channel_request_pty.3
+  libssh2_channel_request_pty_ex.3
+  libssh2_channel_request_pty_size.3
+  libssh2_channel_request_pty_size_ex.3
+  libssh2_channel_send_eof.3
+  libssh2_channel_set_blocking.3
+  libssh2_channel_setenv.3
+  libssh2_channel_setenv_ex.3
+  libssh2_channel_shell.3
+  libssh2_channel_subsystem.3
+  libssh2_channel_wait_closed.3
+  libssh2_channel_wait_eof.3
+  libssh2_channel_window_read.3
+  libssh2_channel_window_read_ex.3
+  libssh2_channel_window_write.3
+  libssh2_channel_window_write_ex.3
+  libssh2_channel_write.3
+  libssh2_channel_write_ex.3
+  libssh2_channel_write_stderr.3
+  libssh2_channel_x11_req.3
+  libssh2_channel_x11_req_ex.3
+  libssh2_exit.3
+  libssh2_free.3
+  libssh2_hostkey_hash.3
+  libssh2_init.3
+  libssh2_keepalive_config.3
+  libssh2_keepalive_send.3
+  libssh2_knownhost_add.3
+  libssh2_knownhost_addc.3
+  libssh2_knownhost_check.3
+  libssh2_knownhost_checkp.3
+  libssh2_knownhost_del.3
+  libssh2_knownhost_free.3
+  libssh2_knownhost_get.3
+  libssh2_knownhost_init.3
+  libssh2_knownhost_readfile.3
+  libssh2_knownhost_readline.3
+  libssh2_knownhost_writefile.3
+  libssh2_knownhost_writeline.3
+  libssh2_poll.3
+  libssh2_poll_channel_read.3
+  libssh2_publickey_add.3
+  libssh2_publickey_add_ex.3
+  libssh2_publickey_init.3
+  libssh2_publickey_list_fetch.3
+  libssh2_publickey_list_free.3
+  libssh2_publickey_remove.3
+  libssh2_publickey_remove_ex.3
+  libssh2_publickey_shutdown.3
+  libssh2_scp_recv.3
+  libssh2_scp_recv2.3
+  libssh2_scp_send.3
+  libssh2_scp_send64.3
+  libssh2_scp_send_ex.3
+  libssh2_session_abstract.3
+  libssh2_session_banner_get.3
+  libssh2_session_banner_set.3
+  libssh2_session_block_directions.3
+  libssh2_session_callback_set.3
+  libssh2_session_disconnect.3
+  libssh2_session_disconnect_ex.3
+  libssh2_session_flag.3
+  libssh2_session_free.3
+  libssh2_session_get_blocking.3
+  libssh2_session_get_timeout.3
+  libssh2_session_hostkey.3
+  libssh2_session_init.3
+  libssh2_session_init_ex.3
+  libssh2_session_last_errno.3
+  libssh2_session_last_error.3
+  libssh2_session_set_last_error.3
+  libssh2_session_method_pref.3
+  libssh2_session_methods.3
+  libssh2_session_set_blocking.3
+  libssh2_session_set_timeout.3
+  libssh2_session_startup.3
+  libssh2_session_supported_algs.3
+  libssh2_sftp_close.3
+  libssh2_sftp_close_handle.3
+  libssh2_sftp_closedir.3
+  libssh2_sftp_fsetstat.3
+  libssh2_sftp_fstat.3
+  libssh2_sftp_fstat_ex.3
+  libssh2_sftp_fstatvfs.3
+  libssh2_sftp_fsync.3
+  libssh2_sftp_get_channel.3
+  libssh2_sftp_init.3
+  libssh2_sftp_last_error.3
+  libssh2_sftp_lstat.3
+  libssh2_sftp_mkdir.3
+  libssh2_sftp_mkdir_ex.3
+  libssh2_sftp_open.3
+  libssh2_sftp_open_ex.3
+  libssh2_sftp_opendir.3
+  libssh2_sftp_read.3
+  libssh2_sftp_readdir.3
+  libssh2_sftp_readdir_ex.3
+  libssh2_sftp_readlink.3
+  libssh2_sftp_realpath.3
+  libssh2_sftp_rename.3
+  libssh2_sftp_rename_ex.3
+  libssh2_sftp_rewind.3
+  libssh2_sftp_rmdir.3
+  libssh2_sftp_rmdir_ex.3
+  libssh2_sftp_seek.3
+  libssh2_sftp_seek64.3
+  libssh2_sftp_setstat.3
+  libssh2_sftp_shutdown.3
+  libssh2_sftp_stat.3
+  libssh2_sftp_stat_ex.3
+  libssh2_sftp_statvfs.3
+  libssh2_sftp_symlink.3
+  libssh2_sftp_symlink_ex.3
+  libssh2_sftp_tell.3
+  libssh2_sftp_tell64.3
+  libssh2_sftp_unlink.3
+  libssh2_sftp_unlink_ex.3
+  libssh2_sftp_write.3
+  libssh2_trace.3
+  libssh2_trace_sethandler.3
+  libssh2_userauth_authenticated.3
+  libssh2_userauth_hostbased_fromfile.3
+  libssh2_userauth_hostbased_fromfile_ex.3
+  libssh2_userauth_keyboard_interactive.3
+  libssh2_userauth_keyboard_interactive_ex.3
+  libssh2_userauth_list.3
+  libssh2_userauth_password.3
+  libssh2_userauth_password_ex.3
+  libssh2_userauth_publickey.3
+  libssh2_userauth_publickey_fromfile.3
+  libssh2_userauth_publickey_fromfile_ex.3
+  libssh2_version.3)
+
+include(GNUInstallDirs)
+install(FILES ${MAN_PAGES} DESTINATION ${CMAKE_INSTALL_MANDIR}/man3)

docs/HACKING.CRYPTO

@@ -0,0 +1,593 @@
+	Definitions needed to implement a specific crypto library
+
+This document offers some hints about implementing a new crypto library
+interface.
+
+A crypto library interface consists of at least a header file, defining
+entities referenced from the libssh2 core modules.
+Real code implementation (if needed), is left at the implementor's choice.
+
+This document lists the entities that must/may be defined in the header file.
+
+Procedures listed as "void" may indeed have a result type: the void indication
+indicates the libssh2 core modules never use the function result.
+
+
+1) Crypto library initialization/termination.
+
+void libssh2_crypto_init(void);
+Initializes the crypto library. May be an empty macro if not needed.
+
+void libssh2_crypto_exit(void);
+Terminates the crypto library use. May be an empty macro if not needed.
+
+
+2) HMAC
+
+libssh2_hmac_ctx
+Type of an HMAC computation context. Generally a struct.
+Used for all hash algorithms.
+
+void libssh2_hmac_ctx_init(libssh2_hmac_ctx ctx);
+Initializes the HMAC computation context ctx.
+Called before setting-up the hash algorithm.
+Note: if the ctx parameter is modified by the underlying code,
+this procedure must be implemented as a macro to map ctx --> &ctx.
+
+void libssh2_hmac_update(libssh2_hmac_ctx ctx,
+	                 const unsigned char *data,
+	                 int datalen);
+Continue computation of an HMAC on datalen bytes at data using context ctx.
+Note: if the ctx parameter is modified by the underlying code,
+this procedure must be implemented as a macro to map ctx --> &ctx.
+
+void libssh2_hmac_final(libssh2_hmac_ctx ctx,
+	                unsigned char output[]);
+Get the computed HMAC from context ctx into the output buffer. The
+minimum data buffer size depends on the HMAC hash algorithm.
+Note: if the ctx parameter is modified by the underlying code,
+this procedure must be implemented as a macro to map ctx --> &ctx.
+
+void libssh2_hmac_cleanup(libssh2_hmac_ctx *ctx);
+Releases the HMAC computation context at ctx.
+
+
+3) Hash algorithms.
+
+3.1) SHA-1
+Must always be implemented.
+
+SHA_DIGEST_LENGTH
+#define to 20, the SHA-1 digest length.
+
+libssh2_sha1_ctx
+Type of an SHA1 computation context. Generally a struct.
+
+int libssh2_sha1_init(libssh2_sha1_ctx *x);
+Initializes the SHA-1 computation context at x.
+Returns 1 for success and 0 for failure
+
+void libssh2_sha1_update(libssh2_sha1_ctx ctx,
+	                 const unsigned char *data,
+	                 size_t len);
+Continue computation of SHA-1 on len bytes at data using context ctx.
+Note: if the ctx parameter is modified by the underlying code,
+this procedure must be implemented as a macro to map ctx --> &ctx.
+
+void libssh2_sha1_final(libssh2_sha1_ctx ctx,
+                        unsigned char output[SHA1_DIGEST_LEN]);
+Get the computed SHA-1 signature from context ctx and store it into the
+output buffer.
+Release the context.
+Note: if the ctx parameter is modified by the underlying code,
+this procedure must be implemented as a macro to map ctx --> &ctx.
+
+void libssh2_hmac_sha1_init(libssh2_hmac_ctx *ctx,
+	                    const void *key,
+	                    int keylen);
+Setup the HMAC computation context ctx for an HMAC-SHA-1 computation using the
+keylen-byte key. Is invoked just after libssh2_hmac_ctx_init().
+
+3.2) SHA-256
+Must always be implemented.
+
+SHA256_DIGEST_LENGTH
+#define to 32, the SHA-256 digest length.
+
+libssh2_sha256_ctx
+Type of an SHA-256 computation context. Generally a struct.
+
+int libssh2_sha256_init(libssh2_sha256_ctx *x);
+Initializes the SHA-256 computation context at x.
+Returns 1 for success and 0 for failure
+
+void libssh2_sha256_update(libssh2_sha256_ctx ctx,
+	                   const unsigned char *data,
+	                   size_t len);
+Continue computation of SHA-256 on len bytes at data using context ctx.
+Note: if the ctx parameter is modified by the underlying code,
+this procedure must be implemented as a macro to map ctx --> &ctx.
+
+void libssh2_sha256_final(libssh2_sha256_ctx ctx,
+	                  unsigned char output[SHA256_DIGEST_LENGTH]);
+Gets the computed SHA-256 signature from context ctx into the output buffer.
+Release the context.
+Note: if the ctx parameter is modified by the underlying code,
+this procedure must be implemented as a macro to map ctx --> &ctx.
+
+int libssh2_sha256(const unsigned char *message,
+                   unsigned long len,
+                   unsigned char output[SHA256_DIGEST_LENGTH]);
+Computes the SHA-256 signature over the given message of length len and
+store the result into the output buffer.
+Return 1 if error, else 0.
+Note: Seems unused in current code, but defined in each crypto library backend.
+
+LIBSSH2_HMAC_SHA256
+#define as 1 if the crypto library supports HMAC-SHA-256, else 0.
+If defined as 0, the rest of this section can be omitted.
+
+void libssh2_hmac_sha256_init(libssh2_hmac_ctx *ctx,
+	                      const void *key,
+	                      int keylen);
+Setup the HMAC computation context ctx for an HMAC-256 computation using the
+keylen-byte key. Is invoked just after libssh2_hmac_ctx_init().
+
+3.3) SHA-512
+LIBSSH2_HMAC_SHA512
+#define as 1 if the crypto library supports HMAC-SHA-512, else 0.
+If defined as 0, the rest of this section can be omitted.
+
+SHA512_DIGEST_LENGTH
+#define to 64, the SHA-512 digest length.
+
+void libssh2_hmac_sha512_init(libssh2_hmac_ctx *ctx,
+	                      const void *key,
+	                      int keylen);
+Setup the HMAC computation context ctx for an HMAC-512 computation using the
+keylen-byte key. Is invoked just after libssh2_hmac_ctx_init().
+
+3.4) MD5
+LIBSSH2_MD5
+#define to 1 if the crypto library supports MD5, else 0.
+If defined as 0, the rest of this section can be omitted.
+
+MD5_DIGEST_LENGTH
+#define to 16, the MD5 digest length.
+
+libssh2_md5_ctx
+Type of an MD5 computation context. Generally a struct.
+
+int libssh2_md5_init(libssh2_md5_ctx *x);
+Initializes the MD5 computation context at x.
+Returns 1 for success and 0 for failure
+
+void libssh2_md5_update(libssh2_md5_ctx ctx,
+	                const unsigned char *data,
+	                size_t len);
+Continues computation of MD5 on len bytes at data using context ctx.
+Returns 1 for success and 0 for failure.
+Note: if the ctx parameter is modified by the underlying code,
+this procedure must be implemented as a macro to map ctx --> &ctx.
+
+void libssh2_md5_final(libssh2_md5_ctx ctx,
+	               unsigned char output[MD5_DIGEST_LENGTH]);
+Gets the computed MD5 signature from context ctx into the output buffer.
+Release the context.
+Note: if the ctx parameter is modified by the underlying code,
+this procedure must be implemented as a macro to map ctx --> &ctx.
+
+void libssh2_hmac_md5_init(libssh2_hmac_ctx *ctx,
+	                   const void *key,
+	                   int keylen);
+Setup the HMAC computation context ctx for an HMAC-MD5 computation using the
+keylen-byte key. Is invoked just after libssh2_hmac_ctx_init().
+
+3.5) RIPEMD-160
+LIBSSH2_HMAC_RIPEMD
+#define as 1 if the crypto library supports HMAC-RIPEMD-160, else 0.
+If defined as 0, the rest of this section can be omitted.
+
+void libssh2_hmac_ripemd160_init(libssh2_hmac_ctx *ctx,
+	                         const void *key,
+	                         int keylen);
+Setup the HMAC computation context ctx for an HMAC-RIPEMD-160 computation using
+the keylen-byte key. Is invoked just after libssh2_hmac_ctx_init().
+Returns 1 for success and 0 for failure.
+
+
+4) Bidirectional Key ciphers.
+
+_libssh2_cipher_ctx
+Type of a cipher computation context.
+
+_libssh2_cipher_type(name);
+Macro defining name as storage identifying a cipher algorithm for
+the crypto library interface. No trailing semicolon.
+
+int _libssh2_cipher_init(_libssh2_cipher_ctx *h,
+                         _libssh2_cipher_type(algo),
+                         unsigned char *iv,
+                         unsigned char *secret,
+                         int encrypt);
+Creates a cipher context for the given algorithm with the initialization vector
+iv and the secret key secret. Prepare for encryption or decryption depending on
+encrypt.
+Return 0 if OK, else -1.
+This procedure is already prototyped in crypto.h.
+
+int _libssh2_cipher_crypt(_libssh2_cipher_ctx *ctx,
+                          _libssh2_cipher_type(algo),
+                          int encrypt,
+                          unsigned char *block,
+                          size_t blocksize);
+Encrypt or decrypt in-place data at (block, blocksize) using the given
+context and/or algorithm.
+Return 0 if OK, else -1.
+This procedure is already prototyped in crypto.h.
+
+void _libssh2_cipher_dtor(_libssh2_cipher_ctx *ctx);
+Release cipher context at ctx.
+
+4.1) AES
+4.1.1) AES in CBC block mode.
+LIBSSH2_AES
+#define as 1 if the crypto library supports AES in CBC mode, else 0.
+If defined as 0, the rest of this section can be omitted.
+
+_libssh2_cipher_aes128
+AES-128-CBC algorithm identifier initializer.
+#define with constant value of type _libssh2_cipher_type().
+
+_libssh2_cipher_aes192
+AES-192-CBC algorithm identifier initializer.
+#define with constant value of type _libssh2_cipher_type().
+
+_libssh2_cipher_aes256
+AES-256-CBC algorithm identifier initializer.
+#define with constant value of type _libssh2_cipher_type().
+
+4.1.2) AES in CTR block mode.
+LIBSSH2_AES_CTR
+#define as 1 if the crypto library supports AES in CTR mode, else 0.
+If defined as 0, the rest of this section can be omitted.
+
+void _libssh2_init_aes_ctr(void);
+Initialize static AES CTR ciphers.
+This procedure is already prototyped in crypto.h.
+
+_libssh2_cipher_aes128ctr
+AES-128-CTR algorithm identifier initializer.
+#define with constant value of type _libssh2_cipher_type().
+
+_libssh2_cipher_aes192ctr
+AES-192-CTR algorithm identifier initializer.
+#define with constant value of type _libssh2_cipher_type().
+
+_libssh2_cipher_aes256ctr
+AES-256-CTR algorithm identifier initializer.
+#define with constant value of type _libssh2_cipher_type().
+
+4.2) Blowfish in CBC block mode.
+LIBSSH2_BLOWFISH
+#define as 1 if the crypto library supports blowfish in CBC mode, else 0.
+If defined as 0, the rest of this section can be omitted.
+
+_libssh2_cipher_blowfish
+Blowfish-CBC algorithm identifier initializer.
+#define with constant value of type _libssh2_cipher_type().
+
+4.3) RC4.
+LIBSSH2_RC4
+#define as 1 if the crypto library supports RC4 (arcfour), else 0.
+If defined as 0, the rest of this section can be omitted.
+
+_libssh2_cipher_arcfour
+RC4 algorithm identifier initializer.
+#define with constant value of type _libssh2_cipher_type().
+
+4.4) CAST5 in CBC block mode.
+LIBSSH2_CAST
+#define 1 if the crypto library supports cast, else 0.
+If defined as 0, the rest of this section can be omitted.
+
+_libssh2_cipher_cast5
+CAST5-CBC algorithm identifier initializer.
+#define with constant value of type _libssh2_cipher_type().
+
+4.5) Tripple DES in CBC block mode.
+LIBSSH2_3DES
+#define as 1 if the crypto library supports TripleDES in CBC mode, else 0.
+If defined as 0, the rest of this section can be omitted.
+
+_libssh2_cipher_3des
+TripleDES-CBC algorithm identifier initializer.
+#define with constant value of type _libssh2_cipher_type().
+
+
+5) Big numbers.
+Positive multi-byte integers support is sufficient.
+
+5.1) Computation contexts.
+This has a real meaning if the big numbers computations need some context
+storage. If not, use a dummy type and functions (macros).
+
+_libssh2_bn_ctx
+Type of multiple precision computation context. May not be empty. if not used,
+#define as char, for example.
+
+libssh2_bn_ctx _libssh2_bn_ctx_new(void);
+Returns a new multiple precision computation context.
+
+void _libssh2_bn_ctx_free(_libssh2_bn_ctx ctx);
+Releases a multiple precision computation context.
+
+5.2) Computation support.
+_libssh2_bn
+Type of multiple precision numbers (aka bignumbers or huge integers) for the
+crypto library.
+
+_libssh2_bn * _libssh2_bn_init(void);
+Creates a multiple precision number (preset to zero).
+
+_libssh2_bn * _libssh2_bn_init_from_bin(void);
+Create a multiple precision number intended to be set by the
+_libssh2_bn_from_bin() function (see below). Unlike _libssh2_bn_init(), this
+code may be a dummy initializer if the _libssh2_bn_from_bin() actually
+allocates the number. Returns a value of type _libssh2_bn *.
+
+void _libssh2_bn_free(_libssh2_bn *bn);
+Destroys the multiple precision number at bn.
+
+unsigned long _libssh2_bn_bytes(libssh2_bn *bn);
+Get the number of bytes needed to store the bits of the multiple precision
+number at bn.
+
+unsigned long _libssh2_bn_bits(_libssh2_bn *bn);
+Returns the number of bits of multiple precision number at bn.
+
+int _libssh2_bn_set_word(_libssh2_bn *bn, unsigned long val);
+Sets the value of bn to val.
+Returns 1 on success, 0 otherwise.
+
+_libssh2_bn * _libssh2_bn_from_bin(_libssh2_bn *bn, int len,
+	                           const unsigned char *val);
+Converts the positive integer in big-endian form of length len at val
+into a _libssh2_bn and place it in bn. If bn is NULL, a new _libssh2_bn is
+created.
+Returns a pointer to target _libssh2_bn or NULL if error.
+
+int _libssh2_bn_to_bin(_libssh2_bn *bn, unsigned char *val);
+Converts the absolute value of bn into big-endian form and store it at
+val. val must point to _libssh2_bn_bytes(bn) bytes of memory.
+Returns the length of the big-endian number.
+
+void _libssh2_bn_rand(_libssh2_bn *bn, int bits, int top, int bottom);
+Generates a cryptographically strong pseudo-random number of bits in
+length and stores it in bn. If top is -1, the most significant bit of the
+random number can be zero. If top is 0, it is set to 1, and if top is 1, the
+two most significant bits of the number will be set to 1, so that the product
+of two such random numbers will always have 2*bits length. If bottom is true,
+the number will be odd.
+
+void _libssh2_bn_mod_exp(_libssh2_bn *r, _libssh2_bn *a,
+	                 _libssh2_bn *p, _libssh2_bn *m,
+	                 _libssh2_bn_ctx *ctx);
+Computes a to the p-th power modulo m and stores the result into r (r=a^p % m).
+May use the given context.
+
+
+6) Private key algorithms.
+Format of an RSA public key:
+a) "ssh-rsa".
+b) RSA exponent, MSB first, with high order bit = 0.
+c) RSA modulus, MSB first, with high order bit = 0.
+Each item is preceded by its 32-bit byte length, MSB first.
+
+Format of a DSA public key:
+a) "ssh-dss".
+b) p, MSB first, with high order bit = 0.
+c) q, MSB first, with high order bit = 0.
+d) g, MSB first, with high order bit = 0.
+e) pub_key, MSB first, with high order bit = 0.
+Each item is preceded by its 32-bit byte length, MSB first.
+
+int _libssh2_pub_priv_keyfile(LIBSSH2_SESSION *session,
+                              unsigned char **method,
+                              size_t *method_len,
+                              unsigned char **pubkeydata,
+                              size_t *pubkeydata_len,
+                              const char *privatekey,
+                              const char *passphrase);
+Reads a private key from file privatekey and extract the public key -->
+(pubkeydata, pubkeydata_len). Store the associated method (ssh-rsa or ssh-dss)
+into (method, method_len).
+Both buffers have to be allocated using LIBSSH2_ALLOC().
+Returns 0 if OK, else -1.
+This procedure is already prototyped in crypto.h.
+
+int _libssh2_pub_priv_keyfilememory(LIBSSH2_SESSION *session,
+                                    unsigned char **method,
+                                    size_t *method_len,
+                                    unsigned char **pubkeydata,
+                                    size_t *pubkeydata_len,
+                                    const char *privatekeydata,
+                                    size_t privatekeydata_len,
+                                    const char *passphrase);
+Gets a private key from bytes at (privatekeydata, privatekeydata_len) and
+extract the public key --> (pubkeydata, pubkeydata_len). Store the associated
+method (ssh-rsa or ssh-dss) into (method, method_len).
+Both buffers have to be allocated using LIBSSH2_ALLOC().
+Returns 0 if OK, else -1.
+This procedure is already prototyped in crypto.h.
+
+6.1) RSA
+LIBSSH2_RSA
+#define as 1 if the crypto library supports RSA, else 0.
+If defined as 0, the rest of this section can be omitted.
+
+libssh2_rsa_ctx
+Type of an RSA computation context. Generally a struct.
+
+int _libssh2_rsa_new(libssh2_rsa_ctx **rsa,
+                     const unsigned char *edata,
+                     unsigned long elen,
+                     const unsigned char *ndata,
+                     unsigned long nlen,
+                     const unsigned char *ddata,
+                     unsigned long dlen,
+                     const unsigned char *pdata,
+                     unsigned long plen,
+                     const unsigned char *qdata,
+                     unsigned long qlen,
+                     const unsigned char *e1data,
+                     unsigned long e1len,
+                     const unsigned char *e2data,
+                     unsigned long e2len,
+                     const unsigned char *coeffdata, unsigned long coefflen);
+Creates a new context for RSA computations from key source values:
+	pdata, plen	Prime number p. Only used if private key known (ddata).
+	qdata, qlen	Prime number q. Only used if private key known (ddata).
+	ndata, nlen	Modulus n.
+	edata, elen	Exponent e.
+	ddata, dlen	e^-1 % phi(n) = private key. May be NULL if unknown.
+	e1data, e1len	dp = d % (p-1). Only used if private key known (dtata).
+	e2data, e2len	dq = d % (q-1). Only used if private key known (dtata).
+	coeffdata, coefflen	q^-1 % p. Only used if private key known.
+Returns 0 if OK.
+This procedure is already prototyped in crypto.h.
+Note: the current generic code only calls this function with e and n (public
+key parameters): unless used internally by the backend, it is not needed to
+support the private key and the other parameters here.
+
+int _libssh2_rsa_new_private(libssh2_rsa_ctx **rsa,
+                             LIBSSH2_SESSION *session,
+                             const char *filename,
+                             unsigned const char *passphrase);
+Reads an RSA private key from file filename into a new RSA context.
+Must call _libssh2_init_if_needed().
+Return 0 if OK, else -1.
+This procedure is already prototyped in crypto.h.
+
+int _libssh2_rsa_new_private_frommemory(libssh2_rsa_ctx **rsa,
+                                        LIBSSH2_SESSION *session,
+                                        const char *data,
+					size_t data_len,
+                                        unsigned const char *passphrase);
+Gets an RSA private key from data into a new RSA context.
+Must call _libssh2_init_if_needed().
+Return 0 if OK, else -1.
+This procedure is already prototyped in crypto.h.
+
+int _libssh2_rsa_sha1_verify(libssh2_rsa_ctx *rsa,
+                             const unsigned char *sig,
+                             unsigned long sig_len,
+                             const unsigned char *m, unsigned long m_len);
+Verify (sig, siglen) signature of (m, m_len) using an SHA-1 hash and the
+RSA context.
+Return 0 if OK, else -1.
+This procedure is already prototyped in crypto.h.
+
+int _libssh2_rsa_sha1_signv(LIBSSH2_SESSION *session,
+	                    unsigned char **sig, size_t *siglen,
+	                    int count, const struct iovec vector[],
+	                    libssh2_rsa_ctx *ctx);
+RSA signs the SHA-1 hash computed over the count data chunks in vector.
+Signature is stored at (sig, siglen).
+Signature buffer must be allocated from the given session.
+Returns 0 if OK, else -1.
+Note: this procedure is optional: if provided, it MUST be defined as a macro.
+
+int _libssh2_rsa_sha1_sign(LIBSSH2_SESSION *session,
+                           libssh2_rsa_ctx *rsactx,
+                           const unsigned char *hash,
+                           size_t hash_len,
+                           unsigned char **signature,
+                           size_t *signature_len);
+RSA signs the (hash, hashlen) SHA-1 hash bytes and stores the allocated
+signature at (signature, signature_len).
+Signature buffer must be allocated from the given session.
+Returns 0 if OK, else -1.
+This procedure is already prototyped in crypto.h.
+Note: this procedure is not used if macro _libssh2_rsa_sha1_signv() is defined.
+
+void _libssh2_rsa_free(libssh2_rsa_ctx *rsactx);
+Releases the RSA computation context at rsactx.
+
+
+6.2) DSA
+LIBSSH2_DSA
+#define as 1 if the crypto library supports DSA, else 0.
+If defined as 0, the rest of this section can be omitted.
+
+
+libssh2_dsa_ctx
+Type of a DSA computation context. Generally a struct.
+
+int _libssh2_dsa_new(libssh2_dsa_ctx **dsa,
+                     const unsigned char *pdata,
+                     unsigned long plen,
+                     const unsigned char *qdata,
+                     unsigned long qlen,
+                     const unsigned char *gdata,
+                     unsigned long glen,
+                     const unsigned char *ydata,
+                     unsigned long ylen,
+                     const unsigned char *x, unsigned long x_len);
+Creates a new context for DSA computations from source key values:
+	pdata, plen	Prime number p. Only used if private key known (ddata).
+	qdata, qlen	Prime number q. Only used if private key known (ddata).
+	gdata, glen	G number.
+	ydata, ylen	Public key.
+	xdata, xlen	Private key. Only taken if xlen non-zero.
+Returns 0 if OK.
+This procedure is already prototyped in crypto.h.
+
+int _libssh2_dsa_new_private(libssh2_dsa_ctx **dsa,
+                             LIBSSH2_SESSION *session,
+                             const char *filename,
+                             unsigned const char *passphrase);
+Gets a DSA private key from file filename into a new DSA context.
+Must call _libssh2_init_if_needed().
+Return 0 if OK, else -1.
+This procedure is already prototyped in crypto.h.
+
+int _libssh2_dsa_new_private_frommemory(libssh2_dsa_ctx **dsa,
+                                        LIBSSH2_SESSION *session,
+                                        const char *data,
+					size_t data_len,
+                                        unsigned const char *passphrase);
+Gets a DSA private key from the data_len-bytes data into a new DSA context.
+Must call _libssh2_init_if_needed().
+Returns 0 if OK, else -1.
+This procedure is already prototyped in crypto.h.
+
+int _libssh2_dsa_sha1_verify(libssh2_dsa_ctx *dsactx,
+                             const unsigned char *sig,
+                             const unsigned char *m, unsigned long m_len);
+Verify (sig, siglen) signature of (m, m_len) using an SHA1 hash and the
+DSA context.
+Returns 0 if OK, else -1.
+This procedure is already prototyped in crypto.h.
+
+int _libssh2_dsa_sha1_sign(libssh2_dsa_ctx *dsactx,
+                           const unsigned char *hash,
+                           unsigned long hash_len, unsigned char *sig);
+DSA signs the (hash, hash_len) data using SHA-1 and store the signature at sig.
+Returns 0 if OK, else -1.
+This procedure is already prototyped in crypto.h.
+
+void _libssh2_dsa_free(libssh2_dsa_ctx *dsactx);
+Releases the DSA computation context at dsactx.
+
+
+7) Miscellaneous
+
+void libssh2_prepare_iovec(struct iovec *vector, unsigned int len);
+Prepare len consecutive iovec slots before using them.
+In example, this is needed to preset unused structure slacks on platforms
+requiring it.
+If this is not needed, it should be defined as an empty macro.
+
+void _libssh2_random(unsigned char *buf, int len);
+Store len random bytes at buf.

docs/INSTALL_AUTOTOOLS

@@ -234,3 +234,106 @@ configuration-related scripts to be executed by `/bin/bash'.
 `configure' also accepts some other, not widely useful, options.  Run
 `configure --help' for more details.
 
+More configure options
+======================
+
+Some ./configure options deserve additional comments:
+
+ * --enable-crypt-none
+
+	The SSH2 Transport allows for unencrypted data
+	transmission using the "none" cipher.  Because this is
+	such a huge security hole, it is typically disabled on
+	SSH2 implementations and is disabled in libssh2 by
+	default as well.
+
+	Enabling this option will allow for "none" as a
+	negotiable method, however it still requires that the
+	method be advertized by the remote end and that no
+	more-preferable methods are available.
+
+ * --enable-mac-none
+
+	The SSH2 Transport also allows implementations to
+	forego a message authentication code.  While this is
+	less of a security risk than using a "none" cipher, it
+	is still not recommended as disabling MAC hashes
+	removes a layer of security.
+
+	Enabling this option will allow for "none" as a
+	negotiable method, however it still requires that the
+	method be advertized by the remote end and that no
+	more-preferable methods are available.
+
+ * --disable-gex-new
+
+	The diffie-hellman-group-exchange-sha1 (dh-gex) key
+	exchange method originally defined an exchange
+	negotiation using packet type 30 to request a
+	generation pair based on a single target value.  Later
+	refinement of dh-gex provided for range and target
+	values.  By default libssh2 will use the newer range
+	method.
+
+	If you experience trouble connecting to an old SSH
+	server using dh-gex, try this option to fallback on
+	the older more reliable method.
+
+ * --with-libgcrypt
+ * --without-libgcrypt
+ * --with-libgcrypt-prefix=DIR
+
+	libssh2 can use the Libgcrypt library
+	(https://www.gnupg.org/) for cryptographic operations.
+        One of the cryptographic libraries is required.
+
+	Configure will attempt to locate Libgcrypt
+	automatically.
+
+	If your installation of Libgcrypt is in another
+	location, specify it using --with-libgcrypt-prefix.
+
+ * --with-openssl
+ * --without-openssl
+ * --with-libssl-prefix=[DIR]
+
+	libssh2 can use the OpenSSL library
+	(https://www.openssl.org) for cryptographic operations.
+        One of the cryptographic libraries is required.
+
+	Configure will attempt to locate OpenSSL in the
+	default location.
+
+	If your installation of OpenSSL is in another
+	location, specify it using --with-libssl-prefix.
+
+ * --with-mbedtls
+ * --without-mbedtls
+ * --with-libmbedtls-prefix=[DIR]
+
+        libssh2 can use the mbedTLS library
+        (https://tls.mbed.org) for cryptographic operations.
+        One of the cryptographic libraries is required.
+
+        Configure will attempt to locate mbedTLS in the
+        default location.
+
+        If your installation of mbedTLS is in another
+        location, specify it using --with-libmbedtls-prefix.
+
+ * --with-libz
+ * --without-libz
+ * --with-libz-prefix=[DIR]
+
+	If present, libssh2 will attempt to use the zlib
+	(http://www.zlib.org) for payload compression, however
+	zlib is not required.
+
+	If your installation of Libz is in another location,
+	specify it using --with-libz-prefix.
+
+ * --enable-debug
+
+	Will make the build use more pedantic and strict compiler
+	options as well as enable the libssh2_trace() function (for
+	showing debug traces).

docs/INSTALL_CMAKE

@@ -0,0 +1,179 @@
+License: see COPYING
+
+Source code: https://github.com/libssh2/libssh2
+
+Web site source code: https://github.com/libssh2/www
+
+Installation instructions are in docs/INSTALL
+=======
+To build libssh2 you will need CMake v2.8 or later [1] and one of the
+following cryptography libraries:
+
+* OpenSSL
+* Libgcrypt
+* WinCNG
+* mbedTLS
+
+Getting started
+---------------
+
+If you are happy with the default options, make a new build directory,
+change to it, configure the build environment and build the project:
+
+  mkdir bin
+  cd bin
+  cmake ..
+  cmake --build .
+
+libssh2 will be built as a static library and will use any
+cryptography library available.  The library binary will be put in
+`bin/src`, with the examples in `bin/example` and the tests in
+`bin/tests`.
+
+Customising the build
+---------------------
+
+Of course, you might want to customise the build options.  You can
+pass the options to CMake on the command line:
+
+  cmake -D<option>=<value> ..
+
+The following options are available:
+
+ * `BUILD_SHARED_LIBS=OFF`
+
+    Determines whether libssh2 is built as a static library or as a
+    shared library (.dll/.so).  Can be `ON` or `OFF`.
+
+ * `CRYPTO_BACKEND=`
+
+    Chooses a specific cryptography library to use for cryptographic
+    operations.  Can be `OpenSSL` (https://www.openssl.org),
+    `Libgcrypt` (https://www.gnupg.org/), `WinCNG` (Windows Vista+),
+    `mbedTLS` (https://tls.mbed.org/) or blank to use any library available.
+
+    CMake will attempt to locate the libraries automatically.  See [2]
+    for more information.
+
+ * `ENABLE_ZLIB_COMPRESSION=OFF`
+
+    Will use zlib (http://www.zlib.org) for payload compression.  Can
+    be `ON` or `OFF`.
+
+ * `ENABLE_CRYPT_NONE=OFF`
+
+    The SSH2 Transport allows for unencrypted data transmission using
+    the "none" cipher.  Because this is such a huge security hole, it
+    is typically disabled on SSH2 implementations and is disabled in
+    libssh2 by default as well.
+
+    Enabling this option will allow for "none" as a negotiable method,
+    however it still requires that the method be advertized by the
+    remote end and that no more-preferable methods are available.
+
+ * `ENABLE_MAC_NONE=OFF`
+
+    The SSH2 Transport also allows implementations to forego a message
+    authentication code.  While this is less of a security risk than
+    using a "none" cipher, it is still not recommended as disabling
+    MAC hashes removes a layer of security.
+
+    Enabling this option will allow for "none" as a negotiable method,
+    however it still requires that the method be advertized by the
+    remote end and that no more-preferable methods are available.
+
+ * `ENABLE_GEX_NEW=ON`
+
+    The diffie-hellman-group-exchange-sha1 (dh-gex) key exchange
+    method originally defined an exchange negotiation using packet
+    type 30 to request a generation pair based on a single target
+    value.  Later refinement of dh-gex provided for range and target
+    values.  By default libssh2 will use the newer range method.
+
+    If you experience trouble connecting to an old SSH server using
+    dh-gex, try this option to fallback on the older more reliable
+    method.
+
+ * `ENABLE_DEBUG_LOGGING=ON` in Debug, `=OFF` in Release
+
+    Will enable the libssh2_trace() function for showing debug traces.
+
+ * `CLEAR_MEMORY=ON`
+
+    Securely zero memory before freeing it (if the backend supports this).
+
+Build tools
+-----------
+
+The previous examples used CMake to start the build using:
+
+  cmake --build .
+
+Alternatively, once CMake has configured your project, you can just
+use your own build tool, e.g GNU make, Visual Studio, etc., from that
+point onwards.
+
+Tests
+-----
+
+To test the build, run the appropriate test target for your build
+system.  For example:
+
+  cmake --build . --target test
+or
+  cmake --build . --target RUN_TESTS
+
+How do I use libssh2 in my project if my project doesn't use CMake?
+-------------------------------------------------------------------
+
+If you are not using CMake for your own project, install libssh2
+
+  cmake <libssh2 source location>
+  cmake --build .
+  cmake --build . --target install
+or
+  cmake --build . --target INSTALL
+
+and then specify the install location to your project in the normal
+way for your build environment.  If you don't like the default install
+location, add `-DCMAKE_INSTALL_PREFIX=<chosen prefix>` when initially
+configuring the project.
+
+How can I use libssh2 in my project if it also uses CMake?
+----------------------------------------------------------
+
+If your own project also uses CMake, you don't need to worry about
+setting it up with libssh2's location.  Just add just the following
+lines and CMake will find libssh2 on your system, set up the necessary
+paths and link the library with your binary.
+
+    find_package(Libssh2 REQUIRED CONFIG)
+    target_link_libraries(my_project_target Libssh2::libssh2)
+
+Of course, you still have to make libssh2 available on your system
+first.  You can install it in the traditional way shown above, but you
+don't have to.  Instead you can just build it, which will export its
+location to the user package registry [3] where `find_package` will
+find it.
+
+You can even combine the two steps using a so-called 'superbuild'
+project [4] that downloads, builds and exports libssh2, and then
+builds your project:
+
+    include(ExternalProject)
+
+    ExternalProject_Add(
+        Libssh2
+        URL <libssh2 download location>
+        URL_HASH SHA1=<libssh2 archive SHA1>
+        INSTALL_COMMAND "")
+
+    ExternalProject_Add(
+        MyProject DEPENDS Libssh2
+        SOURCE_DIR ${CMAKE_CURRENT_SOURCE_DIR}/src
+        INSTALL_COMMAND "")
+
+[1] https://www.cmake.org/cmake/resources/software.html
+[2] https://www.cmake.org/cmake/help/v3.0/manual/cmake-packages.7.html
+[3] https://www.cmake.org/cmake/help/v3.0/manual/cmake-packages.7.html#package-registry
+[4] http://www.kitware.com/media/html/BuildingExternalProjectsWithCMake2.8.html

docs/Makefile.am

@@ -1,6 +1,7 @@
 # $Id: Makefile.am,v 1.37 2009/03/26 15:41:15 bagder Exp $
 
-EXTRA_DIST = template.3
+EXTRA_DIST = template.3 BINDINGS INSTALL_AUTOTOOLS INSTALL_CMAKE HACKING TODO	\
+ AUTHORS CMakeLists.txt HACKING.CRYPTO SECURITY.md
 
 dist_man_MANS = \
 	libssh2_agent_connect.3 \
@@ -88,6 +89,7 @@ dist_man_MANS = \
 	libssh2_publickey_remove_ex.3 \
 	libssh2_publickey_shutdown.3 \
 	libssh2_scp_recv.3 \
+	libssh2_scp_recv2.3 \
 	libssh2_scp_send.3 \
 	libssh2_scp_send64.3 \
 	libssh2_scp_send_ex.3 \
@@ -102,11 +104,13 @@ dist_man_MANS = \
 	libssh2_session_free.3 \
 	libssh2_session_get_blocking.3 \
 	libssh2_session_get_timeout.3 \
+	libssh2_session_handshake.3 \
 	libssh2_session_hostkey.3 \
 	libssh2_session_init.3 \
 	libssh2_session_init_ex.3 \
 	libssh2_session_last_errno.3 \
 	libssh2_session_last_error.3 \
+	libssh2_session_set_last_error.3 \
 	libssh2_session_method_pref.3 \
 	libssh2_session_methods.3 \
 	libssh2_session_set_blocking.3 \
@@ -120,6 +124,7 @@ dist_man_MANS = \
 	libssh2_sftp_fstat.3 \
 	libssh2_sftp_fstat_ex.3 \
 	libssh2_sftp_fstatvfs.3 \
+	libssh2_sftp_fsync.3 \
 	libssh2_sftp_get_channel.3 \
 	libssh2_sftp_init.3 \
 	libssh2_sftp_last_error.3 \
@@ -166,4 +171,5 @@ dist_man_MANS = \
 	libssh2_userauth_publickey.3 \
 	libssh2_userauth_publickey_fromfile.3 \
 	libssh2_userauth_publickey_fromfile_ex.3 \
+	libssh2_userauth_publickey_frommemory.3 \
 	libssh2_version.3

docs/Makefile.in

@@ -1,8 +1,8 @@
-# Makefile.in generated by automake 1.9.6 from Makefile.am.
+# Makefile.in generated by automake 1.16.1 from Makefile.am.
 # @configure_input@
 
-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005  Free Software Foundation, Inc.
+# Copyright (C) 1994-2018 Free Software Foundation, Inc.
+
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -15,15 +15,67 @@
 @SET_MAKE@
 
 # $Id: Makefile.am,v 1.37 2009/03/26 15:41:15 bagder Exp $
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
 VPATH = @srcdir@
+am__is_gnu_make = { \
+  if test -z '$(MAKELEVEL)'; then \
+    false; \
+  elif test -n '$(MAKE_HOST)'; then \
+    true; \
+  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
+    true; \
+  else \
+    false; \
+  fi; \
+}
+am__make_running_with_option = \
+  case $${target_option-} in \
+      ?) ;; \
+      *) echo "am__make_running_with_option: internal error: invalid" \
+              "target option '$${target_option-}' specified" >&2; \
+         exit 1;; \
+  esac; \
+  has_opt=no; \
+  sane_makeflags=$$MAKEFLAGS; \
+  if $(am__is_gnu_make); then \
+    sane_makeflags=$$MFLAGS; \
+  else \
+    case $$MAKEFLAGS in \
+      *\\[\ \	]*) \
+        bs=\\; \
+        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
+          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
+    esac; \
+  fi; \
+  skip_next=no; \
+  strip_trailopt () \
+  { \
+    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+  }; \
+  for flg in $$sane_makeflags; do \
+    test $$skip_next = yes && { skip_next=no; continue; }; \
+    case $$flg in \
+      *=*|--*) continue;; \
+        -*I) strip_trailopt 'I'; skip_next=yes;; \
+      -*I?*) strip_trailopt 'I';; \
+        -*O) strip_trailopt 'O'; skip_next=yes;; \
+      -*O?*) strip_trailopt 'O';; \
+        -*l) strip_trailopt 'l'; skip_next=yes;; \
+      -*l?*) strip_trailopt 'l';; \
+      -[dEDm]) skip_next=yes;; \
+      -[JT]) skip_next=yes;; \
+    esac; \
+    case $$flg in \
+      *$$target_option*) has_opt=yes; break;; \
+    esac; \
+  done; \
+  test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
 pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
-top_builddir = ..
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-INSTALL = @INSTALL@
 install_sh_DATA = $(install_sh) -c -m 644
 install_sh_PROGRAM = $(install_sh) -c
 install_sh_SCRIPT = $(install_sh) -c
@@ -38,8 +90,6 @@ POST_UNINSTALL = :
 build_triplet = @build@
 host_triplet = @host@
 subdir = docs
-DIST_COMMON = $(dist_man_MANS) $(srcdir)/Makefile.am \
-	$(srcdir)/Makefile.in
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
 am__aclocal_m4_deps = $(top_srcdir)/m4/autobuild.m4 \
 	$(top_srcdir)/m4/lib-ld.m4 $(top_srcdir)/m4/lib-link.m4 \
@@ -49,30 +99,75 @@ am__aclocal_m4_deps = $(top_srcdir)/m4/autobuild.m4 \
 	$(top_srcdir)/acinclude.m4 $(top_srcdir)/configure.ac
 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 	$(ACLOCAL_M4)
+DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
 mkinstalldirs = $(install_sh) -d
 CONFIG_HEADER = $(top_builddir)/src/libssh2_config.h \
 	$(top_builddir)/example/libssh2_config.h
 CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
+AM_V_P = $(am__v_P_@AM_V@)
+am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
+am__v_P_0 = false
+am__v_P_1 = :
+AM_V_GEN = $(am__v_GEN_@AM_V@)
+am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
+am__v_GEN_0 = @echo "  GEN     " $@;
+am__v_GEN_1 = 
+AM_V_at = $(am__v_at_@AM_V@)
+am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
+am__v_at_0 = @
+am__v_at_1 = 
 SOURCES =
 DIST_SOURCES =
+am__can_run_installinfo = \
+  case $$AM_UPDATE_INFO_DIR in \
+    n|no|NO) false;; \
+    *) (install-info --version) >/dev/null 2>&1;; \
+  esac
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+    *) f=$$p;; \
+  esac;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+  for p in $$list; do echo "$$p $$p"; done | \
+  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+    if (++n[$$2] == $(am__install_max)) \
+      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+    END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+am__uninstall_files_from_dir = { \
+  test -z "$$files" \
+    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
+    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
+         $(am__cd) "$$dir" && rm -f $$files; }; \
+  }
 man3dir = $(mandir)/man3
 am__installdirs = "$(DESTDIR)$(man3dir)"
 NROFF = nroff
 MANS = $(dist_man_MANS)
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
+am__DIST_COMMON = $(dist_man_MANS) $(srcdir)/Makefile.in AUTHORS TODO
 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
 ACLOCAL = @ACLOCAL@
 ALLOCA = @ALLOCA@
-AMDEP_FALSE = @AMDEP_FALSE@
-AMDEP_TRUE = @AMDEP_TRUE@
 AMTAR = @AMTAR@
+AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
 AR = @AR@
 AS = @AS@
 AUTOCONF = @AUTOCONF@
 AUTOHEADER = @AUTOHEADER@
 AUTOMAKE = @AUTOMAKE@
 AWK = @AWK@
-BUILD_EXAMPLES_FALSE = @BUILD_EXAMPLES_FALSE@
-BUILD_EXAMPLES_TRUE = @BUILD_EXAMPLES_TRUE@
 CC = @CC@
 CCDEPMODE = @CCDEPMODE@
 CFLAGS = @CFLAGS@
@@ -91,21 +186,27 @@ EGREP = @EGREP@
 EXEEXT = @EXEEXT@
 FGREP = @FGREP@
 GREP = @GREP@
+HAVE_LIBBCRYPT = @HAVE_LIBBCRYPT@
+HAVE_LIBCRYPT32 = @HAVE_LIBCRYPT32@
 HAVE_LIBGCRYPT = @HAVE_LIBGCRYPT@
+HAVE_LIBMBEDTLS = @HAVE_LIBMBEDTLS@
 HAVE_LIBSSL = @HAVE_LIBSSL@
 HAVE_LIBZ = @HAVE_LIBZ@
-HAVE_SYS_UN_H_FALSE = @HAVE_SYS_UN_H_FALSE@
-HAVE_SYS_UN_H_TRUE = @HAVE_SYS_UN_H_TRUE@
+INSTALL = @INSTALL@
 INSTALL_DATA = @INSTALL_DATA@
 INSTALL_PROGRAM = @INSTALL_PROGRAM@
 INSTALL_SCRIPT = @INSTALL_SCRIPT@
 INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
 LD = @LD@
 LDFLAGS = @LDFLAGS@
+LIBBCRYPT = @LIBBCRYPT@
+LIBBCRYPT_PREFIX = @LIBBCRYPT_PREFIX@
+LIBCRYPT32 = @LIBCRYPT32@
+LIBCRYPT32_PREFIX = @LIBCRYPT32_PREFIX@
 LIBGCRYPT = @LIBGCRYPT@
-LIBGCRYPT_FALSE = @LIBGCRYPT_FALSE@
 LIBGCRYPT_PREFIX = @LIBGCRYPT_PREFIX@
-LIBGCRYPT_TRUE = @LIBGCRYPT_TRUE@
+LIBMBEDTLS = @LIBMBEDTLS@
+LIBMBEDTLS_PREFIX = @LIBMBEDTLS_PREFIX@
 LIBOBJS = @LIBOBJS@
 LIBS = @LIBS@
 LIBSREQUIRED = @LIBSREQUIRED@
@@ -117,15 +218,18 @@ LIBZ = @LIBZ@
 LIBZ_PREFIX = @LIBZ_PREFIX@
 LIPO = @LIPO@
 LN_S = @LN_S@
+LTLIBBCRYPT = @LTLIBBCRYPT@
+LTLIBCRYPT32 = @LTLIBCRYPT32@
 LTLIBGCRYPT = @LTLIBGCRYPT@
+LTLIBMBEDTLS = @LTLIBMBEDTLS@
 LTLIBOBJS = @LTLIBOBJS@
 LTLIBSSL = @LTLIBSSL@
 LTLIBZ = @LTLIBZ@
+LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
 MAINT = @MAINT@
-MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@
-MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@
 MAKEINFO = @MAKEINFO@
 MANIFEST_TOOL = @MANIFEST_TOOL@
+MKDIR_P = @MKDIR_P@
 NM = @NM@
 NMEDIT = @NMEDIT@
 OBJDUMP = @OBJDUMP@
@@ -145,15 +249,15 @@ SED = @SED@
 SET_MAKE = @SET_MAKE@
 SHELL = @SHELL@
 SSHD = @SSHD@
-SSHD_FALSE = @SSHD_FALSE@
-SSHD_TRUE = @SSHD_TRUE@
 STRIP = @STRIP@
 VERSION = @VERSION@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
 ac_ct_AR = @ac_ct_AR@
 ac_ct_CC = @ac_ct_CC@
 ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
-am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
-am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
 am__include = @am__include@
 am__leading_dot = @am__leading_dot@
 am__quote = @am__quote@
@@ -165,6 +269,7 @@ build_alias = @build_alias@
 build_cpu = @build_cpu@
 build_os = @build_os@
 build_vendor = @build_vendor@
+builddir = @builddir@
 datadir = @datadir@
 datarootdir = @datarootdir@
 docdir = @docdir@
@@ -190,11 +295,18 @@ pdfdir = @pdfdir@
 prefix = @prefix@
 program_transform_name = @program_transform_name@
 psdir = @psdir@
+runstatedir = @runstatedir@
 sbindir = @sbindir@
 sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
 sysconfdir = @sysconfdir@
 target_alias = @target_alias@
-EXTRA_DIST = template.3
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+EXTRA_DIST = template.3 BINDINGS INSTALL_AUTOTOOLS INSTALL_CMAKE HACKING TODO	\
+ AUTHORS CMakeLists.txt HACKING.CRYPTO SECURITY.md
+
 dist_man_MANS = \
 	libssh2_agent_connect.3 \
 	libssh2_agent_disconnect.3 \
@@ -281,6 +393,7 @@ dist_man_MANS = \
 	libssh2_publickey_remove_ex.3 \
 	libssh2_publickey_shutdown.3 \
 	libssh2_scp_recv.3 \
+	libssh2_scp_recv2.3 \
 	libssh2_scp_send.3 \
 	libssh2_scp_send64.3 \
 	libssh2_scp_send_ex.3 \
@@ -295,11 +408,13 @@ dist_man_MANS = \
 	libssh2_session_free.3 \
 	libssh2_session_get_blocking.3 \
 	libssh2_session_get_timeout.3 \
+	libssh2_session_handshake.3 \
 	libssh2_session_hostkey.3 \
 	libssh2_session_init.3 \
 	libssh2_session_init_ex.3 \
 	libssh2_session_last_errno.3 \
 	libssh2_session_last_error.3 \
+	libssh2_session_set_last_error.3 \
 	libssh2_session_method_pref.3 \
 	libssh2_session_methods.3 \
 	libssh2_session_set_blocking.3 \
@@ -313,6 +428,7 @@ dist_man_MANS = \
 	libssh2_sftp_fstat.3 \
 	libssh2_sftp_fstat_ex.3 \
 	libssh2_sftp_fstatvfs.3 \
+	libssh2_sftp_fsync.3 \
 	libssh2_sftp_get_channel.3 \
 	libssh2_sftp_init.3 \
 	libssh2_sftp_last_error.3 \
@@ -359,6 +475,7 @@ dist_man_MANS = \
 	libssh2_userauth_publickey.3 \
 	libssh2_userauth_publickey_fromfile.3 \
 	libssh2_userauth_publickey_fromfile_ex.3 \
+	libssh2_userauth_publickey_frommemory.3 \
 	libssh2_version.3
 
 all: all-am
@@ -368,22 +485,21 @@ $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__confi
 	@for dep in $?; do \
 	  case '$(am__configure_deps)' in \
 	    *$$dep*) \
-	      cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
-		&& exit 0; \
+	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+	        && { if test -f $@; then exit 0; else break; fi; }; \
 	      exit 1;; \
 	  esac; \
 	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  docs/Makefile'; \
-	cd $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign  docs/Makefile
-.PRECIOUS: Makefile
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign docs/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign docs/Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
 	  *config.status*) \
 	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
 	  *) \
-	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
-	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles);; \
 	esac;
 
 $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
@@ -393,92 +509,93 @@ $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
 
 mostlyclean-libtool:
 	-rm -f *.lo
 
 clean-libtool:
 	-rm -rf .libs _libs
-
-distclean-libtool:
-	-rm -f libtool
-uninstall-info-am:
-install-man3: $(man3_MANS) $(man_MANS)
+install-man3: $(dist_man_MANS)
 	@$(NORMAL_INSTALL)
-	test -z "$(man3dir)" || $(mkdir_p) "$(DESTDIR)$(man3dir)"
-	@list='$(man3_MANS) $(dist_man3_MANS) $(nodist_man3_MANS)'; \
-	l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
-	for i in $$l2; do \
-	  case "$$i" in \
-	    *.3*) list="$$list $$i" ;; \
-	  esac; \
+	@list1=''; \
+	list2='$(dist_man_MANS)'; \
+	test -n "$(man3dir)" \
+	  && test -n "`echo $$list1$$list2`" \
+	  || exit 0; \
+	echo " $(MKDIR_P) '$(DESTDIR)$(man3dir)'"; \
+	$(MKDIR_P) "$(DESTDIR)$(man3dir)" || exit 1; \
+	{ for i in $$list1; do echo "$$i"; done;  \
+	if test -n "$$list2"; then \
+	  for i in $$list2; do echo "$$i"; done \
+	    | sed -n '/\.3[a-z]*$$/p'; \
+	fi; \
+	} | while read p; do \
+	  if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
+	  echo "$$d$$p"; echo "$$p"; \
+	done | \
+	sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^3][0-9a-z]*$$,3,;x' \
+	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
+	sed 'N;N;s,\n, ,g' | { \
+	list=; while read file base inst; do \
+	  if test "$$base" = "$$inst"; then list="$$list $$file"; else \
+	    echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man3dir)/$$inst'"; \
+	    $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man3dir)/$$inst" || exit $$?; \
+	  fi; \
 	done; \
-	for i in $$list; do \
-	  if test -f $(srcdir)/$$i; then file=$(srcdir)/$$i; \
-	  else file=$$i; fi; \
-	  ext=`echo $$i | sed -e 's/^.*\\.//'`; \
-	  case "$$ext" in \
-	    3*) ;; \
-	    *) ext='3' ;; \
-	  esac; \
-	  inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
-	  inst=`echo $$inst | sed -e 's/^.*\///'`; \
-	  inst=`echo $$inst | sed '$(transform)'`.$$ext; \
-	  echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man3dir)/$$inst'"; \
-	  $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man3dir)/$$inst"; \
-	done
+	for i in $$list; do echo "$$i"; done | $(am__base_list) | \
+	while read files; do \
+	  test -z "$$files" || { \
+	    echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man3dir)'"; \
+	    $(INSTALL_DATA) $$files "$(DESTDIR)$(man3dir)" || exit $$?; }; \
+	done; }
+
 uninstall-man3:
 	@$(NORMAL_UNINSTALL)
-	@list='$(man3_MANS) $(dist_man3_MANS) $(nodist_man3_MANS)'; \
-	l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
-	for i in $$l2; do \
-	  case "$$i" in \
-	    *.3*) list="$$list $$i" ;; \
-	  esac; \
-	done; \
-	for i in $$list; do \
-	  ext=`echo $$i | sed -e 's/^.*\\.//'`; \
-	  case "$$ext" in \
-	    3*) ;; \
-	    *) ext='3' ;; \
-	  esac; \
-	  inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
-	  inst=`echo $$inst | sed -e 's/^.*\///'`; \
-	  inst=`echo $$inst | sed '$(transform)'`.$$ext; \
-	  echo " rm -f '$(DESTDIR)$(man3dir)/$$inst'"; \
-	  rm -f "$(DESTDIR)$(man3dir)/$$inst"; \
-	done
-tags: TAGS
-TAGS:
+	@list=''; test -n "$(man3dir)" || exit 0; \
+	files=`{ for i in $$list; do echo "$$i"; done; \
+	l2='$(dist_man_MANS)'; for i in $$l2; do echo "$$i"; done | \
+	  sed -n '/\.3[a-z]*$$/p'; \
+	} | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^3][0-9a-z]*$$,3,;x' \
+	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
+	dir='$(DESTDIR)$(man3dir)'; $(am__uninstall_files_from_dir)
+tags TAGS:
 
-ctags: CTAGS
-CTAGS:
+ctags CTAGS:
+
+cscope cscopelist:
 
 
-distdir: $(DISTFILES)
-	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
-	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
-	list='$(DISTFILES)'; for file in $$list; do \
-	  case $$file in \
-	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
-	    $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
-	  esac; \
+distdir: $(BUILT_SOURCES)
+	$(MAKE) $(AM_MAKEFLAGS) distdir-am
+
+distdir-am: $(DISTFILES)
+	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	list='$(DISTFILES)'; \
+	  dist_files=`for file in $$list; do echo $$file; done | \
+	  sed -e "s|^$$srcdirstrip/||;t" \
+	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+	case $$dist_files in \
+	  */*) $(MKDIR_P) `echo "$$dist_files" | \
+			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+			   sort -u` ;; \
+	esac; \
+	for file in $$dist_files; do \
 	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
-	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
-	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
-	    dir="/$$dir"; \
-	    $(mkdir_p) "$(distdir)$$dir"; \
-	  else \
-	    dir=''; \
-	  fi; \
 	  if test -d $$d/$$file; then \
-	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 	    fi; \
-	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
 	  else \
-	    test -f $(distdir)/$$file \
-	    || cp -p $$d/$$file $(distdir)/$$file \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
 	    || exit 1; \
 	  fi; \
 	done
@@ -487,7 +604,7 @@ check: check-am
 all-am: Makefile $(MANS)
 installdirs:
 	for dir in "$(DESTDIR)$(man3dir)"; do \
-	  test -z "$$dir" || $(mkdir_p) "$$dir"; \
+	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
 	done
 install: install-am
 install-exec: install-exec-am
@@ -499,16 +616,22 @@ install-am: all-am
 
 installcheck: installcheck-am
 install-strip:
-	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	  `test -z '$(STRIP)' || \
-	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+	if test -z '$(STRIP)'; then \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	      install; \
+	else \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+	fi
 mostlyclean-generic:
 
 clean-generic:
 
 distclean-generic:
 	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
 
 maintainer-clean-generic:
 	@echo "This command is intended for maintainers to use"
@@ -519,7 +642,7 @@ clean-am: clean-generic clean-libtool mostlyclean-am
 
 distclean: distclean-am
 	-rm -f Makefile
-distclean-am: clean-am distclean-generic distclean-libtool
+distclean-am: clean-am distclean-generic
 
 dvi: dvi-am
 
@@ -527,18 +650,38 @@ dvi-am:
 
 html: html-am
 
+html-am:
+
 info: info-am
 
 info-am:
 
 install-data-am: install-man
 
+install-dvi: install-dvi-am
+
+install-dvi-am:
+
 install-exec-am:
 
+install-html: install-html-am
+
+install-html-am:
+
 install-info: install-info-am
 
+install-info-am:
+
 install-man: install-man3
 
+install-pdf: install-pdf-am
+
+install-pdf-am:
+
+install-ps: install-ps-am
+
+install-ps-am:
+
 installcheck-am:
 
 maintainer-clean: maintainer-clean-am
@@ -557,21 +700,28 @@ ps: ps-am
 
 ps-am:
 
-uninstall-am: uninstall-info-am uninstall-man
+uninstall-am: uninstall-man
 
 uninstall-man: uninstall-man3
 
+.MAKE: install-am install-strip
+
 .PHONY: all all-am check check-am clean clean-generic clean-libtool \
-	distclean distclean-generic distclean-libtool distdir dvi \
-	dvi-am html html-am info info-am install install-am \
-	install-data install-data-am install-exec install-exec-am \
-	install-info install-info-am install-man install-man3 \
-	install-strip installcheck installcheck-am installdirs \
-	maintainer-clean maintainer-clean-generic mostlyclean \
-	mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
-	uninstall uninstall-am uninstall-info-am uninstall-man \
+	cscopelist-am ctags-am distclean distclean-generic \
+	distclean-libtool distdir dvi dvi-am html html-am info info-am \
+	install install-am install-data install-data-am install-dvi \
+	install-dvi-am install-exec install-exec-am install-html \
+	install-html-am install-info install-info-am install-man \
+	install-man3 install-pdf install-pdf-am install-ps \
+	install-ps-am install-strip installcheck installcheck-am \
+	installdirs maintainer-clean maintainer-clean-generic \
+	mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \
+	ps ps-am tags-am uninstall uninstall-am uninstall-man \
 	uninstall-man3
 
+.PRECIOUS: Makefile
+
+
 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.
 .NOEXPORT:

docs/SECURITY.md

@@ -0,0 +1,100 @@
+libssh2 security
+================
+
+This document is intended to provide guidance on how security vulnerabilities
+should be handled in the libssh2 project.
+
+Publishing Information
+----------------------
+
+All known and public libssh2 vulnerabilities will be listed on [the libssh2
+web site](https://www.libssh2.org/).
+
+Security vulnerabilities should not be entered in the project's public bug
+tracker unless the necessary configuration is in place to limit access to the
+issue to only the reporter and the project's security team.
+
+Vulnerability Handling
+----------------------
+
+The typical process for handling a new security vulnerability is as follows.
+
+No information should be made public about a vulnerability until it is
+formally announced at the end of this process. That means, for example that a
+bug tracker entry must NOT be created to track the issue since that will make
+the issue public and it should not be discussed on the project's public
+mailing list. Also messages associated with any commits should not make any
+reference to the security nature of the commit if done prior to the public
+announcement.
+
+- The person discovering the issue, the reporter, reports the vulnerability
+  privately to `libssh2-security@haxx.se`. That's an email alias that reaches a
+  handful of selected and trusted people.
+
+- Messages that do not relate to the reporting or managing of an undisclosed
+  security vulnerability in libssh2 are ignored and no further action is
+  required.
+
+- A person in the security team sends an e-mail to the original reporter to
+  acknowledge the report.
+
+- The security team investigates the report and either rejects it or accepts
+  it.
+
+- If the report is rejected, the team writes to the reporter to explain why.
+
+- If the report is accepted, the team writes to the reporter to let him/her
+  know it is accepted and that they are working on a fix.
+
+- The security team discusses the problem, works out a fix, considers the
+  impact of the problem and suggests a release schedule. This discussion
+  should involve the reporter as much as possible.
+
+- The release of the information should be "as soon as possible" and is most
+  often synced with an upcoming release that contains the fix. If the
+  reporter, or anyone else, thinks the next planned release is too far away
+  then a separate earlier release for security reasons should be considered.
+
+- Write a security advisory draft about the problem that explains what the
+  problem is, its impact, which versions it affects, solutions or
+  workarounds, when the release is out and make sure to credit all
+  contributors properly.
+
+- Request a CVE number from
+  [distros@openwall](http://oss-security.openwall.org/wiki/mailing-lists/distros)
+  when also informing and preparing them for the upcoming public security
+  vulnerability announcement - attach the advisory draft for information. Note
+  that 'distros' won't accept an embargo longer than 19 days.
+
+- Update the "security advisory" with the CVE number.
+
+- The security team commits the fix in a private branch. The commit message
+  should ideally contain the CVE number. This fix is usually also distributed
+  to the 'distros' mailing list to allow them to use the fix prior to the
+  public announcement.
+
+- At the day of the next release, the private branch is merged into the master
+  branch and pushed. Once pushed, the information is accessible to the public
+  and the actual release should follow suit immediately afterwards.
+
+- The project team creates a release that includes the fix.
+
+- The project team announces the release and the vulnerability to the world in
+  the same manner we always announce releases. It gets sent to the libssh2
+  mailing list and the oss-security mailing list.
+
+- The security web page on the web site should get the new vulnerability
+  mentioned.
+
+LIBSSH2-SECURITY (at haxx dot se)
+--------------------------------
+
+Who is on this list? There are a couple of criteria you must meet, and then we
+might ask you to join the list or you can ask to join it. It really isn't very
+formal. We basically only require that you have a long-term presence in the
+libssh2 project and you have shown an understanding for the project and its way
+of working. You must've been around for a good while and you should have no
+plans in vanishing in the near future.
+
+We do not make the list of partipants public mostly because it tends to vary
+somewhat over time and a list somewhere will only risk getting outdated.

docs/libssh2_banner_set.3

@@ -1,6 +1,6 @@
 .TH libssh2_banner_set 3 "1 Jun 2007" "libssh2 0.15" "libssh2 manual"
 .SH NAME
-libssh2_banner_set - set the SSH prococol banner for the local client
+libssh2_banner_set - set the SSH protocol banner for the local client
 .SH SYNOPSIS
 #include <libssh2.h>
 

docs/libssh2_base64_decode.3

@@ -19,7 +19,7 @@ The returned buffer is allocated by this function, but it is not clear how to
 free that memory!
 .SH BUGS
 The memory that *dest points to is allocated by the malloc function libssh2
-uses, but there's no way for an appliction to free this data in a safe and
+uses, but there's no way for an application to free this data in a safe and
 reliable way!
 .SH RETURN VALUE
 0 if successful, \-1 if any error occurred.

docs/libssh2_channel_get_exit_status.3

@@ -8,7 +8,7 @@ int
 libssh2_channel_get_exit_status(LIBSSH2_CHANNEL* channel)
 
 .SH DESCRIPTION
-\fIchannel\fP - Closed channel stream to retreive exit status from.
+\fIchannel\fP - Closed channel stream to retrieve exit status from.
 
 Returns the exit code raised by the process running on the remote host at 
 the other end of the named channel. Note that the exit status may not be 

docs/libssh2_channel_window_write.3

@@ -4,7 +4,7 @@ libssh2_channel_window_write - convenience macro for \fIlibssh2_channel_window_w
 .SH SYNOPSIS
 #include <libssh2.h>
 
-unsigend long libssh2_channel_window_write(LIBSSH2_CHANNEL *channel);
+unsigned long libssh2_channel_window_write(LIBSSH2_CHANNEL *channel);
 
 .SH DESCRIPTION
 This is a macro defined in a public libssh2 header file that is using the

docs/libssh2_channel_window_write_ex.3

@@ -9,11 +9,11 @@ libssh2_channel_window_write_ex(LIBSSH2_CHANNEL *channel,
                                 unsigned long *window_size_initial)
 .SH DESCRIPTION
 Check the status of the write window Returns the number of bytes which may be
-safely writen on the channel without blocking. 'window_size_initial' (if
+safely written on the channel without blocking. 'window_size_initial' (if
 passed) will be populated with the size of the initial window as defined by
 the channel_open request
 .SH RETURN VALUE
-Number of bytes which may be safely writen on the channel without blocking.
+Number of bytes which may be safely written on the channel without blocking.
 .SH ERRORS
 
 .SH SEE ALSO

docs/libssh2_hostkey_hash.3

@@ -18,8 +18,9 @@ Returns the computed digest of the remote system's hostkey. The length of
 the returned string is hash_type specific (e.g. 16 bytes for MD5, 
 20 bytes for SHA1).
 .SH RETURN VALUE
-Computed hostkey hash value. or NULL if the session has not yet been started 
-up. (The hash consists of raw binary bytes, not hex digits, so is not 
-directly printable.)
+Computed hostkey hash value, or NULL if the information is not available
+(either the session has not yet been started up, or the requested hash
+algorithm was not available). The hash consists of raw binary bytes, not hex
+digits, so it is not directly printable.
 .SH SEE ALSO
 .BR libssh2_session_init_ex(3)

docs/libssh2_knownhost_add.3

@@ -36,7 +36,7 @@ The salt has to be provided base64 encoded with a trailing zero byte.
 argument
 
 \fItypemask\fP is a bitmask that specifies format and info about the data
-passed to this function. Specificly, it details what format the host name is,
+passed to this function. Specifically, it details what format the host name is,
 what format the key is and what key type it is.
 
 The host name is given as one of the following types:

docs/libssh2_knownhost_addc.3

@@ -40,7 +40,7 @@ argument
 \fIcommentlen\fP is the total size in bytes of the comment pointed to by the \fIcomment\fP argument
 
 \fItypemask\fP is a bitmask that specifies format and info about the data
-passed to this function. Specificly, it details what format the host name is,
+passed to this function. Specifically, it details what format the host name is,
 what format the key is and what key type it is.
 
 The host name is given as one of the following types:

docs/libssh2_knownhost_check.3

@@ -25,7 +25,7 @@ IP numerical address of the host or the full name.
 argument
 
 \fItypemask\fP is a bitmask that specifies format and info about the data
-passed to this function. Specificly, it details what format the host name is,
+passed to this function. Specifically, it details what format the host name is,
 what format the key is and what key type it is.
 
 The host name is given as one of the following types:

docs/libssh2_knownhost_checkp.3

@@ -30,7 +30,7 @@ addition to the plain host name only check.
 argument
 
 \fItypemask\fP is a bitmask that specifies format and info about the data
-passed to this function. Specificly, it details what format the host name is,
+passed to this function. Specifically, it details what format the host name is,
 what format the key is and what key type it is.
 
 The host name is given as one of the following types:

docs/libssh2_poll.3

@@ -8,7 +8,7 @@ int libssh2_poll(LIBSSH2_POLLFD *fds, unsigned int nfds, long timeout);
 .SH DESCRIPTION
 This function is deprecated. Do note use. We encourage users to instead use
 the \fIpoll(3)\fP or \fIselect(3)\fP functions to check for socket activity or
-when specific sockets are ready to get recevied from or send to.
+when specific sockets are ready to get received from or send to.
 
 Poll for activity on a socket, channel, listener, or any combination of these
 three types. The calling semantics for this function generally match

docs/libssh2_scp_recv.3

@@ -8,6 +8,9 @@ LIBSSH2_CHANNEL *
 libssh2_scp_recv(LIBSSH2_SESSION *session, const char *path, struct stat *sb);
 
 .SH DESCRIPTION
+This function is \fBDEPRECATED\fP. Use \fIlibssh2_scp_recv2(3)\fP
+instead!
+
 \fIsession\fP - Session instance as returned by 
 .BR libssh2_session_init_ex(3)
 

docs/libssh2_scp_recv2.3

@@ -0,0 +1,32 @@
+.TH libssh2_scp_recv2 3 "29 Jun 2015" "libssh2 1.6.1" "libssh2 manual"
+.SH NAME
+libssh2_scp_recv2 - request a remote file via SCP
+.SH SYNOPSIS
+#include <libssh2.h>
+
+LIBSSH2_CHANNEL *
+libssh2_scp_recv2(LIBSSH2_SESSION *session, const char *path, struct_stat *sb);
+
+.SH DESCRIPTION
+\fIsession\fP - Session instance as returned by 
+.BR libssh2_session_init_ex(3)
+
+\fIpath\fP - Full path and filename of file to transfer. That is the remote
+file name.
+
+\fIsb\fP - Populated with remote file's size, mode, mtime, and atime
+
+Request a file from the remote host via SCP.
+.SH RETURN VALUE
+Pointer to a newly allocated LIBSSH2_CHANNEL instance, or NULL on errors.
+.SH ERRORS
+\fILIBSSH2_ERROR_ALLOC\fP -  An internal memory allocation call failed.
+
+\fILIBSSH2_ERROR_SCP_PROTOCOL\fP - 
+
+\fILIBSSH2_ERROR_EAGAIN\fP - Marked for non-blocking I/O but the call would
+block.
+.SH SEE ALSO
+.BR libssh2_session_init_ex(3)
+.BR libssh2_channel_open_ex(3)
+

docs/libssh2_session_abstract.3

@@ -17,7 +17,7 @@ de-referenced pointer, the internal storage of the session instance may be
 modified in place.
 
 .SH RETURN VALUE
-A pointer to session internal storage whos contents point to previously 
+A pointer to session internal storage who's contents point to previously
 provided abstract data.
 
 .SH SEE ALSO

docs/libssh2_session_banner_set.3

@@ -1,6 +1,6 @@
 .TH libssh2_session_banner_set 3 "9 Sep 2011" "libssh2 1.4.0" "libssh2 manual"
 .SH NAME
-libssh2_session_banner_set - set the SSH prococol banner for the local client
+libssh2_session_banner_set - set the SSH protocol banner for the local client
 .SH SYNOPSIS
 #include <libssh2.h>
 

docs/libssh2_session_disconnect_ex.3

@@ -18,7 +18,7 @@ libssh2_session_disconnect(LIBSSH2_SESSION *session, const char *description);
 
 \fIdescription\fP - Human readable reason for disconnection.
 
-\fIlang\fP - Localization string describing the langauge/encoding of the description provided.
+\fIlang\fP - Localization string describing the language/encoding of the description provided.
 
 Send a disconnect message to the remote host associated with \fIsession\fP, 
 along with a \fIreason\fP symbol and a verbose \fIdescription\fP.

docs/libssh2_session_handshake.3

@@ -0,0 +1,40 @@
+.TH libssh2_session_handshake 3 "7 Oct 2010" "libssh2 1.2.8" "libssh2 manual"
+.SH NAME
+libssh2_session_handshake - perform the SSH handshake
+.SH SYNOPSIS
+#include <libssh2.h>
+
+int
+libssh2_session_handshake(LIBSSH2_SESSION *session, libssh2_socket_t socket);
+.SH DESCRIPTION
+\fIsession\fP - Session instance as returned by
+.BR libssh2_session_init_ex(3)
+
+\fIsocket\fP - Connected socket descriptor. Typically a TCP connection
+though the protocol allows for any reliable transport and the library will
+attempt to use any berkeley socket.
+
+Begin transport layer protocol negotiation with the connected host.
+.SH RETURN VALUE
+Returns 0 on success, negative on failure.
+.SH ERRORS
+\fILIBSSH2_ERROR_SOCKET_NONE\fP - The socket is invalid.
+
+\fILIBSSH2_ERROR_BANNER_SEND\fP - Unable to send banner to remote host.
+
+\fILIBSSH2_ERROR_KEX_FAILURE\fP - >Encryption key exchange with the remote
+host failed.
+
+\fILIBSSH2_ERROR_SOCKET_SEND\fP - Unable to send data on socket.
+
+\fILIBSSH2_ERROR_SOCKET_DISCONNECT\fP - The socket was disconnected.
+
+\fILIBSSH2_ERROR_PROTO\fP - An invalid SSH protocol response was received on
+the socket.
+
+\fILIBSSH2_ERROR_EAGAIN\fP - Marked for non-blocking I/O but the call would block.
+.SH AVAILABILITY
+Added in 1.2.8
+.SH SEE ALSO
+.BR libssh2_session_free(3)
+.BR libssh2_session_init_ex(3)

docs/libssh2_session_last_errno.3

@@ -18,3 +18,4 @@ Numeric error code corresponding to the the Error Code constants.
 
 .SH SEE ALSO
 .BR libssh2_session_last_error(3)
+.BR libssh2_session_set_last_error(3)

docs/libssh2_session_last_error.3

@@ -29,3 +29,4 @@ Numeric error code corresponding to the the Error Code constants.
 
 .SH SEE ALSO
 .BR libssh2_session_last_errno(3)
+.BR libssh2_session_set_last_error(3)

docs/libssh2_session_method_pref.3

@@ -19,7 +19,7 @@ If a method is listed which is not supported by libssh2 it will be
 ignored and not sent to the remote host during protocol negotiation.
 
 Set preferred methods to be negotiated. These 
-preferrences must be set prior to calling 
+preferences must be set prior to calling
 .BR libssh2_session_handshake(3)
 as they are used during the protocol initiation phase.
 

docs/libssh2_session_set_last_error.3

@@ -0,0 +1,33 @@
+.TH libssh2_session_set_last_error 3 "26 Oct 2015" "libssh2 1.6.1" "libssh2 manual"
+.SH NAME
+libssh2_session_set_last_error - sets the internal error state
+.SH SYNOPSIS
+#include <libssh2.h>
+
+int
+libssh2_session_set_last_error(LIBSSH2_SESSION *session, int errcode, const char *errmsg)
+
+.SH DESCRIPTION
+\fIsession\fP - Session instance as returned by
+.BR libssh2_session_init_ex(3)
+
+\fIerrcode\fP - One of the error codes as defined in the public
+libssh2 header file.
+
+\fIerrmsg\fP - If not NULL, a copy of the given string is stored
+inside the session object as the error message.
+
+This function is provided for high level language wrappers
+(i.e. Python or Perl) and other libraries that may extend libssh2 with
+additional features while still relying on its error reporting
+mechanism.
+
+.SH RETURN VALUE
+Numeric error code corresponding to the the Error Code constants.
+
+.SH AVAILABILITY
+Added in 1.6.1
+
+.SH SEE ALSO
+.BR libssh2_session_last_error(3)
+.BR libssh2_session_last_errno(3)

docs/libssh2_session_supported_algs.3

@@ -12,7 +12,7 @@ int libssh2_session_supported_algs(LIBSSH2_SESSION* session,
 \fIsession\fP - An instance of initialized LIBSSH2_SESSION (the function will
 use its pointer to the memory allocation function).  \fImethod_type\fP - Method
 type. See .BR \fIlibssh2_session_method_pref(3)\fP.  \fIalgs\fP - Address of a
-pointer that will point to an array af returned algorithms
+pointer that will point to an array of returned algorithms
 
 Get a list of supported algorithms for the given \fImethod_type\fP. The
 method_type parameter is equivalent to method_type in
@@ -36,7 +36,7 @@ const char **algorithms;
 int rc, i;
 LIBSSH2_SESSION *session;
 
-/* initilize session */
+/* initialize session */
 session = libssh2_session_init();
 rc = libssh2_session_supported_algs(session,
                                     LIBSSH2_METHOD_CRYPT_CS,

docs/libssh2_sftp_close_handle.3

@@ -20,7 +20,7 @@ or \fBlibssh2_sftp_opendir(3)\fP (which is a macro).
 
 Close an active LIBSSH2_SFTP_HANDLE. Because files and directories share the
 same underlying storage mechanism these methods may be used
-interchangably. \fBlibssh2_sftp_close(3)\fP and \fBlibssh2_sftp_closedir(3)\fP
+interchangeably. \fBlibssh2_sftp_close(3)\fP and \fBlibssh2_sftp_closedir(3)\fP
 are macros for \fBlibssh2_sftp_close_handle(3)\fP.
 
 .SH RETURN VALUE

docs/libssh2_sftp_fstat_ex.3

@@ -10,7 +10,7 @@ int
 libssh2_sftp_fstat_ex(LIBSSH2_SFTP_HANDLE *handle,
                       LIBSSH2_SFTP_ATTRIBUTES *attrs, int setstat)
 
-#define libbssh2_sftp_fstat(handle, attrs) \\
+#define libssh2_sftp_fstat(handle, attrs) \\
     libssh2_sftp_fstat_ex((handle), (attrs), 0)
 #define libssh2_sftp_fsetstat(handle, attrs) \\
     libssh2_sftp_fstat_ex((handle), (attrs), 1)
@@ -60,7 +60,7 @@ most common ones are:
 
 To check for specific user permissions, the set of defines are in the
 pattern LIBSSH2_SFTP_S_I<action><who> where <action> is R, W or X for
-read, write and excutable and <who> is USR, GRP and OTH for user,
+read, write and executable and <who> is USR, GRP and OTH for user,
 group and other. So, you check for a user readable file, use the bit
 \fILIBSSH2_SFTP_S_IRUSR\fP while you want to see if it is executable
 for other, you use \fILIBSSH2_SFTP_S_IXOTH\fP and so on.

docs/libssh2_sftp_fsync.3

@@ -0,0 +1,39 @@
+.TH libssh2_sftp_fsync 3 "8 Apr 2013" "libssh2 1.4.4" "libssh2 manual"
+.SH NAME
+libssh2_sftp_fsync - synchronize file to disk
+.SH SYNOPSIS
+.nf
+#include <libssh2.h>
+#include <libssh2_sftp.h>
+
+int
+libssh2_sftp_fsync(LIBSSH2_SFTP_HANDLE *handle)
+.fi
+.SH DESCRIPTION
+This function causes the remote server to synchronize the file
+data and metadata to disk (like fsync(2)).
+
+For this to work requires fsync@openssh.com support on the server.
+
+\fIhandle\fP - SFTP File Handle as returned by
+.BR libssh2_sftp_open_ex(3)
+
+.SH RETURN VALUE
+Returns 0 on success or negative on failure. If used in non-blocking mode, it
+returns LIBSSH2_ERROR_EAGAIN when it would otherwise block. While
+LIBSSH2_ERROR_EAGAIN is a negative number, it isn't really a failure per se.
+.SH ERRORS
+\fILIBSSH2_ERROR_ALLOC\fP -  An internal memory allocation call failed.
+
+\fILIBSSH2_ERROR_SOCKET_SEND\fP - Unable to send data on socket.
+
+\fILIBSSH2_ERROR_SFTP_PROTOCOL\fP - An invalid SFTP protocol response
+was received on the socket, or an SFTP operation caused an errorcode
+to be returned by the server.  In particular, this can be returned if
+the SSH server does not support the fsync operation: the SFTP subcode
+\fILIBSSH2_FX_OP_UNSUPPORTED\fP will be returned in this case.
+
+.SH AVAILABILITY
+Added in libssh2 1.4.4 and OpenSSH 6.3.
+.SH SEE ALSO
+.BR fsync(2)

docs/libssh2_sftp_get_channel.3

@@ -1,21 +1,21 @@
-.TH libssh2_sftp_get_channel 3 "9 Sep 2011" "libssh2 1.4.0" "libssh2 manual"
-.SH NAME
-libssh2_sftp_get_channel - return the channel of sftp
-.SH SYNOPSIS
-.nf
-#include <libssh2.h>
-#include <libssh2_sftp.h>
-
-.fi
-LIBSSH2_CHANNEL *libssh2_sftp_get_channel(LIBSSH2_SFTP *sftp);
-.SH DESCRIPTION
-\fIsftp\fP - SFTP instance as returned by 
-.BR libssh2_sftp_init(3)
-
-Return the channel of the given sftp handle.
-.SH RETURN VALUE
-The channel of the SFTP instance or NULL if something was wrong.
-.SH AVAILABILITY
-Added in 1.4.0
-.SH SEE ALSO
-.BR libssh2_sftp_init(3)
+.TH libssh2_sftp_get_channel 3 "9 Sep 2011" "libssh2 1.4.0" "libssh2 manual"
+.SH NAME
+libssh2_sftp_get_channel - return the channel of sftp
+.SH SYNOPSIS
+.nf
+#include <libssh2.h>
+#include <libssh2_sftp.h>
+
+.fi
+LIBSSH2_CHANNEL *libssh2_sftp_get_channel(LIBSSH2_SFTP *sftp);
+.SH DESCRIPTION
+\fIsftp\fP - SFTP instance as returned by
+.BR libssh2_sftp_init(3)
+
+Return the channel of the given sftp handle.
+.SH RETURN VALUE
+The channel of the SFTP instance or NULL if something was wrong.
+.SH AVAILABILITY
+Added in 1.4.0
+.SH SEE ALSO
+.BR libssh2_sftp_init(3)

docs/libssh2_sftp_mkdir_ex.3

@@ -15,7 +15,7 @@ libssh2_sftp_mkdir(LIBSSH2_SFTP *sftp, const char *path, long mode);
 .BR libssh2_sftp_init(3)
 
 \fIpath\fP - full path of the new directory to create. Note that the new 
-directory's parents must all exist priot to making this call.
+directory's parents must all exist prior to making this call.
 
 \fIpath_len\fP - length of the full path of the new directory to create.
 

docs/libssh2_sftp_rename_ex.3

@@ -29,7 +29,7 @@ filesystem entry
 Bitmask flags made up of LIBSSH2_SFTP_RENAME_* constants.
 
 Rename a filesystem object on the remote filesystem. The semantics of 
-this command typically include the ability to move a filsystem object 
+this command typically include the ability to move a filesystem object 
 between folders and/or filesystem mounts. If the LIBSSH2_SFTP_RENAME_OVERWRITE 
 flag is not set and the destfile entry already exists, the operation 
 will fail. Use of the other two flags indicate a preference (but not a 

docs/libssh2_sftp_rewind.3

@@ -4,7 +4,7 @@ libssh2_sftp_rewind - convenience macro for \fIlibssh2_sftp_seek64(3)\fP calls
 .SH SYNOPSIS
 #include <libssh2.h>
 
-int libssh2_sftp_rewind(LINBSSH2_SFTP_HANDLE *handle);
+int libssh2_sftp_rewind(LIBSSH2_SFTP_HANDLE *handle);
 
 .SH DESCRIPTION
 This is a macro defined in a public libssh2 header file that is using the

docs/libssh2_sftp_stat.3

@@ -4,7 +4,7 @@ libssh2_sftp_stat - convenience macro for \fIlibssh2_sftp_fstat_ex(3)\fP calls
 .SH SYNOPSIS
 #include <libssh2.h>
 
-int libssh2_sftp_stat(LIBSSH2_SFTP *sftp, const char *path, LIBSSH2_STFP_ATTRIBUTES *attrs);
+int libssh2_sftp_stat(LIBSSH2_SFTP *sftp, const char *path, LIBSSH2_SFTP_ATTRIBUTES *attrs);
 
 .SH DESCRIPTION
 This is a macro defined in a public libssh2 header file that is using the

docs/libssh2_sftp_symlink_ex.3

@@ -48,7 +48,7 @@ These are convenience macros:
 .BR libssh2_sftp_realpath(3)
 : Resolve a complex, relative, or symlinked filepath to its effective target.
 .SH RETURN VALUE
-When using LIBSSH2_SFTP_SYMLINK, this funtion returns 0 on success or negative
+When using LIBSSH2_SFTP_SYMLINK, this function returns 0 on success or negative
 on failure.
 
 When using LIBSSH2_SFTP_READLINK or LIBSSH2_SFTP_REALPATH, it returns the

docs/libssh2_userauth_list.3

@@ -28,7 +28,7 @@ distinguished from a failing case by examining
 \fIlibssh2_userauth_authenticated(3)\fP.
 .SH RETURN VALUE
 On success a comma delimited list of supported authentication schemes.  This
-list is internally managed by libssh2.  On failure ruturns NULL.
+list is internally managed by libssh2.  On failure returns NULL.
 .SH ERRORS
 \fILIBSSH2_ERROR_ALLOC\fP -  An internal memory allocation call failed.
 

docs/libssh2_userauth_publickey_fromfile_ex.3

@@ -7,24 +7,28 @@ libssh2_userauth_publickey_fromfile - authenticate a session with a public key,
 .nf
 int libssh2_userauth_publickey_fromfile_ex(LIBSSH2_SESSION *session,
                                            const char *username,
+                                           unsigned int ousername_len,
                                            const char *publickey,
                                            const char *privatekey,
                                            const char *passphrase);
 .SH DESCRIPTION
-\fIsession\fP - Session instance as returned by 
-.BR libssh2_session_init_ex(3)
+\fIsession\fP - Session instance as returned by
+\fBlibssh2_session_init_ex(3)\fP
 
-\fIusername\fP - Remote user name to authenticate as.
+\fIusername\fP - Pointer to user name to authenticate as.
 
-\fIusername_len\fP - Length of username.
+\fIusername_len\fP - Length of \fIusername\fP.
 
-\fIpublickey\fP - Path and name of public key file. (e.g. /etc/ssh/hostkey.pub)
+\fIpublickey\fP - Path name of the public key file.
+(e.g. /etc/ssh/hostkey.pub). If libssh2 is built against OpenSSL, this option
+can be set to NULL.
 
-\fIprivatekey\fP - Path and name of private key file. (e.g. /etc/ssh/hostkey)
+\fIprivatekey\fP - Path name of the private key file. (e.g. /etc/ssh/hostkey)
 
-\fIpassphrase\fP - Passphrase to use when decoding private key file.
+\fIpassphrase\fP - Passphrase to use when decoding \fIprivatekey\fP.
 
-Attempt public key authentication using a PEM encoded private key file stored on disk
+Attempt public key authentication using a PEM encoded private key file stored
+on disk
 
 .SH RETURN VALUE
 Return 0 on success or negative on failure.  It returns

docs/libssh2_userauth_publickey_frommemory.3

@@ -0,0 +1,56 @@
+.TH libssh2_userauth_publickey_frommemory 3 "1 Sep 2014" "libssh2 1.5" "libssh2 manual"
+.SH NAME
+libssh2_userauth_publickey_frommemory - authenticate a session with a public key, read from memory
+.SH SYNOPSIS
+#include <libssh2.h>
+
+.nf
+int libssh2_userauth_publickey_frommemory(LIBSSH2_SESSION *session,
+                                           const char *username,
+                                           size_t username_len,
+                                           const char *publickeydata,
+                                           size_t publickeydata_len,
+                                           const char *privatekeydata,
+                                           size_t privatekeydata_len,
+                                           const char *passphrase);
+.SH DESCRIPTION
+This function allows to authenticate a session with a public key read from memory.
+It's only supported when libssh2 is backed by OpenSSL.
+\fIsession\fP - Session instance as returned by
+.BR libssh2_session_init_ex(3)
+
+\fIusername\fP - Remote user name to authenticate as.
+
+\fIusername_len\fP - Length of username.
+
+\fIpublickeydata\fP - Buffer containing the contents of a public key file.
+
+\fIpublickeydata_len\fP - Length of public key data.
+
+\fIprivatekeydata\fP - Buffer containing the contents of a private key file.
+
+\fIprivatekeydata_len\fP - Length of private key data.
+
+\fIpassphrase\fP - Passphrase to use when decoding private key file.
+
+Attempt public key authentication using a PEM encoded private key file stored in memory.
+.SH RETURN VALUE
+Return 0 on success or negative on failure.  It returns
+LIBSSH2_ERROR_EAGAIN when it would otherwise block. While
+LIBSSH2_ERROR_EAGAIN is a negative number, it isn't really a failure per se.
+.SH ERRORS
+\fILIBSSH2_ERROR_ALLOC\fP -  An internal memory allocation call failed.
+
+\fILIBSSH2_ERROR_SOCKET_SEND\fP - Unable to send data on socket.
+
+\fILIBSSH2_ERROR_SOCKET_TIMEOUT\fP - 
+
+\fILIBSSH2_ERROR_PUBLICKEY_UNVERIFIED\fP - The username/public key
+combination was invalid.
+
+\fILIBSSH2_ERROR_AUTHENTICATION_FAILED\fP - Authentication using the supplied
+public key was not accepted.
+.SH AVAILABILITY
+libssh2_userauth_publickey_frommemory was added in libssh2 1.6.0
+.SH SEE ALSO
+.BR libssh2_session_init_ex(3)

example/CMakeLists.txt

@@ -0,0 +1,100 @@
+# Copyright (c) 2014, 2015 Alexander Lamaison <alexander.lamaison@gmail.com>
+#
+# Redistribution and use in source and binary forms,
+# with or without modification, are permitted provided
+# that the following conditions are met:
+#
+#   Redistributions of source code must retain the above
+#   copyright notice, this list of conditions and the
+#   following disclaimer.
+#
+#   Redistributions in binary form must reproduce the above
+#   copyright notice, this list of conditions and the following
+#   disclaimer in the documentation and/or other materials
+#   provided with the distribution.
+#
+#   Neither the name of the copyright holder nor the names
+#   of any other contributors may be used to endorse or
+#   promote products derived from this software without
+#   specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+# CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+# INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+# OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+# CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+# SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+# NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
+# USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
+# OF SUCH DAMAGE.
+
+include(CheckIncludeFiles)
+include(CheckSymbolExists)
+include(CopyRuntimeDependencies)
+include(SocketLibraries)
+
+set(EXAMPLES
+  direct_tcpip
+  ssh2
+  scp
+  scp_nonblock
+  scp_write
+  scp_write_nonblock
+  sftp
+  sftp_nonblock
+  sftp_write
+  sftp_write_nonblock
+  sftp_mkdir
+  sftp_mkdir_nonblock
+  sftp_RW_nonblock
+  sftp_write_sliding
+  sftpdir
+  sftpdir_nonblock
+  ssh2_exec
+  ssh2_agent
+  ssh2_echo
+  sftp_append
+  subsystem_netconf
+  tcpip-forward)
+
+append_needed_socket_libraries(LIBRARIES)
+
+foreach(example ${EXAMPLES})
+  add_executable(example-${example} ${example}.c)
+  list(APPEND EXAMPLE_TARGETS example-${example})
+  # to find generated header
+  target_include_directories(example-${example} PRIVATE ${CMAKE_CURRENT_BINARY_DIR})
+  target_link_libraries(example-${example} libssh2 ${LIBRARIES})
+endforeach()
+add_target_to_copy_dependencies(
+  TARGET copy_example_dependencies
+  DEPENDENCIES ${RUNTIME_DEPENDENCIES}
+  BEFORE_TARGETS ${EXAMPLE_TARGETS})
+
+## Platform checks
+check_include_files(inttypes.h HAVE_INTTYPES_H)
+check_include_files(unistd.h HAVE_UNISTD_H)
+check_include_files(stdlib.h HAVE_STDLIB_H)
+check_include_files(sys/select.h HAVE_SYS_SELECT_H)
+check_include_files(sys/socket.h HAVE_SYS_SOCKET_H)
+check_include_files(sys/time.h HAVE_SYS_TIME_H)
+check_include_files(arpa/inet.h HAVE_ARPA_INET_H)
+check_include_files(netinet/in.h HAVE_NETINET_IN_H)
+check_include_files(winsock2.h HAVE_WINSOCK2_H)
+
+check_symbol_exists(strcasecmp strings.h HAVE_STRCASECMP)
+check_symbol_exists(_stricmp string.h HAVE__STRICMP)
+check_symbol_exists(snprintf stdio.h HAVE_SNPRINTF)
+check_symbol_exists(_snprintf stdio.h HAVE__SNPRINTF)
+
+check_symbol_exists(__func__ "" HAVE___FUNC__)
+check_symbol_exists(__FUNCTION__ "" HAVE___FUNCTION__)
+
+configure_file(
+  ${CMAKE_CURRENT_SOURCE_DIR}/libssh2_config_cmake.h.in
+  ${CMAKE_CURRENT_BINARY_DIR}/libssh2_config.h)

example/Makefile.am

@@ -1,6 +1,6 @@
 AUTOMAKE_OPTIONS = foreign nostdinc
 
-EXTRA_DIST = libssh2_config.h.in
+EXTRA_DIST = libssh2_config.h.in libssh2_config_cmake.h.in CMakeLists.txt
 
 # samples
 noinst_PROGRAMS = direct_tcpip ssh2 scp scp_nonblock scp_write		\

example/Makefile.in

@@ -1,8 +1,8 @@
-# Makefile.in generated by automake 1.9.6 from Makefile.am.
+# Makefile.in generated by automake 1.16.1 from Makefile.am.
 # @configure_input@
 
-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005  Free Software Foundation, Inc.
+# Copyright (C) 1994-2018 Free Software Foundation, Inc.
+
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -14,15 +14,67 @@
 
 @SET_MAKE@
 
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
 VPATH = @srcdir@
+am__is_gnu_make = { \
+  if test -z '$(MAKELEVEL)'; then \
+    false; \
+  elif test -n '$(MAKE_HOST)'; then \
+    true; \
+  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
+    true; \
+  else \
+    false; \
+  fi; \
+}
+am__make_running_with_option = \
+  case $${target_option-} in \
+      ?) ;; \
+      *) echo "am__make_running_with_option: internal error: invalid" \
+              "target option '$${target_option-}' specified" >&2; \
+         exit 1;; \
+  esac; \
+  has_opt=no; \
+  sane_makeflags=$$MAKEFLAGS; \
+  if $(am__is_gnu_make); then \
+    sane_makeflags=$$MFLAGS; \
+  else \
+    case $$MAKEFLAGS in \
+      *\\[\ \	]*) \
+        bs=\\; \
+        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
+          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
+    esac; \
+  fi; \
+  skip_next=no; \
+  strip_trailopt () \
+  { \
+    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+  }; \
+  for flg in $$sane_makeflags; do \
+    test $$skip_next = yes && { skip_next=no; continue; }; \
+    case $$flg in \
+      *=*|--*) continue;; \
+        -*I) strip_trailopt 'I'; skip_next=yes;; \
+      -*I?*) strip_trailopt 'I';; \
+        -*O) strip_trailopt 'O'; skip_next=yes;; \
+      -*O?*) strip_trailopt 'O';; \
+        -*l) strip_trailopt 'l'; skip_next=yes;; \
+      -*l?*) strip_trailopt 'l';; \
+      -[dEDm]) skip_next=yes;; \
+      -[JT]) skip_next=yes;; \
+    esac; \
+    case $$flg in \
+      *$$target_option*) has_opt=yes; break;; \
+    esac; \
+  done; \
+  test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
 pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
-top_builddir = ..
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-INSTALL = @INSTALL@
 install_sh_DATA = $(install_sh) -c -m 644
 install_sh_PROGRAM = $(install_sh) -c
 install_sh_SCRIPT = $(install_sh) -c
@@ -49,8 +101,6 @@ noinst_PROGRAMS = direct_tcpip$(EXEEXT) ssh2$(EXEEXT) scp$(EXEEXT) \
 	$(am__EXEEXT_1)
 @HAVE_SYS_UN_H_TRUE@am__append_1 = x11
 subdir = example
-DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \
-	$(srcdir)/libssh2_config.h.in
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
 am__aclocal_m4_deps = $(top_srcdir)/m4/autobuild.m4 \
 	$(top_srcdir)/m4/lib-ld.m4 $(top_srcdir)/m4/lib-link.m4 \
@@ -60,15 +110,21 @@ am__aclocal_m4_deps = $(top_srcdir)/m4/autobuild.m4 \
 	$(top_srcdir)/acinclude.m4 $(top_srcdir)/configure.ac
 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 	$(ACLOCAL_M4)
+DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
 mkinstalldirs = $(install_sh) -d
 CONFIG_HEADER = $(top_builddir)/src/libssh2_config.h libssh2_config.h
 CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
 @HAVE_SYS_UN_H_TRUE@am__EXEEXT_1 = x11$(EXEEXT)
 PROGRAMS = $(noinst_PROGRAMS)
 direct_tcpip_SOURCES = direct_tcpip.c
 direct_tcpip_OBJECTS = direct_tcpip.$(OBJEXT)
 direct_tcpip_LDADD = $(LDADD)
 direct_tcpip_DEPENDENCIES = $(top_builddir)/src/libssh2.la
+AM_V_lt = $(am__v_lt_@AM_V@)
+am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@)
+am__v_lt_0 = --silent
+am__v_lt_1 = 
 scp_SOURCES = scp.c
 scp_OBJECTS = scp.$(OBJEXT)
 scp_LDADD = $(LDADD)
@@ -157,17 +213,52 @@ x11_SOURCES = x11.c
 x11_OBJECTS = x11.$(OBJEXT)
 x11_LDADD = $(LDADD)
 x11_DEPENDENCIES = $(top_builddir)/src/libssh2.la
+AM_V_P = $(am__v_P_@AM_V@)
+am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
+am__v_P_0 = false
+am__v_P_1 = :
+AM_V_GEN = $(am__v_GEN_@AM_V@)
+am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
+am__v_GEN_0 = @echo "  GEN     " $@;
+am__v_GEN_1 = 
+AM_V_at = $(am__v_at_@AM_V@)
+am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
+am__v_at_0 = @
+am__v_at_1 = 
 DEFAULT_INCLUDES = 
 depcomp = $(SHELL) $(top_srcdir)/depcomp
-am__depfiles_maybe = depfiles
+am__maybe_remake_depfiles = depfiles
+am__depfiles_remade = ./$(DEPDIR)/direct_tcpip.Po ./$(DEPDIR)/scp.Po \
+	./$(DEPDIR)/scp_nonblock.Po ./$(DEPDIR)/scp_write.Po \
+	./$(DEPDIR)/scp_write_nonblock.Po ./$(DEPDIR)/sftp.Po \
+	./$(DEPDIR)/sftp_RW_nonblock.Po ./$(DEPDIR)/sftp_append.Po \
+	./$(DEPDIR)/sftp_mkdir.Po ./$(DEPDIR)/sftp_mkdir_nonblock.Po \
+	./$(DEPDIR)/sftp_nonblock.Po ./$(DEPDIR)/sftp_write.Po \
+	./$(DEPDIR)/sftp_write_nonblock.Po \
+	./$(DEPDIR)/sftp_write_sliding.Po ./$(DEPDIR)/sftpdir.Po \
+	./$(DEPDIR)/sftpdir_nonblock.Po ./$(DEPDIR)/ssh2.Po \
+	./$(DEPDIR)/ssh2_agent.Po ./$(DEPDIR)/ssh2_echo.Po \
+	./$(DEPDIR)/ssh2_exec.Po ./$(DEPDIR)/subsystem_netconf.Po \
+	./$(DEPDIR)/tcpip-forward.Po ./$(DEPDIR)/x11.Po
+am__mv = mv -f
 COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
 	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-LTCOMPILE = $(LIBTOOL) --tag=CC --mode=compile $(CC) $(DEFS) \
+LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
+	$(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) \
 	$(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
 	$(AM_CFLAGS) $(CFLAGS)
+AM_V_CC = $(am__v_CC_@AM_V@)
+am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@)
+am__v_CC_0 = @echo "  CC      " $@;
+am__v_CC_1 = 
 CCLD = $(CC)
-LINK = $(LIBTOOL) --tag=CC --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
+LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
+	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
 	$(AM_LDFLAGS) $(LDFLAGS) -o $@
+AM_V_CCLD = $(am__v_CCLD_@AM_V@)
+am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@)
+am__v_CCLD_0 = @echo "  CCLD    " $@;
+am__v_CCLD_1 = 
 SOURCES = direct_tcpip.c scp.c scp_nonblock.c scp_write.c \
 	scp_write_nonblock.c sftp.c sftp_RW_nonblock.c sftp_append.c \
 	sftp_mkdir.c sftp_mkdir_nonblock.c sftp_nonblock.c \
@@ -180,22 +271,44 @@ DIST_SOURCES = direct_tcpip.c scp.c scp_nonblock.c scp_write.c \
 	sftp_write.c sftp_write_nonblock.c sftp_write_sliding.c \
 	sftpdir.c sftpdir_nonblock.c ssh2.c ssh2_agent.c ssh2_echo.c \
 	ssh2_exec.c subsystem_netconf.c tcpip-forward.c x11.c
+am__can_run_installinfo = \
+  case $$AM_UPDATE_INFO_DIR in \
+    n|no|NO) false;; \
+    *) (install-info --version) >/dev/null 2>&1;; \
+  esac
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) \
+	$(LISP)libssh2_config.h.in
+# Read a list of newline-separated strings from the standard input,
+# and print each of them once, without duplicates.  Input order is
+# *not* preserved.
+am__uniquify_input = $(AWK) '\
+  BEGIN { nonempty = 0; } \
+  { items[$$0] = 1; nonempty = 1; } \
+  END { if (nonempty) { for (i in items) print i; }; } \
+'
+# Make sure the list of sources is unique.  This is necessary because,
+# e.g., the same source file might be shared among _SOURCES variables
+# for different programs/libraries.
+am__define_uniq_tagged_files = \
+  list='$(am__tagged_files)'; \
+  unique=`for i in $$list; do \
+    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+  done | $(am__uniquify_input)`
 ETAGS = etags
 CTAGS = ctags
+am__DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/libssh2_config.h.in \
+	$(top_srcdir)/depcomp
 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
 ACLOCAL = @ACLOCAL@
 ALLOCA = @ALLOCA@
-AMDEP_FALSE = @AMDEP_FALSE@
-AMDEP_TRUE = @AMDEP_TRUE@
 AMTAR = @AMTAR@
+AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
 AR = @AR@
 AS = @AS@
 AUTOCONF = @AUTOCONF@
 AUTOHEADER = @AUTOHEADER@
 AUTOMAKE = @AUTOMAKE@
 AWK = @AWK@
-BUILD_EXAMPLES_FALSE = @BUILD_EXAMPLES_FALSE@
-BUILD_EXAMPLES_TRUE = @BUILD_EXAMPLES_TRUE@
 CC = @CC@
 CCDEPMODE = @CCDEPMODE@
 CFLAGS = @CFLAGS@
@@ -214,21 +327,27 @@ EGREP = @EGREP@
 EXEEXT = @EXEEXT@
 FGREP = @FGREP@
 GREP = @GREP@
+HAVE_LIBBCRYPT = @HAVE_LIBBCRYPT@
+HAVE_LIBCRYPT32 = @HAVE_LIBCRYPT32@
 HAVE_LIBGCRYPT = @HAVE_LIBGCRYPT@
+HAVE_LIBMBEDTLS = @HAVE_LIBMBEDTLS@
 HAVE_LIBSSL = @HAVE_LIBSSL@
 HAVE_LIBZ = @HAVE_LIBZ@
-HAVE_SYS_UN_H_FALSE = @HAVE_SYS_UN_H_FALSE@
-HAVE_SYS_UN_H_TRUE = @HAVE_SYS_UN_H_TRUE@
+INSTALL = @INSTALL@
 INSTALL_DATA = @INSTALL_DATA@
 INSTALL_PROGRAM = @INSTALL_PROGRAM@
 INSTALL_SCRIPT = @INSTALL_SCRIPT@
 INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
 LD = @LD@
 LDFLAGS = @LDFLAGS@
+LIBBCRYPT = @LIBBCRYPT@
+LIBBCRYPT_PREFIX = @LIBBCRYPT_PREFIX@
+LIBCRYPT32 = @LIBCRYPT32@
+LIBCRYPT32_PREFIX = @LIBCRYPT32_PREFIX@
 LIBGCRYPT = @LIBGCRYPT@
-LIBGCRYPT_FALSE = @LIBGCRYPT_FALSE@
 LIBGCRYPT_PREFIX = @LIBGCRYPT_PREFIX@
-LIBGCRYPT_TRUE = @LIBGCRYPT_TRUE@
+LIBMBEDTLS = @LIBMBEDTLS@
+LIBMBEDTLS_PREFIX = @LIBMBEDTLS_PREFIX@
 LIBOBJS = @LIBOBJS@
 LIBS = @LIBS@
 LIBSREQUIRED = @LIBSREQUIRED@
@@ -240,15 +359,18 @@ LIBZ = @LIBZ@
 LIBZ_PREFIX = @LIBZ_PREFIX@
 LIPO = @LIPO@
 LN_S = @LN_S@
+LTLIBBCRYPT = @LTLIBBCRYPT@
+LTLIBCRYPT32 = @LTLIBCRYPT32@
 LTLIBGCRYPT = @LTLIBGCRYPT@
+LTLIBMBEDTLS = @LTLIBMBEDTLS@
 LTLIBOBJS = @LTLIBOBJS@
 LTLIBSSL = @LTLIBSSL@
 LTLIBZ = @LTLIBZ@
+LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
 MAINT = @MAINT@
-MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@
-MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@
 MAKEINFO = @MAKEINFO@
 MANIFEST_TOOL = @MANIFEST_TOOL@
+MKDIR_P = @MKDIR_P@
 NM = @NM@
 NMEDIT = @NMEDIT@
 OBJDUMP = @OBJDUMP@
@@ -268,15 +390,15 @@ SED = @SED@
 SET_MAKE = @SET_MAKE@
 SHELL = @SHELL@
 SSHD = @SSHD@
-SSHD_FALSE = @SSHD_FALSE@
-SSHD_TRUE = @SSHD_TRUE@
 STRIP = @STRIP@
 VERSION = @VERSION@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
 ac_ct_AR = @ac_ct_AR@
 ac_ct_CC = @ac_ct_CC@
 ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
-am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
-am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
 am__include = @am__include@
 am__leading_dot = @am__leading_dot@
 am__quote = @am__quote@
@@ -288,6 +410,7 @@ build_alias = @build_alias@
 build_cpu = @build_cpu@
 build_os = @build_os@
 build_vendor = @build_vendor@
+builddir = @builddir@
 datadir = @datadir@
 datarootdir = @datarootdir@
 docdir = @docdir@
@@ -313,12 +436,17 @@ pdfdir = @pdfdir@
 prefix = @prefix@
 program_transform_name = @program_transform_name@
 psdir = @psdir@
+runstatedir = @runstatedir@
 sbindir = @sbindir@
 sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
 sysconfdir = @sysconfdir@
 target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
 AUTOMAKE_OPTIONS = foreign nostdinc
-EXTRA_DIST = libssh2_config.h.in
+EXTRA_DIST = libssh2_config.h.in libssh2_config_cmake.h.in CMakeLists.txt
 AM_CPPFLAGS = -I$(top_srcdir)/include -I$(top_builddir)/example
 LDADD = $(top_builddir)/src/libssh2.la
 all: libssh2_config.h
@@ -330,22 +458,21 @@ $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__confi
 	@for dep in $?; do \
 	  case '$(am__configure_deps)' in \
 	    *$$dep*) \
-	      cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
-		&& exit 0; \
+	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+	        && { if test -f $@; then exit 0; else break; fi; }; \
 	      exit 1;; \
 	  esac; \
 	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  example/Makefile'; \
-	cd $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign  example/Makefile
-.PRECIOUS: Makefile
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign example/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign example/Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
 	  *config.status*) \
 	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
 	  *) \
-	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
-	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles);; \
 	esac;
 
 $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
@@ -355,99 +482,119 @@ $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
 
 libssh2_config.h: stamp-h2
-	@if test ! -f $@; then \
-	  rm -f stamp-h2; \
-	  $(MAKE) stamp-h2; \
-	else :; fi
+	@test -f $@ || rm -f stamp-h2
+	@test -f $@ || $(MAKE) $(AM_MAKEFLAGS) stamp-h2
 
 stamp-h2: $(srcdir)/libssh2_config.h.in $(top_builddir)/config.status
 	@rm -f stamp-h2
 	cd $(top_builddir) && $(SHELL) ./config.status example/libssh2_config.h
-$(srcdir)/libssh2_config.h.in: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) 
-	cd $(top_srcdir) && $(AUTOHEADER)
-	rm -f stamp-h2
-	touch $@
 
 distclean-hdr:
 	-rm -f libssh2_config.h stamp-h2
 
 clean-noinstPROGRAMS:
-	@list='$(noinst_PROGRAMS)'; for p in $$list; do \
-	  f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
-	  echo " rm -f $$p $$f"; \
-	  rm -f $$p $$f ; \
-	done
-direct_tcpip$(EXEEXT): $(direct_tcpip_OBJECTS) $(direct_tcpip_DEPENDENCIES) 
+	@list='$(noinst_PROGRAMS)'; test -n "$$list" || exit 0; \
+	echo " rm -f" $$list; \
+	rm -f $$list || exit $$?; \
+	test -n "$(EXEEXT)" || exit 0; \
+	list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
+	echo " rm -f" $$list; \
+	rm -f $$list
+
+direct_tcpip$(EXEEXT): $(direct_tcpip_OBJECTS) $(direct_tcpip_DEPENDENCIES) $(EXTRA_direct_tcpip_DEPENDENCIES) 
 	@rm -f direct_tcpip$(EXEEXT)
-	$(LINK) $(direct_tcpip_LDFLAGS) $(direct_tcpip_OBJECTS) $(direct_tcpip_LDADD) $(LIBS)
-scp$(EXEEXT): $(scp_OBJECTS) $(scp_DEPENDENCIES) 
+	$(AM_V_CCLD)$(LINK) $(direct_tcpip_OBJECTS) $(direct_tcpip_LDADD) $(LIBS)
+
+scp$(EXEEXT): $(scp_OBJECTS) $(scp_DEPENDENCIES) $(EXTRA_scp_DEPENDENCIES) 
 	@rm -f scp$(EXEEXT)
-	$(LINK) $(scp_LDFLAGS) $(scp_OBJECTS) $(scp_LDADD) $(LIBS)
-scp_nonblock$(EXEEXT): $(scp_nonblock_OBJECTS) $(scp_nonblock_DEPENDENCIES) 
+	$(AM_V_CCLD)$(LINK) $(scp_OBJECTS) $(scp_LDADD) $(LIBS)
+
+scp_nonblock$(EXEEXT): $(scp_nonblock_OBJECTS) $(scp_nonblock_DEPENDENCIES) $(EXTRA_scp_nonblock_DEPENDENCIES) 
 	@rm -f scp_nonblock$(EXEEXT)
-	$(LINK) $(scp_nonblock_LDFLAGS) $(scp_nonblock_OBJECTS) $(scp_nonblock_LDADD) $(LIBS)
-scp_write$(EXEEXT): $(scp_write_OBJECTS) $(scp_write_DEPENDENCIES) 
+	$(AM_V_CCLD)$(LINK) $(scp_nonblock_OBJECTS) $(scp_nonblock_LDADD) $(LIBS)
+
+scp_write$(EXEEXT): $(scp_write_OBJECTS) $(scp_write_DEPENDENCIES) $(EXTRA_scp_write_DEPENDENCIES) 
 	@rm -f scp_write$(EXEEXT)
-	$(LINK) $(scp_write_LDFLAGS) $(scp_write_OBJECTS) $(scp_write_LDADD) $(LIBS)
-scp_write_nonblock$(EXEEXT): $(scp_write_nonblock_OBJECTS) $(scp_write_nonblock_DEPENDENCIES) 
+	$(AM_V_CCLD)$(LINK) $(scp_write_OBJECTS) $(scp_write_LDADD) $(LIBS)
+
+scp_write_nonblock$(EXEEXT): $(scp_write_nonblock_OBJECTS) $(scp_write_nonblock_DEPENDENCIES) $(EXTRA_scp_write_nonblock_DEPENDENCIES) 
 	@rm -f scp_write_nonblock$(EXEEXT)
-	$(LINK) $(scp_write_nonblock_LDFLAGS) $(scp_write_nonblock_OBJECTS) $(scp_write_nonblock_LDADD) $(LIBS)
-sftp$(EXEEXT): $(sftp_OBJECTS) $(sftp_DEPENDENCIES) 
+	$(AM_V_CCLD)$(LINK) $(scp_write_nonblock_OBJECTS) $(scp_write_nonblock_LDADD) $(LIBS)
+
+sftp$(EXEEXT): $(sftp_OBJECTS) $(sftp_DEPENDENCIES) $(EXTRA_sftp_DEPENDENCIES) 
 	@rm -f sftp$(EXEEXT)
-	$(LINK) $(sftp_LDFLAGS) $(sftp_OBJECTS) $(sftp_LDADD) $(LIBS)
-sftp_RW_nonblock$(EXEEXT): $(sftp_RW_nonblock_OBJECTS) $(sftp_RW_nonblock_DEPENDENCIES) 
+	$(AM_V_CCLD)$(LINK) $(sftp_OBJECTS) $(sftp_LDADD) $(LIBS)
+
+sftp_RW_nonblock$(EXEEXT): $(sftp_RW_nonblock_OBJECTS) $(sftp_RW_nonblock_DEPENDENCIES) $(EXTRA_sftp_RW_nonblock_DEPENDENCIES) 
 	@rm -f sftp_RW_nonblock$(EXEEXT)
-	$(LINK) $(sftp_RW_nonblock_LDFLAGS) $(sftp_RW_nonblock_OBJECTS) $(sftp_RW_nonblock_LDADD) $(LIBS)
-sftp_append$(EXEEXT): $(sftp_append_OBJECTS) $(sftp_append_DEPENDENCIES) 
+	$(AM_V_CCLD)$(LINK) $(sftp_RW_nonblock_OBJECTS) $(sftp_RW_nonblock_LDADD) $(LIBS)
+
+sftp_append$(EXEEXT): $(sftp_append_OBJECTS) $(sftp_append_DEPENDENCIES) $(EXTRA_sftp_append_DEPENDENCIES) 
 	@rm -f sftp_append$(EXEEXT)
-	$(LINK) $(sftp_append_LDFLAGS) $(sftp_append_OBJECTS) $(sftp_append_LDADD) $(LIBS)
-sftp_mkdir$(EXEEXT): $(sftp_mkdir_OBJECTS) $(sftp_mkdir_DEPENDENCIES) 
+	$(AM_V_CCLD)$(LINK) $(sftp_append_OBJECTS) $(sftp_append_LDADD) $(LIBS)
+
+sftp_mkdir$(EXEEXT): $(sftp_mkdir_OBJECTS) $(sftp_mkdir_DEPENDENCIES) $(EXTRA_sftp_mkdir_DEPENDENCIES) 
 	@rm -f sftp_mkdir$(EXEEXT)
-	$(LINK) $(sftp_mkdir_LDFLAGS) $(sftp_mkdir_OBJECTS) $(sftp_mkdir_LDADD) $(LIBS)
-sftp_mkdir_nonblock$(EXEEXT): $(sftp_mkdir_nonblock_OBJECTS) $(sftp_mkdir_nonblock_DEPENDENCIES) 
+	$(AM_V_CCLD)$(LINK) $(sftp_mkdir_OBJECTS) $(sftp_mkdir_LDADD) $(LIBS)
+
+sftp_mkdir_nonblock$(EXEEXT): $(sftp_mkdir_nonblock_OBJECTS) $(sftp_mkdir_nonblock_DEPENDENCIES) $(EXTRA_sftp_mkdir_nonblock_DEPENDENCIES) 
 	@rm -f sftp_mkdir_nonblock$(EXEEXT)
-	$(LINK) $(sftp_mkdir_nonblock_LDFLAGS) $(sftp_mkdir_nonblock_OBJECTS) $(sftp_mkdir_nonblock_LDADD) $(LIBS)
-sftp_nonblock$(EXEEXT): $(sftp_nonblock_OBJECTS) $(sftp_nonblock_DEPENDENCIES) 
+	$(AM_V_CCLD)$(LINK) $(sftp_mkdir_nonblock_OBJECTS) $(sftp_mkdir_nonblock_LDADD) $(LIBS)
+
+sftp_nonblock$(EXEEXT): $(sftp_nonblock_OBJECTS) $(sftp_nonblock_DEPENDENCIES) $(EXTRA_sftp_nonblock_DEPENDENCIES) 
 	@rm -f sftp_nonblock$(EXEEXT)
-	$(LINK) $(sftp_nonblock_LDFLAGS) $(sftp_nonblock_OBJECTS) $(sftp_nonblock_LDADD) $(LIBS)
-sftp_write$(EXEEXT): $(sftp_write_OBJECTS) $(sftp_write_DEPENDENCIES) 
+	$(AM_V_CCLD)$(LINK) $(sftp_nonblock_OBJECTS) $(sftp_nonblock_LDADD) $(LIBS)
+
+sftp_write$(EXEEXT): $(sftp_write_OBJECTS) $(sftp_write_DEPENDENCIES) $(EXTRA_sftp_write_DEPENDENCIES) 
 	@rm -f sftp_write$(EXEEXT)
-	$(LINK) $(sftp_write_LDFLAGS) $(sftp_write_OBJECTS) $(sftp_write_LDADD) $(LIBS)
-sftp_write_nonblock$(EXEEXT): $(sftp_write_nonblock_OBJECTS) $(sftp_write_nonblock_DEPENDENCIES) 
+	$(AM_V_CCLD)$(LINK) $(sftp_write_OBJECTS) $(sftp_write_LDADD) $(LIBS)
+
+sftp_write_nonblock$(EXEEXT): $(sftp_write_nonblock_OBJECTS) $(sftp_write_nonblock_DEPENDENCIES) $(EXTRA_sftp_write_nonblock_DEPENDENCIES) 
 	@rm -f sftp_write_nonblock$(EXEEXT)
-	$(LINK) $(sftp_write_nonblock_LDFLAGS) $(sftp_write_nonblock_OBJECTS) $(sftp_write_nonblock_LDADD) $(LIBS)
-sftp_write_sliding$(EXEEXT): $(sftp_write_sliding_OBJECTS) $(sftp_write_sliding_DEPENDENCIES) 
+	$(AM_V_CCLD)$(LINK) $(sftp_write_nonblock_OBJECTS) $(sftp_write_nonblock_LDADD) $(LIBS)
+
+sftp_write_sliding$(EXEEXT): $(sftp_write_sliding_OBJECTS) $(sftp_write_sliding_DEPENDENCIES) $(EXTRA_sftp_write_sliding_DEPENDENCIES) 
 	@rm -f sftp_write_sliding$(EXEEXT)
-	$(LINK) $(sftp_write_sliding_LDFLAGS) $(sftp_write_sliding_OBJECTS) $(sftp_write_sliding_LDADD) $(LIBS)
-sftpdir$(EXEEXT): $(sftpdir_OBJECTS) $(sftpdir_DEPENDENCIES) 
+	$(AM_V_CCLD)$(LINK) $(sftp_write_sliding_OBJECTS) $(sftp_write_sliding_LDADD) $(LIBS)
+
+sftpdir$(EXEEXT): $(sftpdir_OBJECTS) $(sftpdir_DEPENDENCIES) $(EXTRA_sftpdir_DEPENDENCIES) 
 	@rm -f sftpdir$(EXEEXT)
-	$(LINK) $(sftpdir_LDFLAGS) $(sftpdir_OBJECTS) $(sftpdir_LDADD) $(LIBS)
-sftpdir_nonblock$(EXEEXT): $(sftpdir_nonblock_OBJECTS) $(sftpdir_nonblock_DEPENDENCIES) 
+	$(AM_V_CCLD)$(LINK) $(sftpdir_OBJECTS) $(sftpdir_LDADD) $(LIBS)
+
+sftpdir_nonblock$(EXEEXT): $(sftpdir_nonblock_OBJECTS) $(sftpdir_nonblock_DEPENDENCIES) $(EXTRA_sftpdir_nonblock_DEPENDENCIES) 
 	@rm -f sftpdir_nonblock$(EXEEXT)
-	$(LINK) $(sftpdir_nonblock_LDFLAGS) $(sftpdir_nonblock_OBJECTS) $(sftpdir_nonblock_LDADD) $(LIBS)
-ssh2$(EXEEXT): $(ssh2_OBJECTS) $(ssh2_DEPENDENCIES) 
+	$(AM_V_CCLD)$(LINK) $(sftpdir_nonblock_OBJECTS) $(sftpdir_nonblock_LDADD) $(LIBS)
+
+ssh2$(EXEEXT): $(ssh2_OBJECTS) $(ssh2_DEPENDENCIES) $(EXTRA_ssh2_DEPENDENCIES) 
 	@rm -f ssh2$(EXEEXT)
-	$(LINK) $(ssh2_LDFLAGS) $(ssh2_OBJECTS) $(ssh2_LDADD) $(LIBS)
-ssh2_agent$(EXEEXT): $(ssh2_agent_OBJECTS) $(ssh2_agent_DEPENDENCIES) 
+	$(AM_V_CCLD)$(LINK) $(ssh2_OBJECTS) $(ssh2_LDADD) $(LIBS)
+
+ssh2_agent$(EXEEXT): $(ssh2_agent_OBJECTS) $(ssh2_agent_DEPENDENCIES) $(EXTRA_ssh2_agent_DEPENDENCIES) 
 	@rm -f ssh2_agent$(EXEEXT)
-	$(LINK) $(ssh2_agent_LDFLAGS) $(ssh2_agent_OBJECTS) $(ssh2_agent_LDADD) $(LIBS)
-ssh2_echo$(EXEEXT): $(ssh2_echo_OBJECTS) $(ssh2_echo_DEPENDENCIES) 
+	$(AM_V_CCLD)$(LINK) $(ssh2_agent_OBJECTS) $(ssh2_agent_LDADD) $(LIBS)
+
+ssh2_echo$(EXEEXT): $(ssh2_echo_OBJECTS) $(ssh2_echo_DEPENDENCIES) $(EXTRA_ssh2_echo_DEPENDENCIES) 
 	@rm -f ssh2_echo$(EXEEXT)
-	$(LINK) $(ssh2_echo_LDFLAGS) $(ssh2_echo_OBJECTS) $(ssh2_echo_LDADD) $(LIBS)
-ssh2_exec$(EXEEXT): $(ssh2_exec_OBJECTS) $(ssh2_exec_DEPENDENCIES) 
+	$(AM_V_CCLD)$(LINK) $(ssh2_echo_OBJECTS) $(ssh2_echo_LDADD) $(LIBS)
+
+ssh2_exec$(EXEEXT): $(ssh2_exec_OBJECTS) $(ssh2_exec_DEPENDENCIES) $(EXTRA_ssh2_exec_DEPENDENCIES) 
 	@rm -f ssh2_exec$(EXEEXT)
-	$(LINK) $(ssh2_exec_LDFLAGS) $(ssh2_exec_OBJECTS) $(ssh2_exec_LDADD) $(LIBS)
-subsystem_netconf$(EXEEXT): $(subsystem_netconf_OBJECTS) $(subsystem_netconf_DEPENDENCIES) 
+	$(AM_V_CCLD)$(LINK) $(ssh2_exec_OBJECTS) $(ssh2_exec_LDADD) $(LIBS)
+
+subsystem_netconf$(EXEEXT): $(subsystem_netconf_OBJECTS) $(subsystem_netconf_DEPENDENCIES) $(EXTRA_subsystem_netconf_DEPENDENCIES) 
 	@rm -f subsystem_netconf$(EXEEXT)
-	$(LINK) $(subsystem_netconf_LDFLAGS) $(subsystem_netconf_OBJECTS) $(subsystem_netconf_LDADD) $(LIBS)
-tcpip-forward$(EXEEXT): $(tcpip_forward_OBJECTS) $(tcpip_forward_DEPENDENCIES) 
+	$(AM_V_CCLD)$(LINK) $(subsystem_netconf_OBJECTS) $(subsystem_netconf_LDADD) $(LIBS)
+
+tcpip-forward$(EXEEXT): $(tcpip_forward_OBJECTS) $(tcpip_forward_DEPENDENCIES) $(EXTRA_tcpip_forward_DEPENDENCIES) 
 	@rm -f tcpip-forward$(EXEEXT)
-	$(LINK) $(tcpip_forward_LDFLAGS) $(tcpip_forward_OBJECTS) $(tcpip_forward_LDADD) $(LIBS)
-x11$(EXEEXT): $(x11_OBJECTS) $(x11_DEPENDENCIES) 
+	$(AM_V_CCLD)$(LINK) $(tcpip_forward_OBJECTS) $(tcpip_forward_LDADD) $(LIBS)
+
+x11$(EXEEXT): $(x11_OBJECTS) $(x11_DEPENDENCIES) $(EXTRA_x11_DEPENDENCIES) 
 	@rm -f x11$(EXEEXT)
-	$(LINK) $(x11_LDFLAGS) $(x11_OBJECTS) $(x11_LDADD) $(LIBS)
+	$(AM_V_CCLD)$(LINK) $(x11_OBJECTS) $(x11_LDADD) $(LIBS)
 
 mostlyclean-compile:
 	-rm -f *.$(OBJEXT)
@@ -455,50 +602,56 @@ mostlyclean-compile:
 distclean-compile:
 	-rm -f *.tab.c
 
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/direct_tcpip.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/scp.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/scp_nonblock.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/scp_write.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/scp_write_nonblock.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/sftp.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/sftp_RW_nonblock.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/sftp_append.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/sftp_mkdir.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/sftp_mkdir_nonblock.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/sftp_nonblock.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/sftp_write.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/sftp_write_nonblock.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/sftp_write_sliding.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/sftpdir.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/sftpdir_nonblock.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ssh2.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ssh2_agent.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ssh2_echo.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ssh2_exec.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/subsystem_netconf.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tcpip-forward.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/x11.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/direct_tcpip.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/scp.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/scp_nonblock.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/scp_write.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/scp_write_nonblock.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/sftp.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/sftp_RW_nonblock.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/sftp_append.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/sftp_mkdir.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/sftp_mkdir_nonblock.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/sftp_nonblock.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/sftp_write.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/sftp_write_nonblock.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/sftp_write_sliding.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/sftpdir.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/sftpdir_nonblock.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ssh2.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ssh2_agent.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ssh2_echo.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ssh2_exec.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/subsystem_netconf.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tcpip-forward.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/x11.Po@am__quote@ # am--include-marker
+
+$(am__depfiles_remade):
+	@$(MKDIR_P) $(@D)
+	@echo '# dummy' >$@-t && $(am__mv) $@-t $@
+
+am--depfiles: $(am__depfiles_remade)
 
 .c.o:
-@am__fastdepCC_TRUE@	if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \
-@am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@am__fastdepCC_TRUE@	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(COMPILE) -c $<
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ $<
 
 .c.obj:
-@am__fastdepCC_TRUE@	if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ `$(CYGPATH_W) '$<'`; \
-@am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@am__fastdepCC_TRUE@	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
+@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(COMPILE) -c `$(CYGPATH_W) '$<'`
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
 
 .c.lo:
-@am__fastdepCC_TRUE@	if $(LTCOMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \
-@am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Plo"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
+@am__fastdepCC_TRUE@	$(AM_V_CC)$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(LTCOMPILE) -c -o $@ $<
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(LTCOMPILE) -c -o $@ $<
 
 mostlyclean-libtool:
 	-rm -f *.lo
@@ -506,82 +659,88 @@ mostlyclean-libtool:
 clean-libtool:
 	-rm -rf .libs _libs
 
-distclean-libtool:
-	-rm -f libtool
-uninstall-info-am:
+ID: $(am__tagged_files)
+	$(am__define_uniq_tagged_files); mkid -fID $$unique
+tags: tags-am
+TAGS: tags
 
-ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
-	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
-	unique=`for i in $$list; do \
-	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-	  done | \
-	  $(AWK) '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	mkid -fID $$unique
-tags: TAGS
-
-TAGS:  $(HEADERS) $(SOURCES) libssh2_config.h.in $(TAGS_DEPENDENCIES) \
-		$(TAGS_FILES) $(LISP)
-	tags=; \
+tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+	set x; \
 	here=`pwd`; \
-	list='$(SOURCES) $(HEADERS) libssh2_config.h.in $(LISP) $(TAGS_FILES)'; \
-	unique=`for i in $$list; do \
-	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-	  done | \
-	  $(AWK) '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+	$(am__define_uniq_tagged_files); \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
 	  test -n "$$unique" || unique=$$empty_fix; \
-	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	    $$tags $$unique; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
 	fi
-ctags: CTAGS
-CTAGS:  $(HEADERS) $(SOURCES) libssh2_config.h.in $(TAGS_DEPENDENCIES) \
-		$(TAGS_FILES) $(LISP)
-	tags=; \
-	here=`pwd`; \
-	list='$(SOURCES) $(HEADERS) libssh2_config.h.in $(LISP) $(TAGS_FILES)'; \
-	unique=`for i in $$list; do \
-	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-	  done | \
-	  $(AWK) '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	test -z "$(CTAGS_ARGS)$$tags$$unique" \
+ctags: ctags-am
+
+CTAGS: ctags
+ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+	$(am__define_uniq_tagged_files); \
+	test -z "$(CTAGS_ARGS)$$unique" \
 	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$tags $$unique
+	     $$unique
 
 GTAGS:
 	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && cd $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) $$here
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
+cscopelist: cscopelist-am
+
+cscopelist-am: $(am__tagged_files)
+	list='$(am__tagged_files)'; \
+	case "$(srcdir)" in \
+	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
+	  *) sdir=$(subdir)/$(srcdir) ;; \
+	esac; \
+	for i in $$list; do \
+	  if test -f "$$i"; then \
+	    echo "$(subdir)/$$i"; \
+	  else \
+	    echo "$$sdir/$$i"; \
+	  fi; \
+	done >> $(top_builddir)/cscope.files
 
 distclean-tags:
 	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
 
-distdir: $(DISTFILES)
-	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
-	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
-	list='$(DISTFILES)'; for file in $$list; do \
-	  case $$file in \
-	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
-	    $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
-	  esac; \
+distdir: $(BUILT_SOURCES)
+	$(MAKE) $(AM_MAKEFLAGS) distdir-am
+
+distdir-am: $(DISTFILES)
+	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	list='$(DISTFILES)'; \
+	  dist_files=`for file in $$list; do echo $$file; done | \
+	  sed -e "s|^$$srcdirstrip/||;t" \
+	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+	case $$dist_files in \
+	  */*) $(MKDIR_P) `echo "$$dist_files" | \
+			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+			   sort -u` ;; \
+	esac; \
+	for file in $$dist_files; do \
 	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
-	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
-	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
-	    dir="/$$dir"; \
-	    $(mkdir_p) "$(distdir)$$dir"; \
-	  else \
-	    dir=''; \
-	  fi; \
 	  if test -d $$d/$$file; then \
-	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 	    fi; \
-	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
 	  else \
-	    test -f $(distdir)/$$file \
-	    || cp -p $$d/$$file $(distdir)/$$file \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
 	    || exit 1; \
 	  fi; \
 	done
@@ -599,16 +758,22 @@ install-am: all-am
 
 installcheck: installcheck-am
 install-strip:
-	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	  `test -z '$(STRIP)' || \
-	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+	if test -z '$(STRIP)'; then \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	      install; \
+	else \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+	fi
 mostlyclean-generic:
 
 clean-generic:
 
 distclean-generic:
 	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
 
 maintainer-clean-generic:
 	@echo "This command is intended for maintainers to use"
@@ -619,10 +784,32 @@ clean-am: clean-generic clean-libtool clean-noinstPROGRAMS \
 	mostlyclean-am
 
 distclean: distclean-am
-	-rm -rf ./$(DEPDIR)
+		-rm -f ./$(DEPDIR)/direct_tcpip.Po
+	-rm -f ./$(DEPDIR)/scp.Po
+	-rm -f ./$(DEPDIR)/scp_nonblock.Po
+	-rm -f ./$(DEPDIR)/scp_write.Po
+	-rm -f ./$(DEPDIR)/scp_write_nonblock.Po
+	-rm -f ./$(DEPDIR)/sftp.Po
+	-rm -f ./$(DEPDIR)/sftp_RW_nonblock.Po
+	-rm -f ./$(DEPDIR)/sftp_append.Po
+	-rm -f ./$(DEPDIR)/sftp_mkdir.Po
+	-rm -f ./$(DEPDIR)/sftp_mkdir_nonblock.Po
+	-rm -f ./$(DEPDIR)/sftp_nonblock.Po
+	-rm -f ./$(DEPDIR)/sftp_write.Po
+	-rm -f ./$(DEPDIR)/sftp_write_nonblock.Po
+	-rm -f ./$(DEPDIR)/sftp_write_sliding.Po
+	-rm -f ./$(DEPDIR)/sftpdir.Po
+	-rm -f ./$(DEPDIR)/sftpdir_nonblock.Po
+	-rm -f ./$(DEPDIR)/ssh2.Po
+	-rm -f ./$(DEPDIR)/ssh2_agent.Po
+	-rm -f ./$(DEPDIR)/ssh2_echo.Po
+	-rm -f ./$(DEPDIR)/ssh2_exec.Po
+	-rm -f ./$(DEPDIR)/subsystem_netconf.Po
+	-rm -f ./$(DEPDIR)/tcpip-forward.Po
+	-rm -f ./$(DEPDIR)/x11.Po
 	-rm -f Makefile
 distclean-am: clean-am distclean-compile distclean-generic \
-	distclean-hdr distclean-libtool distclean-tags
+	distclean-hdr distclean-tags
 
 dvi: dvi-am
 
@@ -630,22 +817,64 @@ dvi-am:
 
 html: html-am
 
+html-am:
+
 info: info-am
 
 info-am:
 
 install-data-am:
 
+install-dvi: install-dvi-am
+
+install-dvi-am:
+
 install-exec-am:
 
+install-html: install-html-am
+
+install-html-am:
+
 install-info: install-info-am
 
+install-info-am:
+
 install-man:
 
+install-pdf: install-pdf-am
+
+install-pdf-am:
+
+install-ps: install-ps-am
+
+install-ps-am:
+
 installcheck-am:
 
 maintainer-clean: maintainer-clean-am
-	-rm -rf ./$(DEPDIR)
+		-rm -f ./$(DEPDIR)/direct_tcpip.Po
+	-rm -f ./$(DEPDIR)/scp.Po
+	-rm -f ./$(DEPDIR)/scp_nonblock.Po
+	-rm -f ./$(DEPDIR)/scp_write.Po
+	-rm -f ./$(DEPDIR)/scp_write_nonblock.Po
+	-rm -f ./$(DEPDIR)/sftp.Po
+	-rm -f ./$(DEPDIR)/sftp_RW_nonblock.Po
+	-rm -f ./$(DEPDIR)/sftp_append.Po
+	-rm -f ./$(DEPDIR)/sftp_mkdir.Po
+	-rm -f ./$(DEPDIR)/sftp_mkdir_nonblock.Po
+	-rm -f ./$(DEPDIR)/sftp_nonblock.Po
+	-rm -f ./$(DEPDIR)/sftp_write.Po
+	-rm -f ./$(DEPDIR)/sftp_write_nonblock.Po
+	-rm -f ./$(DEPDIR)/sftp_write_sliding.Po
+	-rm -f ./$(DEPDIR)/sftpdir.Po
+	-rm -f ./$(DEPDIR)/sftpdir_nonblock.Po
+	-rm -f ./$(DEPDIR)/ssh2.Po
+	-rm -f ./$(DEPDIR)/ssh2_agent.Po
+	-rm -f ./$(DEPDIR)/ssh2_echo.Po
+	-rm -f ./$(DEPDIR)/ssh2_exec.Po
+	-rm -f ./$(DEPDIR)/subsystem_netconf.Po
+	-rm -f ./$(DEPDIR)/tcpip-forward.Po
+	-rm -f ./$(DEPDIR)/x11.Po
 	-rm -f Makefile
 maintainer-clean-am: distclean-am maintainer-clean-generic
 
@@ -662,19 +891,26 @@ ps: ps-am
 
 ps-am:
 
-uninstall-am: uninstall-info-am
+uninstall-am:
 
-.PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \
-	clean-libtool clean-noinstPROGRAMS ctags distclean \
-	distclean-compile distclean-generic distclean-hdr \
-	distclean-libtool distclean-tags distdir dvi dvi-am html \
-	html-am info info-am install install-am install-data \
-	install-data-am install-exec install-exec-am install-info \
-	install-info-am install-man install-strip installcheck \
-	installcheck-am installdirs maintainer-clean \
+.MAKE: all install-am install-strip
+
+.PHONY: CTAGS GTAGS TAGS all all-am am--depfiles check check-am clean \
+	clean-generic clean-libtool clean-noinstPROGRAMS cscopelist-am \
+	ctags ctags-am distclean distclean-compile distclean-generic \
+	distclean-hdr distclean-libtool distclean-tags distdir dvi \
+	dvi-am html html-am info info-am install install-am \
+	install-data install-data-am install-dvi install-dvi-am \
+	install-exec install-exec-am install-html install-html-am \
+	install-info install-info-am install-man install-pdf \
+	install-pdf-am install-ps install-ps-am install-strip \
+	installcheck installcheck-am installdirs maintainer-clean \
 	maintainer-clean-generic mostlyclean mostlyclean-compile \
 	mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
-	tags uninstall uninstall-am uninstall-info-am
+	tags tags-am uninstall uninstall-am
+
+.PRECIOUS: Makefile
+
 
 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.

example/direct_tcpip.c

@@ -15,10 +15,13 @@
 #include <fcntl.h>
 #include <errno.h>
 #include <stdio.h>
+#ifdef HAVE_STDLIB_H
 #include <stdlib.h>
+#endif
+#ifdef HAVE_UNISTD_H
 #include <unistd.h>
+#endif
 #include <sys/types.h>
-
 #ifdef HAVE_SYS_SELECT_H
 #include <sys/select.h>
 #endif
@@ -48,7 +51,7 @@ enum {
 
 int main(int argc, char *argv[])
 {
-    int rc, sock = -1, listensock = -1, forwardsock = -1, i, auth = AUTH_NONE;
+    int rc, i, auth = AUTH_NONE;
     struct sockaddr_in sin;
     socklen_t sinlen;
     const char *fingerprint;
@@ -64,11 +67,19 @@ int main(int argc, char *argv[])
 
 #ifdef WIN32
     char sockopt;
+    SOCKET sock = INVALID_SOCKET;
+    SOCKET listensock = INVALID_SOCKET, forwardsock = INVALID_SOCKET;
     WSADATA wsadata;
+    int err;
 
-    WSAStartup(MAKEWORD(2,0), &wsadata);
+    err = WSAStartup(MAKEWORD(2,0), &wsadata);
+    if (err != 0) {
+        fprintf(stderr, "WSAStartup failed with error: %d\n", err);
+        return 1;
+    }
 #else
-    int sockopt;
+    int sockopt, sock = -1;
+    int listensock = -1, forwardsock = -1;
 #endif
 
     if (argc > 1)
@@ -94,6 +105,18 @@ int main(int argc, char *argv[])
 
     /* Connect to SSH server */
     sock = socket(PF_INET, SOCK_STREAM, IPPROTO_TCP);
+#ifdef WIN32
+    if (sock == INVALID_SOCKET) {
+        fprintf(stderr, "failed to open socket!\n");
+        return -1;
+    }
+#else
+    if (sock == -1) {
+        perror("socket");
+        return -1;
+    }
+#endif
+
     sin.sin_family = AF_INET;
     if (INADDR_NONE == (sin.sin_addr.s_addr = inet_addr(server_ip))) {
         perror("inet_addr");
@@ -135,7 +158,7 @@ int main(int argc, char *argv[])
 
     /* check what authentication methods are available */
     userauthlist = libssh2_userauth_list(session, username, strlen(username));
-    printf("Authentication methods: %s\n", userauthlist);
+    fprintf(stderr, "Authentication methods: %s\n", userauthlist);
     if (strstr(userauthlist, "password"))
         auth |= AUTH_PASSWORD;
     if (strstr(userauthlist, "publickey"))
@@ -157,16 +180,28 @@ int main(int argc, char *argv[])
     } else if (auth & AUTH_PUBLICKEY) {
         if (libssh2_userauth_publickey_fromfile(session, username, keyfile1,
                                                 keyfile2, password)) {
-            printf("\tAuthentication by public key failed!\n");
+            fprintf(stderr, "\tAuthentication by public key failed!\n");
             goto shutdown;
         }
-        printf("\tAuthentication by public key succeeded.\n");
+        fprintf(stderr, "\tAuthentication by public key succeeded.\n");
     } else {
-        printf("No supported authentication methods found!\n");
+        fprintf(stderr, "No supported authentication methods found!\n");
         goto shutdown;
     }
 
     listensock = socket(PF_INET, SOCK_STREAM, IPPROTO_TCP);
+#ifdef WIN32
+    if (listensock == INVALID_SOCKET) {
+        fprintf(stderr, "failed to open listen socket!\n");
+        return -1;
+    }
+#else
+    if (listensock == -1) {
+        perror("socket");
+        return -1;
+    }
+#endif
+
     sin.sin_family = AF_INET;
     sin.sin_port = htons(local_listenport);
     if (INADDR_NONE == (sin.sin_addr.s_addr = inet_addr(local_listenip))) {
@@ -185,20 +220,27 @@ int main(int argc, char *argv[])
         goto shutdown;
     }
 
-    printf("Waiting for TCP connection on %s:%d...\n",
+    fprintf(stderr, "Waiting for TCP connection on %s:%d...\n",
         inet_ntoa(sin.sin_addr), ntohs(sin.sin_port));
 
     forwardsock = accept(listensock, (struct sockaddr *)&sin, &sinlen);
-    if (-1 == forwardsock) {
+#ifdef WIN32
+    if (forwardsock == INVALID_SOCKET) {
+        fprintf(stderr, "failed to accept forward socket!\n");
+        goto shutdown;
+    }
+#else
+    if (forwardsock == -1) {
         perror("accept");
         goto shutdown;
     }
+#endif
 
     shost = inet_ntoa(sin.sin_addr);
     sport = ntohs(sin.sin_port);
 
-    printf("Forwarding connection from %s:%d here to remote %s:%d\n", shost,
-        sport, remote_desthost, remote_destport);
+    fprintf(stderr, "Forwarding connection from %s:%d here to remote %s:%d\n",
+        shost, sport, remote_desthost, remote_destport);
 
     channel = libssh2_channel_direct_tcpip_ex(session, remote_desthost,
         remote_destport, shost, sport);
@@ -228,18 +270,22 @@ int main(int argc, char *argv[])
                 perror("read");
                 goto shutdown;
             } else if (0 == len) {
-                printf("The client at %s:%d disconnected!\n", shost, sport);
+                fprintf(stderr, "The client at %s:%d disconnected!\n", shost,
+                    sport);
                 goto shutdown;
             }
             wr = 0;
-            do {
-                i = libssh2_channel_write(channel, buf, len);
+            while(wr < len) {
+                i = libssh2_channel_write(channel, buf + wr, len - wr);
+                if (LIBSSH2_ERROR_EAGAIN == i) {
+                    continue;
+                }
                 if (i < 0) {
                     fprintf(stderr, "libssh2_channel_write: %d\n", i);
                     goto shutdown;
                 }
                 wr += i;
-            } while(i > 0 && wr < len);
+            }
         }
         while (1) {
             len = libssh2_channel_read(channel, buf, sizeof(buf));
@@ -259,7 +305,7 @@ int main(int argc, char *argv[])
                 wr += i;
             }
             if (libssh2_channel_eof(channel)) {
-                printf("The server at %s:%d disconnected!\n",
+                fprintf(stderr, "The server at %s:%d disconnected!\n",
                     remote_desthost, remote_destport);
                 goto shutdown;
             }

example/libssh2_config.h.in

@@ -21,6 +21,10 @@
 /* Define to 1 if you have the <arpa/inet.h> header file. */
 #undef HAVE_ARPA_INET_H
 
+/* Define to 1 if you have the declaration of `SecureZeroMemory', and to 0 if
+   you don't. */
+#undef HAVE_DECL_SECUREZEROMEMORY
+
 /* disabled non-blocking sockets */
 #undef HAVE_DISABLED_NONBLOCKING
 
@@ -51,9 +55,18 @@
 /* use Ioctlsocket() for non-blocking sockets */
 #undef HAVE_IOCTLSOCKET_CASE
 
+/* Define if you have the bcrypt library. */
+#undef HAVE_LIBBCRYPT
+
+/* Define if you have the crypt32 library. */
+#undef HAVE_LIBCRYPT32
+
 /* Define if you have the gcrypt library. */
 #undef HAVE_LIBGCRYPT
 
+/* Define if you have the mbedcrypto library. */
+#undef HAVE_LIBMBEDCRYPTO
+
 /* Define if you have the ssl library. */
 #undef HAVE_LIBSSL
 
@@ -66,9 +79,18 @@
 /* Define to 1 if you have the <memory.h> header file. */
 #undef HAVE_MEMORY_H
 
+/* Define to 1 if you have the `memset_s' function. */
+#undef HAVE_MEMSET_S
+
 /* Define to 1 if you have the <netinet/in.h> header file. */
 #undef HAVE_NETINET_IN_H
 
+/* Define to 1 if you have the <ntdef.h> header file. */
+#undef HAVE_NTDEF_H
+
+/* Define to 1 if you have the <ntstatus.h> header file. */
+#undef HAVE_NTSTATUS_H
+
 /* use O_NONBLOCK for non-blocking sockets */
 #undef HAVE_O_NONBLOCK
 
@@ -138,6 +160,9 @@
 /* to make a symbol visible */
 #undef LIBSSH2_API
 
+/* Enable clearing of memory before being freed */
+#undef LIBSSH2_CLEAR_MEMORY
+
 /* Enable "none" cipher -- NOT RECOMMENDED */
 #undef LIBSSH2_CRYPT_NONE
 
@@ -153,8 +178,16 @@
 /* Enable "none" MAC -- NOT RECOMMENDED */
 #undef LIBSSH2_MAC_NONE
 
-/* Define to the sub-directory in which libtool stores uninstalled libraries.
-   */
+/* Use mbedtls */
+#undef LIBSSH2_MBEDTLS
+
+/* Use openssl */
+#undef LIBSSH2_OPENSSL
+
+/* Use wincng */
+#undef LIBSSH2_WINCNG
+
+/* Define to the sub-directory where libtool stores uninstalled libraries. */
 #undef LT_OBJDIR
 
 /* Define to 1 if _REENTRANT preprocessor symbol must be defined. */
@@ -207,6 +240,11 @@
 # endif
 #endif
 
+/* Enable large inode numbers on Mac OS X 10.5.  */
+#ifndef _DARWIN_USE_64_BIT_INODE
+# define _DARWIN_USE_64_BIT_INODE 1
+#endif
+
 /* Number of bits in a file offset, on hosts where this is settable. */
 #undef _FILE_OFFSET_BITS
 
@@ -221,3 +259,6 @@
 #ifndef __cplusplus
 #undef inline
 #endif
+
+/* Define to `unsigned int' if <sys/types.h> does not define. */
+#undef size_t

example/libssh2_config_cmake.h.in

@@ -0,0 +1,72 @@
+/* Copyright (c) 2014 Alexander Lamaison <alexander.lamaison@gmail.com>
+ *
+ * Redistribution and use in source and binary forms,
+ * with or without modification, are permitted provided
+ * that the following conditions are met:
+ *
+ *   Redistributions of source code must retain the above
+ *   copyright notice, this list of conditions and the
+ *   following disclaimer.
+ *
+ *   Redistributions in binary form must reproduce the above
+ *   copyright notice, this list of conditions and the following
+ *   disclaimer in the documentation and/or other materials
+ *   provided with the distribution.
+ *
+ *   Neither the name of the copyright holder nor the names
+ *   of any other contributors may be used to endorse or
+ *   promote products derived from this software without
+ *   specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+ * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
+ * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
+ * OF SUCH DAMAGE.
+ */
+
+/* Headers */
+#cmakedefine HAVE_UNISTD_H
+#cmakedefine HAVE_INTTYPES_H
+#cmakedefine HAVE_STDLIB_H
+#cmakedefine HAVE_SYS_SELECT_H
+#cmakedefine HAVE_SYS_SOCKET_H
+#cmakedefine HAVE_SYS_TIME_H
+#cmakedefine HAVE_ARPA_INET_H
+#cmakedefine HAVE_NETINET_IN_H
+#cmakedefine HAVE_WINSOCK2_H
+
+/* Functions */
+#cmakedefine HAVE_STRCASECMP
+#cmakedefine HAVE__STRICMP
+#cmakedefine HAVE_SNPRINTF
+#cmakedefine HAVE__SNPRINTF
+
+/* Workaround for platforms without POSIX strcasecmp (e.g. Windows) */
+#ifndef HAVE_STRCASECMP
+# ifdef HAVE__STRICMP
+# define strcasecmp _stricmp
+# define HAVE_STRCASECMP
+# endif
+#endif
+
+/* Symbols */
+#cmakedefine HAVE___FUNC__
+#cmakedefine HAVE___FUNCTION__
+
+/* Workaround for platforms without C90 __func__ */
+#ifndef HAVE___FUNC__
+# ifdef HAVE___FUNCTION__
+# define __func__ __FUNCTION__
+# define HAVE___FUNC__
+# endif
+#endif

example/scp.c

@@ -41,14 +41,19 @@ int main(int argc, char *argv[])
     const char *username="username";
     const char *password="password";
     const char *scppath="/tmp/TEST";
-    struct stat fileinfo;
+    libssh2_struct_stat fileinfo;
     int rc;
-    off_t got=0;
+    libssh2_struct_stat_size got = 0;
 
 #ifdef WIN32
     WSADATA wsadata;
+    int err;
 
-    WSAStartup(MAKEWORD(2,0), &wsadata);
+    err = WSAStartup(MAKEWORD(2,0), &wsadata);
+    if (err != 0) {
+        fprintf(stderr, "WSAStartup failed with error: %d\n", err);
+        return 1;
+    }
 #endif
 
     if (argc > 1) {
@@ -132,7 +137,7 @@ int main(int argc, char *argv[])
     }
 
     /* Request a file via SCP */
-    channel = libssh2_scp_recv(session, scppath, &fileinfo);
+    channel = libssh2_scp_recv2(session, scppath, &fileinfo);
 
     if (!channel) {
         fprintf(stderr, "Unable to open a session: %d\n",
@@ -146,7 +151,7 @@ int main(int argc, char *argv[])
         int amount=sizeof(mem);
 
         if((fileinfo.st_size -got) < amount) {
-            amount = fileinfo.st_size -got;
+            amount = (int)(fileinfo.st_size -got);
         }
 
         rc = libssh2_channel_read(channel, mem, amount);

example/scp_nonblock.c

@@ -38,12 +38,14 @@
 #include <stdio.h>
 #include <ctype.h>
 
+#ifdef HAVE_GETTIMEOFDAY
 /* diff in ms */
 static long tvdiff(struct timeval newer, struct timeval older)
 {
   return (newer.tv_sec-older.tv_sec)*1000+
       (newer.tv_usec-older.tv_usec)/1000;
 }
+#endif
 
 static int waitsocket(int socket_fd, LIBSSH2_SESSION *session)
 {
@@ -86,19 +88,26 @@ int main(int argc, char *argv[])
     const char *username="username";
     const char *password="password";
     const char *scppath="/tmp/TEST";
-    struct stat fileinfo;
+    libssh2_struct_stat fileinfo;
+#ifdef HAVE_GETTIMEOFDAY
     struct timeval start;
     struct timeval end;
-    int rc;
-    int total = 0;
     long time_ms;
+#endif
+    int rc;
     int spin = 0;
-    off_t got=0;
+    libssh2_struct_stat_size got = 0;
+    libssh2_struct_stat_size total = 0;
 
 #ifdef WIN32
     WSADATA wsadata;
+    int err;
 
-    WSAStartup(MAKEWORD(2,0), &wsadata);
+    err = WSAStartup(MAKEWORD(2,0), &wsadata);
+    if (err != 0) {
+        fprintf(stderr, "WSAStartup failed with error: %d\n", err);
+        return 1;
+    }
 #endif
 
     if (argc > 1) {
@@ -144,7 +153,9 @@ int main(int argc, char *argv[])
     /* Since we have set non-blocking, tell libssh2 we are non-blocking */
     libssh2_session_set_blocking(session, 0);
 
+#ifdef HAVE_GETTIMEOFDAY
     gettimeofday(&start, NULL);
+#endif
 
     /* ... start it up. This will trade welcome banners, exchange keys,
      * and setup crypto, compression, and MAC layers
@@ -196,9 +207,9 @@ int main(int argc, char *argv[])
 #endif
 
     /* Request a file via SCP */
-    fprintf(stderr, "libssh2_scp_recv()!\n");
+    fprintf(stderr, "libssh2_scp_recv2()!\n");
     do {
-        channel = libssh2_scp_recv(session, scppath, &fileinfo);
+        channel = libssh2_scp_recv2(session, scppath, &fileinfo);
 
         if (!channel) {
             if(libssh2_session_last_errno(session) != LIBSSH2_ERROR_EAGAIN) {
@@ -224,7 +235,7 @@ int main(int argc, char *argv[])
             int amount=sizeof(mem);
 
             if ((fileinfo.st_size -got) < amount) {
-                amount = fileinfo.st_size - got;
+                amount = (int)(fileinfo.st_size - got);
             }
 
             /* loop until we block */
@@ -247,11 +258,15 @@ int main(int argc, char *argv[])
         break;
     }
 
+#ifdef HAVE_GETTIMEOFDAY
     gettimeofday(&end, NULL);
 
     time_ms = tvdiff(end, start);
-    printf("Got %d bytes in %ld ms = %.1f bytes/sec spin: %d\n", total,
-           time_ms, total/(time_ms/1000.0), spin );
+    fprintf(stderr, "Got " LIBSSH2_STRUCT_STAT_SIZE_FORMAT " bytes in %ld ms = %.1f bytes/sec spin: %d\n", total,
+           time_ms, total/(time_ms/1000.0), spin);
+#else
+    fprintf(stderr, "Got " LIBSSH2_STRUCT_STAT_SIZE_FORMAT " bytes spin: %d\n", total, spin);
+#endif
 
     libssh2_channel_free(channel);
     channel = NULL;

example/scp_write.c

@@ -51,8 +51,13 @@ int main(int argc, char *argv[])
 
 #ifdef WIN32
     WSADATA wsadata;
+    int err;
 
-    WSAStartup(MAKEWORD(2,0), &wsadata);
+    err = WSAStartup(MAKEWORD(2,0), &wsadata);
+    if (err != 0) {
+        fprintf(stderr, "WSAStartup failed with error: %d\n", err);
+        return 1;
+    }
 #endif
 
     if (argc > 1) {

example/scp_write_nonblock.c

@@ -90,8 +90,13 @@ int main(int argc, char *argv[])
 
 #ifdef WIN32
     WSADATA wsadata;
+    int err;
 
-    WSAStartup(MAKEWORD(2,0), &wsadata);
+    err = WSAStartup(MAKEWORD(2,0), &wsadata);
+    if (err != 0) {
+        fprintf(stderr, "WSAStartup failed with error: %d\n", err);
+        return 1;
+    }
 #endif
 
     if (argc > 1) {
@@ -243,7 +248,7 @@ int main(int argc, char *argv[])
 
     duration = (int)(time(NULL)-start);
 
-    printf("%ld bytes in %d seconds makes %.1f bytes/sec\n",
+    fprintf(stderr, "%ld bytes in %d seconds makes %.1f bytes/sec\n",
            total, duration, total/(double)duration);
 
     fprintf(stderr, "Sending EOF\n");

example/sftp.c

@@ -55,24 +55,24 @@ static void kbd_callback(const char *name, int name_len,
     char buf[1024];
     (void)abstract;
 
-    printf("Performing keyboard-interactive authentication.\n");
+    fprintf(stderr, "Performing keyboard-interactive authentication.\n");
 
-    printf("Authentication name: '");
-    fwrite(name, 1, name_len, stdout);
-    printf("'\n");
+    fprintf(stderr, "Authentication name: '");
+    fwrite(name, 1, name_len, stderr);
+    fprintf(stderr, "'\n");
 
-    printf("Authentication instruction: '");
-    fwrite(instruction, 1, instruction_len, stdout);
-    printf("'\n");
+    fprintf(stderr, "Authentication instruction: '");
+    fwrite(instruction, 1, instruction_len, stderr);
+    fprintf(stderr, "'\n");
 
-    printf("Number of prompts: %d\n\n", num_prompts);
+    fprintf(stderr, "Number of prompts: %d\n\n", num_prompts);
 
     for (i = 0; i < num_prompts; i++) {
-        printf("Prompt %d from server: '", i);
-        fwrite(prompts[i].text, 1, prompts[i].length, stdout);
-        printf("'\n");
+        fprintf(stderr, "Prompt %d from server: '", i);
+        fwrite(prompts[i].text, 1, prompts[i].length, stderr);
+        fprintf(stderr, "'\n");
 
-        printf("Please type response: ");
+        fprintf(stderr, "Please type response: ");
         fgets(buf, sizeof(buf), stdin);
         n = strlen(buf);
         while (n > 0 && strchr("\r\n", buf[n - 1]))
@@ -82,12 +82,13 @@ static void kbd_callback(const char *name, int name_len,
         responses[i].text = strdup(buf);
         responses[i].length = n;
 
-        printf("Response %d from user is '", i);
-        fwrite(responses[i].text, 1, responses[i].length, stdout);
-        printf("'\n\n");
+        fprintf(stderr, "Response %d from user is '", i);
+        fwrite(responses[i].text, 1, responses[i].length, stderr);
+        fprintf(stderr, "'\n\n");
     }
 
-    printf("Done. Sending keyboard-interactive responses to server now.\n");
+    fprintf(stderr,
+        "Done. Sending keyboard-interactive responses to server now.\n");
 }
 
 
@@ -105,8 +106,13 @@ int main(int argc, char *argv[])
 
 #ifdef WIN32
     WSADATA wsadata;
+    int err;
 
-    WSAStartup(MAKEWORD(2,0), &wsadata);
+    err = WSAStartup(MAKEWORD(2,0), &wsadata);
+    if (err != 0) {
+        fprintf(stderr, "WSAStartup failed with error: %d\n", err);
+        return 1;
+    }
 #endif
 
     if (argc > 1) {
@@ -127,7 +133,7 @@ int main(int argc, char *argv[])
 
     rc = libssh2_init (0);
     if (rc != 0) {
-        fprintf (stderr, "libssh2 initialization failed (%d)\n", rc);
+        fprintf(stderr, "libssh2 initialization failed (%d)\n", rc);
         return 1;
     }
 
@@ -178,7 +184,7 @@ int main(int argc, char *argv[])
 
     /* check what authentication methods are available */
     userauthlist = libssh2_userauth_list(session, username, strlen(username));
-    printf("Authentication methods: %s\n", userauthlist);
+    fprintf(stderr, "Authentication methods: %s\n", userauthlist);
     if (strstr(userauthlist, "password") != NULL) {
         auth_pw |= 1;
     }
@@ -211,21 +217,23 @@ int main(int argc, char *argv[])
     } else if (auth_pw & 2) {
         /* Or via keyboard-interactive */
         if (libssh2_userauth_keyboard_interactive(session, username, &kbd_callback) ) {
-            printf("\tAuthentication by keyboard-interactive failed!\n");
+            fprintf(stderr,
+                "\tAuthentication by keyboard-interactive failed!\n");
             goto shutdown;
         } else {
-            printf("\tAuthentication by keyboard-interactive succeeded.\n");
+            fprintf(stderr,
+                "\tAuthentication by keyboard-interactive succeeded.\n");
         }
     } else if (auth_pw & 4) {
         /* Or by public key */
         if (libssh2_userauth_publickey_fromfile(session, username, keyfile1, keyfile2, password)) {
-            printf("\tAuthentication by public key failed!\n");
+            fprintf(stderr, "\tAuthentication by public key failed!\n");
             goto shutdown;
         } else {
-            printf("\tAuthentication by public key succeeded.\n");
+            fprintf(stderr, "\tAuthentication by public key succeeded.\n");
         }
     } else {
-        printf("No supported authentication methods found!\n");
+        fprintf(stderr, "No supported authentication methods found!\n");
         goto shutdown;
     }
 

example/sftp_RW_nonblock.c

@@ -93,8 +93,13 @@ int main(int argc, char *argv[])
 
 #ifdef WIN32
     WSADATA wsadata;
+    int err;
 
-    WSAStartup(MAKEWORD(2,0), &wsadata);
+    err = WSAStartup(MAKEWORD(2,0), &wsadata);
+    if (err != 0) {
+        fprintf(stderr, "WSAStartup failed with error: %d\n", err);
+        return 1;
+    }
 #endif
 
     rc = libssh2_init (0);
@@ -141,11 +146,11 @@ int main(int argc, char *argv[])
      * user, that's your call
      */
     fingerprint = libssh2_hostkey_hash(session, LIBSSH2_HOSTKEY_HASH_SHA1);
-    printf("Fingerprint: ");
+    fprintf(stderr, "Fingerprint: ");
     for(i = 0; i < 20; i++) {
-        printf("%02X ", (unsigned char)fingerprint[i]);
+        fprintf(stderr, "%02X ", (unsigned char)fingerprint[i]);
     }
-    printf("\n");
+    fprintf(stderr, "\n");
 
     if(argc > 1) {
         username = argv[1];
@@ -162,7 +167,7 @@ int main(int argc, char *argv[])
 
     tempstorage = fopen(STORAGE, "wb");
     if(!tempstorage) {
-        printf("Can't open temp storage file %s\n", STORAGE);
+        fprintf(stderr, "Can't open temp storage file %s\n", STORAGE);
         goto shutdown;
     }
 
@@ -171,7 +176,7 @@ int main(int argc, char *argv[])
         while ((rc = libssh2_userauth_password(session, username, password))
                == LIBSSH2_ERROR_EAGAIN);
         if (rc) {
-            printf("Authentication by password failed.\n");
+            fprintf(stderr, "Authentication by password failed.\n");
             goto shutdown;
         }
     } else {
@@ -185,7 +190,7 @@ int main(int argc, char *argv[])
                                                     password)) ==
                LIBSSH2_ERROR_EAGAIN);
         if (rc) {
-            printf("\tAuthentication by public key failed\n");
+            fprintf(stderr, "\tAuthentication by public key failed\n");
             goto shutdown;
         }
     }
@@ -341,7 +346,7 @@ int main(int argc, char *argv[])
 #endif
     if (tempstorage)
         fclose(tempstorage);
-    printf("all done\n");
+    fprintf(stderr, "all done\n");
 
     libssh2_exit();
 

example/sftp_append.c

@@ -55,8 +55,13 @@ int main(int argc, char *argv[])
 
 #ifdef WIN32
     WSADATA wsadata;
+    int err;
 
-    WSAStartup(MAKEWORD(2,0), &wsadata);
+    err = WSAStartup(MAKEWORD(2,0), &wsadata);
+    if (err != 0) {
+        fprintf(stderr, "WSAStartup failed with error: %d\n", err);
+        return 1;
+    }
 #endif
 
     if (argc > 1) {
@@ -86,7 +91,7 @@ int main(int argc, char *argv[])
 
     local = fopen(loclfile, "rb");
     if (!local) {
-        printf("Can't local file %s\n", loclfile);
+        fprintf(stderr, "Can't open local file %s\n", loclfile);
         return -1;
     }
 
@@ -129,16 +134,16 @@ int main(int argc, char *argv[])
      * user, that's your call
      */
     fingerprint = libssh2_hostkey_hash(session, LIBSSH2_HOSTKEY_HASH_SHA1);
-    printf("Fingerprint: ");
+    fprintf(stderr, "Fingerprint: ");
     for(i = 0; i < 20; i++) {
-        printf("%02X ", (unsigned char)fingerprint[i]);
+        fprintf(stderr, "%02X ", (unsigned char)fingerprint[i]);
     }
-    printf("\n");
+    fprintf(stderr, "\n");
 
     if (auth_pw) {
         /* We could authenticate via password */
         if (libssh2_userauth_password(session, username, password)) {
-            printf("Authentication by password failed.\n");
+            fprintf(stderr, "Authentication by password failed.\n");
             goto shutdown;
         }
     } else {
@@ -147,7 +152,7 @@ int main(int argc, char *argv[])
                             "/home/username/.ssh/id_rsa.pub",
                             "/home/username/.ssh/id_rsa",
                             password)) {
-            printf("\tAuthentication by public key failed\n");
+            fprintf(stderr, "\tAuthentication by public key failed\n");
             goto shutdown;
         }
     }
@@ -174,12 +179,12 @@ int main(int argc, char *argv[])
     }
 
     if(libssh2_sftp_fstat_ex(sftp_handle, &attrs, 0) < 0) {
-        printf("libssh2_sftp_fstat_ex failed\n");
+        fprintf(stderr, "libssh2_sftp_fstat_ex failed\n");
         goto shutdown;
     }
     else
         libssh2_sftp_seek64(sftp_handle, attrs.filesize);
-    printf("Did a seek to position %ld\n", (long) attrs.filesize);
+    fprintf(stderr, "Did a seek to position %ld\n", (long) attrs.filesize);
 
     fprintf(stderr, "libssh2_sftp_open() a handle for APPEND\n");
 
@@ -222,7 +227,7 @@ shutdown:
 #endif
     if (local)
         fclose(local);
-    printf("all done\n");
+    fprintf(stderr, "all done\n");
 
     libssh2_exit();
 

example/sftp_mkdir.c

@@ -48,8 +48,13 @@ int main(int argc, char *argv[])
 
 #ifdef WIN32
     WSADATA wsadata;
+    int err;
 
-    WSAStartup(MAKEWORD(2,0), &wsadata);
+    err = WSAStartup(MAKEWORD(2,0), &wsadata);
+    if (err != 0) {
+        fprintf(stderr, "WSAStartup failed with error: %d\n", err);
+        return 1;
+    }
 #endif
 
     if (argc > 1) {
@@ -110,16 +115,16 @@ int main(int argc, char *argv[])
      * user, that's your call
      */
     fingerprint = libssh2_hostkey_hash(session, LIBSSH2_HOSTKEY_HASH_SHA1);
-    printf("Fingerprint: ");
+    fprintf(stderr, "Fingerprint: ");
     for(i = 0; i < 20; i++) {
-        printf("%02X ", (unsigned char)fingerprint[i]);
+        fprintf(stderr, "%02X ", (unsigned char)fingerprint[i]);
     }
-    printf("\n");
+    fprintf(stderr, "\n");
 
     if (auth_pw) {
         /* We could authenticate via password */
         if (libssh2_userauth_password(session, username, password)) {
-            printf("Authentication by password failed.\n");
+            fprintf(stderr, "Authentication by password failed.\n");
             goto shutdown;
         }
     } else {
@@ -128,7 +133,7 @@ int main(int argc, char *argv[])
                             "/home/username/.ssh/id_rsa.pub",
                             "/home/username/.ssh/id_rsa",
                             password)) {
-            printf("\tAuthentication by public key failed\n");
+            fprintf(stderr, "\tAuthentication by public key failed\n");
             goto shutdown;
         }
     }
@@ -164,7 +169,7 @@ int main(int argc, char *argv[])
 #else
     close(sock);
 #endif
-    printf("all done\n");
+    fprintf(stderr, "all done\n");
 
     libssh2_exit();
 

example/sftp_mkdir_nonblock.c

@@ -48,8 +48,13 @@ int main(int argc, char *argv[])
 
 #ifdef WIN32
     WSADATA wsadata;
+    int err;
 
-    WSAStartup(MAKEWORD(2,0), &wsadata);
+    err = WSAStartup(MAKEWORD(2,0), &wsadata);
+    if (err != 0) {
+        fprintf(stderr, "WSAStartup failed with error: %d\n", err);
+        return 1;
+    }
 #endif
 
     if (argc > 1) {
@@ -110,16 +115,16 @@ int main(int argc, char *argv[])
      * user, that's your call
      */
     fingerprint = libssh2_hostkey_hash(session, LIBSSH2_HOSTKEY_HASH_SHA1);
-    printf("Fingerprint: ");
+    fprintf(stderr, "Fingerprint: ");
     for(i = 0; i < 20; i++) {
-        printf("%02X ", (unsigned char)fingerprint[i]);
+        fprintf(stderr, "%02X ", (unsigned char)fingerprint[i]);
     }
-    printf("\n");
+    fprintf(stderr, "\n");
 
     if (auth_pw) {
         /* We could authenticate via password */
         if (libssh2_userauth_password(session, username, password)) {
-            printf("Authentication by password failed.\n");
+            fprintf(stderr, "Authentication by password failed.\n");
             goto shutdown;
         }
     } else {
@@ -128,7 +133,7 @@ int main(int argc, char *argv[])
                             "/home/username/.ssh/id_rsa.pub",
                             "/home/username/.ssh/id_rsa",
                             password)) {
-            printf("\tAuthentication by public key failed\n");
+            fprintf(stderr, "\tAuthentication by public key failed\n");
             goto shutdown;
         }
     }
@@ -164,7 +169,7 @@ int main(int argc, char *argv[])
 #else
     close(sock);
 #endif
-    printf("all done\n");
+    fprintf(stderr, "all done\n");
 
     libssh2_exit();
 

example/sftp_nonblock.c

@@ -39,12 +39,14 @@
 #include <stdio.h>
 #include <ctype.h>
 
+#ifdef HAVE_GETTIMEOFDAY
 /* diff in ms */
 static long tvdiff(struct timeval newer, struct timeval older)
 {
   return (newer.tv_sec-older.tv_sec)*1000+
       (newer.tv_usec-older.tv_usec)/1000;
 }
+#endif
 
 static int waitsocket(int socket_fd, LIBSSH2_SESSION *session)
 {
@@ -86,19 +88,26 @@ int main(int argc, char *argv[])
     const char *username="username";
     const char *password="password";
     const char *sftppath="/tmp/TEST";
+#ifdef HAVE_GETTIMEOFDAY
     struct timeval start;
     struct timeval end;
+    long time_ms;
+#endif
     int rc;
     int total = 0;
-    long time_ms;
     int spin = 0;
     LIBSSH2_SFTP *sftp_session;
     LIBSSH2_SFTP_HANDLE *sftp_handle;
 
 #ifdef WIN32
     WSADATA wsadata;
+    int err;
 
-    WSAStartup(MAKEWORD(2,0), &wsadata);
+    err = WSAStartup(MAKEWORD(2,0), &wsadata);
+    if (err != 0) {
+        fprintf(stderr, "WSAStartup failed with error: %d\n", err);
+        return 1;
+    }
 #endif
 
     if (argc > 1) {
@@ -146,7 +155,9 @@ int main(int argc, char *argv[])
     /* Since we have set non-blocking, tell libssh2 we are non-blocking */
     libssh2_session_set_blocking(session, 0);
 
+#ifdef HAVE_GETTIMEOFDAY
     gettimeofday(&start, NULL);
+#endif
 
     /* ... start it up. This will trade welcome banners, exchange keys,
         * and setup crypto, compression, and MAC layers
@@ -249,17 +260,21 @@ int main(int argc, char *argv[])
         }
     } while (1);
 
+#ifdef HAVE_GETTIMEOFDAY
     gettimeofday(&end, NULL);
     time_ms = tvdiff(end, start);
-    printf("Got %d bytes in %ld ms = %.1f bytes/sec spin: %d\n", total,
+    fprintf(stderr, "Got %d bytes in %ld ms = %.1f bytes/sec spin: %d\n", total,
            time_ms, total/(time_ms/1000.0), spin );
+#else
+    fprintf(stderr, "Got %d bytes spin: %d\n", total, spin);
+#endif
 
     libssh2_sftp_close(sftp_handle);
     libssh2_sftp_shutdown(sftp_session);
 
 shutdown:
 
-    printf("libssh2_session_disconnect\n");
+    fprintf(stderr, "libssh2_session_disconnect\n");
     while (libssh2_session_disconnect(session,
                                       "Normal Shutdown, Thank you") ==
            LIBSSH2_ERROR_EAGAIN);

example/sftp_write.c

@@ -54,8 +54,13 @@ int main(int argc, char *argv[])
 
 #ifdef WIN32
     WSADATA wsadata;
+    int err;
 
-    WSAStartup(MAKEWORD(2,0), &wsadata);
+    err = WSAStartup(MAKEWORD(2,0), &wsadata);
+    if (err != 0) {
+        fprintf(stderr, "WSAStartup failed with error: %d\n", err);
+        return 1;
+    }
 #endif
 
     if (argc > 1) {
@@ -85,7 +90,7 @@ int main(int argc, char *argv[])
 
     local = fopen(loclfile, "rb");
     if (!local) {
-        printf("Can't local file %s\n", loclfile);
+        fprintf(stderr, "Can't open local file %s\n", loclfile);
         return -1;
     }
 
@@ -128,16 +133,16 @@ int main(int argc, char *argv[])
      * user, that's your call
      */
     fingerprint = libssh2_hostkey_hash(session, LIBSSH2_HOSTKEY_HASH_SHA1);
-    printf("Fingerprint: ");
+    fprintf(stderr, "Fingerprint: ");
     for(i = 0; i < 20; i++) {
-        printf("%02X ", (unsigned char)fingerprint[i]);
+        fprintf(stderr, "%02X ", (unsigned char)fingerprint[i]);
     }
-    printf("\n");
+    fprintf(stderr, "\n");
 
     if (auth_pw) {
         /* We could authenticate via password */
         if (libssh2_userauth_password(session, username, password)) {
-            printf("Authentication by password failed.\n");
+            fprintf(stderr, "Authentication by password failed.\n");
             goto shutdown;
         }
     } else {
@@ -146,7 +151,7 @@ int main(int argc, char *argv[])
                             "/home/username/.ssh/id_rsa.pub",
                             "/home/username/.ssh/id_rsa",
                             password)) {
-            printf("\tAuthentication by public key failed\n");
+            fprintf(stderr, "\tAuthentication by public key failed\n");
             goto shutdown;
         }
     }
@@ -206,7 +211,7 @@ shutdown:
 #endif
     if (local)
         fclose(local);
-    printf("all done\n");
+    fprintf(stderr, "all done\n");
 
     libssh2_exit();
 

example/sftp_write_nonblock.c

@@ -94,8 +94,13 @@ int main(int argc, char *argv[])
 
 #ifdef WIN32
     WSADATA wsadata;
+    int err;
 
-    WSAStartup(MAKEWORD(2,0), &wsadata);
+    err = WSAStartup(MAKEWORD(2,0), &wsadata);
+    if (err != 0) {
+        fprintf(stderr, "WSAStartup failed with error: %d\n", err);
+        return 1;
+    }
 #endif
 
     if (argc > 1) {
@@ -125,7 +130,7 @@ int main(int argc, char *argv[])
 
     local = fopen(loclfile, "rb");
     if (!local) {
-        printf("Can't local file %s\n", loclfile);
+        fprintf(stderr, "Can't open local file %s\n", loclfile);
         return -1;
     }
 
@@ -169,18 +174,18 @@ int main(int argc, char *argv[])
      * that's your call
      */
     fingerprint = libssh2_hostkey_hash(session, LIBSSH2_HOSTKEY_HASH_SHA1);
-    printf("Fingerprint: ");
+    fprintf(stderr, "Fingerprint: ");
     for(i = 0; i < 20; i++) {
-        printf("%02X ", (unsigned char)fingerprint[i]);
+        fprintf(stderr, "%02X ", (unsigned char)fingerprint[i]);
     }
-    printf("\n");
+    fprintf(stderr, "\n");
 
     if (auth_pw) {
         /* We could authenticate via password */
         while ((rc = libssh2_userauth_password(session, username, password)) ==
                LIBSSH2_ERROR_EAGAIN);
         if (rc) {
-            printf("Authentication by password failed.\n");
+            fprintf(stderr, "Authentication by password failed.\n");
             goto shutdown;
         }
     } else {
@@ -191,7 +196,7 @@ int main(int argc, char *argv[])
                                                          password)) ==
                LIBSSH2_ERROR_EAGAIN);
     if (rc) {
-            printf("\tAuthentication by public key failed\n");
+            fprintf(stderr, "\tAuthentication by public key failed\n");
             goto shutdown;
         }
     }
@@ -253,7 +258,7 @@ int main(int argc, char *argv[])
 
     duration = (int)(time(NULL)-start);
 
-    printf("%ld bytes in %d seconds makes %.1f bytes/sec\n",
+    fprintf(stderr, "%ld bytes in %d seconds makes %.1f bytes/sec\n",
            total, duration, total/(double)duration);
 
 
@@ -272,7 +277,7 @@ shutdown:
 #else
     close(sock);
 #endif
-    printf("all done\n");
+    fprintf(stderr, "all done\n");
 
     libssh2_exit();
 

example/sftp_write_sliding.c

@@ -94,8 +94,13 @@ int main(int argc, char *argv[])
 
 #ifdef WIN32
     WSADATA wsadata;
+    int err;
 
-    WSAStartup(MAKEWORD(2,0), &wsadata);
+    err = WSAStartup(MAKEWORD(2,0), &wsadata);
+    if (err != 0) {
+        fprintf(stderr, "WSAStartup failed with error: %d\n", err);
+        return 1;
+    }
 #endif
 
     if (argc > 1) {
@@ -125,7 +130,7 @@ int main(int argc, char *argv[])
 
     local = fopen(loclfile, "rb");
     if (!local) {
-        printf("Can't local file %s\n", loclfile);
+        fprintf(stderr, "Can't open local file %s\n", loclfile);
         return -1;
     }
 
@@ -169,18 +174,18 @@ int main(int argc, char *argv[])
      * that's your call
      */
     fingerprint = libssh2_hostkey_hash(session, LIBSSH2_HOSTKEY_HASH_SHA1);
-    printf("Fingerprint: ");
+    fprintf(stderr, "Fingerprint: ");
     for(i = 0; i < 20; i++) {
-        printf("%02X ", (unsigned char)fingerprint[i]);
+        fprintf(stderr, "%02X ", (unsigned char)fingerprint[i]);
     }
-    printf("\n");
+    fprintf(stderr, "\n");
 
     if (auth_pw) {
         /* We could authenticate via password */
         while ((rc = libssh2_userauth_password(session, username, password)) ==
                LIBSSH2_ERROR_EAGAIN);
         if (rc) {
-            printf("Authentication by password failed.\n");
+            fprintf(stderr, "Authentication by password failed.\n");
             goto shutdown;
         }
     } else {
@@ -191,7 +196,7 @@ int main(int argc, char *argv[])
                                                          password)) ==
                LIBSSH2_ERROR_EAGAIN);
     if (rc) {
-            printf("\tAuthentication by public key failed\n");
+            fprintf(stderr, "\tAuthentication by public key failed\n");
             goto shutdown;
         }
     }
@@ -262,7 +267,7 @@ int main(int argc, char *argv[])
 
     duration = (int)(time(NULL)-start);
 
-    printf("%ld bytes in %d seconds makes %.1f bytes/sec\n",
+    fprintf(stderr, "%ld bytes in %d seconds makes %.1f bytes/sec\n",
            total, duration, total/(double)duration);
 
 
@@ -281,7 +286,7 @@ shutdown:
 #else
     close(sock);
 #endif
-    printf("all done\n");
+    fprintf(stderr, "all done\n");
 
     libssh2_exit();
 

example/sftpdir.c

@@ -52,24 +52,51 @@
 #define PRIu64 __PRI64_PREFIX "u"
 #endif  /* PRIu64 */
 
+const char *keyfile1="~/.ssh/id_rsa.pub";
+const char *keyfile2="~/.ssh/id_rsa";
+const char *username="username";
+const char *password="password";
+
+static void kbd_callback(const char *name, int name_len,
+                         const char *instruction, int instruction_len,
+                         int num_prompts,
+                         const LIBSSH2_USERAUTH_KBDINT_PROMPT *prompts,
+                         LIBSSH2_USERAUTH_KBDINT_RESPONSE *responses,
+                         void **abstract)
+{
+    (void)name;
+    (void)name_len;
+    (void)instruction;
+    (void)instruction_len;
+    if (num_prompts == 1) {
+        responses[0].text = strdup(password);
+        responses[0].length = strlen(password);
+    }
+    (void)prompts;
+    (void)abstract;
+} /* kbd_callback */
+
 int main(int argc, char *argv[])
 {
     unsigned long hostaddr;
-    int sock, i, auth_pw = 1;
+    int rc, sock, i, auth_pw = 0;
     struct sockaddr_in sin;
     const char *fingerprint;
+    char *userauthlist;
     LIBSSH2_SESSION *session;
-    const char *username="username";
-    const char *password="password";
     const char *sftppath="/tmp/secretdir";
-    int rc;
     LIBSSH2_SFTP *sftp_session;
     LIBSSH2_SFTP_HANDLE *sftp_handle;
 
 #ifdef WIN32
     WSADATA wsadata;
+    int err;
 
-    WSAStartup(MAKEWORD(2,0), &wsadata);
+    err = WSAStartup(MAKEWORD(2,0), &wsadata);
+    if (err != 0) {
+        fprintf(stderr, "WSAStartup failed with error: %d\n", err);
+        return 1;
+    }
 #endif
 
     if (argc > 1) {
@@ -130,27 +157,69 @@ int main(int argc, char *argv[])
      * user, that's your call
      */
     fingerprint = libssh2_hostkey_hash(session, LIBSSH2_HOSTKEY_HASH_SHA1);
-    printf("Fingerprint: ");
+    fprintf(stderr, "Fingerprint: ");
     for(i = 0; i < 20; i++) {
-        printf("%02X ", (unsigned char)fingerprint[i]);
+        fprintf(stderr, "%02X ", (unsigned char)fingerprint[i]);
     }
-    printf("\n");
+    fprintf(stderr, "\n");
 
-    if (auth_pw) {
+    /* check what authentication methods are available */
+    userauthlist = libssh2_userauth_list(session, username, strlen(username));
+    fprintf(stderr, "Authentication methods: %s\n", userauthlist);
+    if (strstr(userauthlist, "password") != NULL) {
+        auth_pw |= 1;
+    }
+    if (strstr(userauthlist, "keyboard-interactive") != NULL) {
+        auth_pw |= 2;
+    }
+    if (strstr(userauthlist, "publickey") != NULL) {
+        auth_pw |= 4;
+    }
+
+    /* if we got an 5. argument we set this option if supported */
+    if(argc > 5) {
+        if ((auth_pw & 1) && !strcasecmp(argv[5], "-p")) {
+            auth_pw = 1;
+        }
+        if ((auth_pw & 2) && !strcasecmp(argv[5], "-i")) {
+            auth_pw = 2;
+        }
+        if ((auth_pw & 4) && !strcasecmp(argv[5], "-k")) {
+            auth_pw = 4;
+        }
+    }
+
+    if (auth_pw & 1) {
         /* We could authenticate via password */
         if (libssh2_userauth_password(session, username, password)) {
-            printf("Authentication by password failed.\n");
+            fprintf(stderr, "\tAuthentication by password failed!\n");
             goto shutdown;
+        } else {
+            fprintf(stderr, "\tAuthentication by password succeeded.\n");
+        }
+    } else if (auth_pw & 2) {
+        /* Or via keyboard-interactive */
+        if (libssh2_userauth_keyboard_interactive(session, username,
+                                                  &kbd_callback) ) {
+            fprintf(stderr,
+                "\tAuthentication by keyboard-interactive failed!\n");
+            goto shutdown;
+        } else {
+            fprintf(stderr,
+                "\tAuthentication by keyboard-interactive succeeded.\n");
+        }
+    } else if (auth_pw & 4) {
+        /* Or by public key */
+        if (libssh2_userauth_publickey_fromfile(session, username, keyfile1,
+                                                keyfile2, password)) {
+            fprintf(stderr, "\tAuthentication by public key failed!\n");
+            goto shutdown;
+        } else {
+            fprintf(stderr, "\tAuthentication by public key succeeded.\n");
         }
     } else {
-        /* Or by public key */
-        if (libssh2_userauth_publickey_fromfile(session, username,
-                            "/home/username/.ssh/id_rsa.pub",
-                            "/home/username/.ssh/id_rsa",
-                            password)) {
-            printf("\tAuthentication by public key failed\n");
-            goto shutdown;
-        }
+        fprintf(stderr, "No supported authentication methods found!\n");
+        goto shutdown;
     }
 
     fprintf(stderr, "libssh2_sftp_init()!\n");
@@ -229,7 +298,7 @@ int main(int argc, char *argv[])
 #else
     close(sock);
 #endif
-    printf("all done\n");
+    fprintf(stderr, "all done\n");
 
     libssh2_exit();
 

example/sftpdir_nonblock.c

@@ -68,8 +68,13 @@ int main(int argc, char *argv[])
 
 #ifdef WIN32
     WSADATA wsadata;
+    int err;
 
-    WSAStartup(MAKEWORD(2,0), &wsadata);
+    err = WSAStartup(MAKEWORD(2,0), &wsadata);
+    if (err != 0) {
+        fprintf(stderr, "WSAStartup failed with error: %d\n", err);
+        return 1;
+    }
 #endif
 
     if (argc > 1) {
@@ -134,11 +139,11 @@ int main(int argc, char *argv[])
      * user, that's your call
      */
     fingerprint = libssh2_hostkey_hash(session, LIBSSH2_HOSTKEY_HASH_SHA1);
-    printf("Fingerprint: ");
+    fprintf(stderr, "Fingerprint: ");
     for(i = 0; i < 20; i++) {
-        printf("%02X ", (unsigned char)fingerprint[i]);
+        fprintf(stderr, "%02X ", (unsigned char)fingerprint[i]);
     }
-    printf("\n");
+    fprintf(stderr, "\n");
 
     if (auth_pw) {
         /* We could authenticate via password */
@@ -239,7 +244,7 @@ int main(int argc, char *argv[])
 #else
     close(sock);
 #endif
-    printf("all done\n");
+    fprintf(stderr, "all done\n");
 
     libssh2_exit();
 

example/ssh2.c

@@ -72,10 +72,16 @@ int main(int argc, char *argv[])
     char *userauthlist;
     LIBSSH2_SESSION *session;
     LIBSSH2_CHANNEL *channel;
+
 #ifdef WIN32
     WSADATA wsadata;
+    int err;
 
-    WSAStartup(MAKEWORD(2,0), &wsadata);
+    err = WSAStartup(MAKEWORD(2,0), &wsadata);
+    if (err != 0) {
+        fprintf(stderr, "WSAStartup failed with error: %d\n", err);
+        return 1;
+    }
 #endif
 
     if (argc > 1) {
@@ -126,15 +132,15 @@ int main(int argc, char *argv[])
      * call
      */
     fingerprint = libssh2_hostkey_hash(session, LIBSSH2_HOSTKEY_HASH_SHA1);
-    printf("Fingerprint: ");
+    fprintf(stderr, "Fingerprint: ");
     for(i = 0; i < 20; i++) {
-        printf("%02X ", (unsigned char)fingerprint[i]);
+        fprintf(stderr, "%02X ", (unsigned char)fingerprint[i]);
     }
-    printf("\n");
+    fprintf(stderr, "\n");
 
     /* check what authentication methods are available */
     userauthlist = libssh2_userauth_list(session, username, strlen(username));
-    printf("Authentication methods: %s\n", userauthlist);
+    fprintf(stderr, "Authentication methods: %s\n", userauthlist);
     if (strstr(userauthlist, "password") != NULL) {
         auth_pw |= 1;
     }
@@ -161,31 +167,33 @@ int main(int argc, char *argv[])
     if (auth_pw & 1) {
         /* We could authenticate via password */
         if (libssh2_userauth_password(session, username, password)) {
-            printf("\tAuthentication by password failed!\n");
+            fprintf(stderr, "\tAuthentication by password failed!\n");
             goto shutdown;
         } else {
-            printf("\tAuthentication by password succeeded.\n");
+            fprintf(stderr, "\tAuthentication by password succeeded.\n");
         }
     } else if (auth_pw & 2) {
         /* Or via keyboard-interactive */
         if (libssh2_userauth_keyboard_interactive(session, username,
                                                   &kbd_callback) ) {
-            printf("\tAuthentication by keyboard-interactive failed!\n");
+            fprintf(stderr,
+                "\tAuthentication by keyboard-interactive failed!\n");
             goto shutdown;
         } else {
-            printf("\tAuthentication by keyboard-interactive succeeded.\n");
+            fprintf(stderr,
+                "\tAuthentication by keyboard-interactive succeeded.\n");
         }
     } else if (auth_pw & 4) {
         /* Or by public key */
         if (libssh2_userauth_publickey_fromfile(session, username, keyfile1,
                                                 keyfile2, password)) {
-            printf("\tAuthentication by public key failed!\n");
+            fprintf(stderr, "\tAuthentication by public key failed!\n");
             goto shutdown;
         } else {
-            printf("\tAuthentication by public key succeeded.\n");
+            fprintf(stderr, "\tAuthentication by public key succeeded.\n");
         }
     } else {
-        printf("No supported authentication methods found!\n");
+        fprintf(stderr, "No supported authentication methods found!\n");
         goto shutdown;
     }
 
@@ -235,7 +243,7 @@ int main(int argc, char *argv[])
 
     /* Other channel types are supported via:
      * libssh2_scp_send()
-     * libssh2_scp_recv()
+     * libssh2_scp_recv2()
      * libssh2_channel_direct_tcpip()
      */
 
@@ -250,7 +258,7 @@ int main(int argc, char *argv[])
 #else
     close(sock);
 #endif
-    printf("all done!\n");
+    fprintf(stderr, "all done!\n");
 
     libssh2_exit();
 

example/ssh2_agent.c

@@ -49,10 +49,16 @@ int main(int argc, char *argv[])
     LIBSSH2_CHANNEL *channel;
     LIBSSH2_AGENT *agent = NULL;
     struct libssh2_agent_publickey *identity, *prev_identity = NULL;
+
 #ifdef WIN32
     WSADATA wsadata;
+    int err;
 
-    WSAStartup(MAKEWORD(2,0), &wsadata);
+    err = WSAStartup(MAKEWORD(2,0), &wsadata);
+    if (err != 0) {
+        fprintf(stderr, "WSAStartup failed with error: %d\n", err);
+        return 1;
+    }
 #endif
 
     if (argc > 1) {
@@ -105,15 +111,15 @@ int main(int argc, char *argv[])
      * call
      */
     fingerprint = libssh2_hostkey_hash(session, LIBSSH2_HOSTKEY_HASH_SHA1);
-    printf("Fingerprint: ");
+    fprintf(stderr, "Fingerprint: ");
     for(i = 0; i < 20; i++) {
-        printf("%02X ", (unsigned char)fingerprint[i]);
+        fprintf(stderr, "%02X ", (unsigned char)fingerprint[i]);
     }
-    printf("\n");
+    fprintf(stderr, "\n");
 
     /* check what authentication methods are available */
     userauthlist = libssh2_userauth_list(session, username, strlen(username));
-    printf("Authentication methods: %s\n", userauthlist);
+    fprintf(stderr, "Authentication methods: %s\n", userauthlist);
     if (strstr(userauthlist, "publickey") == NULL) {
         fprintf(stderr, "\"publickey\" authentication is not supported\n");
         goto shutdown;
@@ -147,11 +153,11 @@ int main(int argc, char *argv[])
             goto shutdown;
         }
         if (libssh2_agent_userauth(agent, username, identity)) {
-            printf("\tAuthentication with username %s and "
+            fprintf(stderr, "\tAuthentication with username %s and "
                    "public key %s failed!\n",
                    username, identity->comment);
         } else {
-            printf("\tAuthentication with username %s and "
+            fprintf(stderr, "\tAuthentication with username %s and "
                    "public key %s succeeded!\n",
                    username, identity->comment);
             break;
@@ -211,7 +217,7 @@ int main(int argc, char *argv[])
 
     /* Other channel types are supported via:
      * libssh2_scp_send()
-     * libssh2_scp_recv()
+     * libssh2_scp_recv2()
      * libssh2_channel_direct_tcpip()
      */
 
@@ -234,7 +240,7 @@ int main(int argc, char *argv[])
 #endif
     }
 
-    printf("all done!\n");
+    fprintf(stderr, "all done!\n");
 
     libssh2_exit();
 

example/ssh2_echo.c

@@ -29,10 +29,13 @@
 #ifdef HAVE_ARPA_INET_H
 # include <arpa/inet.h>
 #endif
-
+#ifdef HAVE_SYS_TIME_H
 #include <sys/time.h>
+#endif
 #include <sys/types.h>
+#ifdef HAVE_STDLIB_H
 #include <stdlib.h>
+#endif
 #include <fcntl.h>
 #include <errno.h>
 #include <stdio.h>
@@ -91,8 +94,15 @@ int main(int argc, char *argv[])
 
 #ifdef WIN32
     WSADATA wsadata;
-    WSAStartup(MAKEWORD(2,0), &wsadata);
+    int err;
+
+    err = WSAStartup(MAKEWORD(2,0), &wsadata);
+    if (err != 0) {
+        fprintf(stderr, "WSAStartup failed with error: %d\n", err);
+        return 1;
+    }
 #endif
+
     if (argc > 1)
         /* must be ip address only */
         hostname = argv[1];
@@ -327,7 +337,7 @@ int main(int argc, char *argv[])
         }
 
         if (exitsignal)
-            printf("\nGot signal: %s\n", exitsignal);
+            fprintf(stderr, "\nGot signal: %s\n", exitsignal);
 
         libssh2_channel_free(channel);
         channel = NULL;